RE: [fluka-discuss]: Fluka installation on lxplus (SLC6)

From: Angela Benelli <>
Date: Wed, 28 May 2014 07:02:16 +0000

Ciao Vittorio, grazie !

would this also allow me to use Flair ?

thank you Angela
From: Dr. Vittorio Boccone []
Sent: 27 May 2014 21:31
To: Angela Benelli;
Subject: Re: [fluka-discuss]: Fluka installation on lxplus (SLC6)

Ciao Angela,
  in principle you can build both the 64 and the 32 bit versions.

You can build the standard 32 bit version with g77 (f<>luka2011.2b-linuxAA.tar.g<>z<>) just by by following the instruction in the README (define just FLUPRO). Just be sure to have enough space there....

You can also use the 64bit gfortran version (fluka2011.2b-linux-gfor64bitAA.tar.gz<>), but for that you need to use the scl ( which can easily be enabled on the lxplus shell by doing a

> scl enable devtoolset-2 bash

Dot' forget to define the environment variables "FLUFOR=gfortran" and "GFORFLU=$(which gfrtran)" which will tell FLUKA (once more) which gfortran to use.



On 5/27/14 4:37 PM, Angela Benelli wrote:

could you please advice me which version should i install on the lxplus (SLC6) ? any particular instruction to follow or should i use the
chapter 3 of the online manual ?
Comment Date Size
flupix-2011.2b-6_flair-2.0-1.iso<> FLUKA Package Version 2011.2b.1 30th of April, 2014 378 MB
fluka2011.2b-linuxAA.tar.gz<> FLUKA Package Version 2011.2b.6 8th of April, 2014 142 MB
fluka-2011.2b-6.i686.rpm<> rpm for fluka-2011.2b-6 21st of April, 2014 140 MB
fluka2011.2b-linux-gfor64bitAA.tar.gz<> FLUKA GFortran, 64 bits, Package Version 2011.2b.6 8th of April, 2014 154 MB
fluka-2011.2b-6.x86_64.rpm<> rpm for fluka-2011.2b-6 8th of April, 2014 144 MB

thank you very much Angela Benelli
Received on Wed May 28 2014 - 10:19:21 CEST

This archive was generated by hypermail 2.3.0 : Wed May 28 2014 - 10:19:23 CEST