RE: [fluka-discuss]: Fluka installation on lxplus (SLC6)

From: Vasilis Vlachoudis <Vasilis.Vlachoudis_at_cern.ch>
Date: Fri, 30 May 2014 07:04:14 +0000

Hi Angela,

could you verify that in the flair installation directory there are the files:
geoviewer.so
fonts/*

If not then you missed the "make install DESTDIR=/.." for the geoviewer

Otherwise please run flair from a terminal and see what error messages
are displayed there. That will provide us more hints on what went wrong.

Vasilis

________________________________________
From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of Mitja Majerle [majerle_at_ujf.cas.cz]
Sent: 28 May 2014 11:43
To: Angela Benelli
Cc: Vittorio Boccone; fluka-discuss_at_fluka.org
Subject: Re: [fluka-discuss]: Fluka installation on lxplus (SLC6)

Hello,

I would like to insert a remark about FLAIR here.
I also use SLC65, 32bit version of fluka (some extra i686 libraries are
needed to compile with g77).
I install FLAIR as non-root with make install DESTDIR=/..
Both FLAIR and FLAIR-GEOVIEWER compiled and installed to the DESTDIR,
but FLAIR won't run with geoviewer (it prints error at start and
geoviewer is disabled), it seems it expects it in default installation
directory.
Maybe somebody can fix this ?

M

On 5/28/2014 9:02 AM, Angela Benelli wrote:
> Ciao Vittorio, grazie !
>
> would this also allow me to use Flair ?
>
> thank you Angela
> ------------------------------------------------------------------------
> *From:* Dr. Vittorio Boccone [dr.vittorio.boccone_at_ieee.org]
> *Sent:* 27 May 2014 21:31
> *To:* Angela Benelli; fluka-discuss_at_fluka.org
> *Subject:* Re: [fluka-discuss]: Fluka installation on lxplus (SLC6)
>
> Ciao Angela,
> in principle you can build both the 64 and the 32 bit versions.
>
> You can build the standard 32 bit version with g77 (f
> <https://www.fluka.org/packages/fluka2011.2b-linuxAA.tar.gz>luka2011.2b-linuxAA.tar.g
> <https://www.fluka.org/packages/fluka2011.2b-linuxAA.tar.gz>z
> <https://www.fluka.org/packages/fluka2011.2b-linuxAA.tar.gz>) just by by
> following the instruction in the README (define just FLUPRO). Just be
> sure to have enough space there....
>
> You can also use the 64bit gfortran version
> (fluka2011.2b-linux-gfor64bitAA.tar.gz
> <https://www.fluka.org/packages/fluka2011.2b-linux-gfor64bitAA.tar.gz>),
> but for that you need to use the scl
> (http://linux.web.cern.ch/linux/devtoolset/) which can easily be enabled
> on the lxplus shell by doing a
>
> > scl enable devtoolset-2 bash
>
> Dot' forget to define the environment variables *"FLUFOR=gfortran"*and
> *"GFORFLU=$(which gfrtran)"*which will tell FLUKA (once more) which
> gfortran to use.
>
> Cheers
>
> V&co.
>
>
>
>
>
> On 5/27/14 4:37 PM, Angela Benelli wrote:
>>
>> hello,
>> could you please advice me which version should i install on the
>> lxplus (SLC6) ? any particular instruction to follow or should i use the
>> chapter 3 of the online manual ?
>> Comment Date Size
>> flupix-2011.2b-6_flair-2.0-1.iso
>> <https://www.fluka.org/packages/flupix-2011.2b-6_flair-2.0-1.iso>
>> FLUKA Package Version 2011.2b.1 30th of April, 2014 378 MB
>> fluka2011.2b-linuxAA.tar.gz
>> <https://www.fluka.org/packages/fluka2011.2b-linuxAA.tar.gz> FLUKA
>> Package Version 2011.2b.6 8th of April, 2014 142 MB
>> fluka-2011.2b-6.i686.rpm
>> <https://www.fluka.org/packages/fluka-2011.2b-6.i686.rpm> rpm for
>> fluka-2011.2b-6 21st of April, 2014 140 MB
>> fluka2011.2b-linux-gfor64bitAA.tar.gz
>> <https://www.fluka.org/packages/fluka2011.2b-linux-gfor64bitAA.tar.gz> FLUKA
>> GFortran, 64 bits, Package Version 2011.2b.6 8th of April, 2014 154 MB
>> fluka-2011.2b-6.x86_64.rpm
>> <https://www.fluka.org/packages/fluka-2011.2b-6.x86_64.rpm> rpm for
>> fluka-2011.2b-6 8th of April, 2014 144 MB
>>
>>
>> thank you very much Angela Benelli
>
Received on Fri May 30 2014 - 10:20:28 CEST

This archive was generated by hypermail 2.3.0 : Fri May 30 2014 - 10:20:29 CEST