Re: [fluka-discuss]: error

From: Paola Sala <paola.sala_at_mi.infn.it>
Date: Mon, 24 Nov 2014 08:55:36 +0100

Questo non sa de che parte cominciare, mi ha gia' torturata sulla
registrazione, si lamentava perche' non gli arrivavano i mail salvo
scoprire che usava due indirizzi in alternanza, e uno dei due non era
valido...
Poi e' passato alle domande linux, prima voleva compilare senza avere
installato il compilatore, poi "Alright I created executable files both
flukahp and flukadpm3. It might be a silly question, but I am
inexperienced Linux user. How do I run them? When I try to double-click
those files nothing happens same as I do right-click and choose run. "..
auguri

> Hi Vittorio,
>
> I did start with beginner's manual, that's how I run the protons in Be
> simulation. And the thing is that I fail to run the example simulation
> and I cannot find an answer to my issue.
> I took advantage of your advice and changed file names.
> This time I attached .flair and .inp files.
> I am using Fedora just for purpose of fluka, i have no other documents
> on this partition, that's why i didn't create a separate folder.
>
> I am just worried if it is not the problem of some root access rights or
> something, due to "no access" sign in the lines I gave You.
>
> All best,
> Karol
>
>
> W dniu 2014-11-22 16:41, Vittorio Boccone napisał(a):
>> Hi [karkawal],
>> I understand you are a beginner, but maybe you should really start
>> from the manual. There's a beginner chapter there.
>> Plus, you can access to all the presentation *and examples) done in
>> the FLUKA courses on the website.
>>
>> I renew my request of sending the input and flair files (*.inp and
>> *.flair). Without those I can't help. The screenshots alone are not
>> useful for debugging.
>> An other important thing: I would give a shorter name to the input
>> file, maybe without spaces.
>>
>> Place those files in a separate directory. FLUKA creates several file
>> which you probably don't want to mix up with other documents you have
>>
>> Best,
>> Vittorio
>>
>> P.S. I don't understand why you add Lars Froehlich in cc. Please add
>> always the list "fluka-discuss_at_fluka.org" <fluka-discuss_at_fluka.org>
>> instead.
>>
>>
>> On 11/22/2014 4:53 PM, karkawal_at_student.pg.gda.pl wrote:
>>> Thank You, it solved the problem with geometry error. I didn't
>>> understand the meaning of | sign before. But I still cannot run my
>>> simulation. I've already sent that problem to the list. Maybe You
>>> could help me with that? Once I run the simulation it's "running" for
>>> a while and then it says "*** TIMED-OUT ***". I attached the
>>> screenshot with that. My previous mail to the list didn't have that
>>> geometry issue corrected. In the folder that was created when I
>>> pressed run i found a log, that says:
>>> /home/kkawalerczyk/fluka/flutil/rfluka: line 300:
>>> /home/kkawalerczyk/Dokumenty/Charged pion fluence inside and around a
>>> proton-irradiated Be target.out: Brak dostępu (which means no access
>>> in english)
>>> Do You have any clue what might that be?
>>>
>>> W dniu 2014-11-22 14:50, Vittorio Boccone napisał(a):
>>>> Hi [karkawal],
>>>> please reply to both me and the list at the same time so to keep
>>>> the discussion on the list.
>>>> The error lies in the | (OR sign) that you place in the definition
>>>> of
>>>> the UpstrBe and DwnnstrBe regions.
>>>> What you have now is two regions which include all what is rightof
>>>> "cutplane" plus "betarget". You have therefore a lot of overlapping
>>>> regions and this is not good.
>>>>
>>>> That sign must be removed. In addition one of the two regions should
>>>> have a "+cutplane" instead of a "-cutplane" otherwise you end up
>>>> having the same region.
>>>>
>>>>> UpstrBe 5 +betarget
>>>>> | -cutplane
>>>>> DwnstrBe 5 +betarget
>>>>> | -cutplane
>>>> Best
>>>> V.
>>>>
>>>> On 11/22/2014 2:52 PM, karkawal_at_student.pg.gda.pl wrote:
>>>>
>>>>> Thank You for an answer. I actually did put one 0 too much for
>>>>> blackhole and vacuum, but I changed that and errors found is still
>>>>> there. I tried also to run a simulation and after a couple minuter
>>>>> status says timed out.
>>>>>
>>>>> W dniu 2014-11-22 13:22, Vittorio Boccone napisał(a):
>>>>> Hi,
>>>>> well I can say that first you are very very far away from the
>>>>> simulation region (about 10E8 off).
>>>>> Most probably you have a macroscopic error in the definitions of
>>>>> the regions.
>>>>>
>>>>> I can't see much from the geoviewer plot if you don't attach the
>>>>> FLUKA
>>>>> input file.
>>>>>
>>>>> Best
>>>>> Vittorio
>>>>>
>>>>> On 11/21/2014 10:24 PM, karkawal_at_student.pg.gda.pl wrote:
>>>>> Hi,
>>>>> I'm a fluka beginner, and got worried with sign "Errors found" in
>>>>> geometry tab in flair. I'm making an input file for example
>>>>> simulation of protons in Beryl as in manual and I wonder if there
>>>>> actually is wrong with my input file. I've checked output and it
>>>>> doesn't say anything. Could anyone tell me if I'm doing something
>>>>> wrong? I attached screenshot.


Paola Sala
INFN Milano
tel. Milano +39-0250317374
tel. CERN +41-227679148
Received on Mon Nov 24 2014 - 10:17:54 CET