Hello everyone,
I am getting warning messages such as the one below for different
materials in my setup. (in this case, medium 62 is air).
I am seeing this warning in other materials such as soil, different
concrete compositions, carbon steel, Tantalum, Copper, ...
Should these messages be ignored? I found a similar message on the
forum dated (Feb 2004). The answer by Alfredo was 'the warning is
completely harmless!'
Is it still the case if I am seeing the warnings for multiple media?
Thanks in advance,
Mina
*
**** Subroutine Mulmix: medium n. 62 ****
Number of elements = 4, Density= 1.204790E-03 (g/cm**3)
0 I Z Pa F_i Rho_i
Index Atomic Atomic Proportion Proportion
Number Weight by Number by weight
1 6.00000 12.0110 1.501907E-04 1.493977E-07
2 7.00000 14.0067 0.784430 9.099383E-04
3 8.00000 15.9994 0.210749 2.792483E-04
4 18.0000 39.9480 4.671156E-03 1.545402E-05
ZTILDE,AE1O3,BLCCRA= 7.56378E+00 2.51981E+00 9.97356E-03
**** Warning!!! Least square fit for blccre failed to keep max. rel.
Blcce err. below 1% ****
**** Max. error is 1.1 %, for beta2 = 0.00358 ****
ZTILDE,AE1O3,BLCCRE= 6.53933E+00 2.51981E+00 1.04505E-02
BLCC,XCC,TFFLU0,XR0FLU= 7.70398E+00 2.63537E-05 8.69055E-01
4.25526E-05
BLCCE,XCCE,TFEMF0,XR0EMF= 8.76462E+00 2.80872E-02 2.28234E+00
9.00129E-02
Particle n.: -6 Ecutm (prim. & sec.) = 3.747 GeV 3.747
GeV, Hthnsz = 1.0000E+30 GeV
Particle n.: -5 Ecutm (prim. & sec.) = 2.828 GeV 2.828
GeV, Hthnsz = 1.0000E+30 GeV
Particle n.: -4 Ecutm (prim. & sec.) = 2.829 GeV 2.829
GeV, Hthnsz = 1.0000E+30 GeV
Particle n.: -3 Ecutm (prim. & sec.) = 1.896 GeV 1.896
GeV, Hthnsz = 1.0000E+30 GeV
Particle n.: 1 Ecutm (prim. & sec.) = 0.9583 GeV 0.9583
GeV, Hthnsz = 1.0000E+30 GeV
Particle n.: 2 Ecutm (prim. & sec.) = 0.9583 GeV 0.9583
GeV, Hthnsz = 1.0000E+30 GeV
Particle n.: 3 Ecutm (prim. & sec.) = 2.0511E-02 GeV 2.0511E-02
GeV, Hthnsz = 1.0000E+30 GeV
Particle n.: 4 Ecutm (prim. & sec.) = 2.0511E-02 GeV 2.0511E-02
GeV, Hthnsz = 1.0000E+30 GeV
*
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Apr 30 2015 - 00:48:05 CEST