RE: [fluka-discuss]: USRBIN DOSE-EQ units

From: Joachim Vollaire <>
Date: Mon, 25 Apr 2016 08:55:44 +0000

Maybe the best would be to send the input file and the detector(s) for which you are wondering about the normalization.


From: [] On Behalf Of NKANYISO ROBERT Mantengu
Sent: 25 April 2016 09:33
To:; Vasilis Vlachoudis <>
Subject: Re: [fluka-discuss]: USRBIN DOSE-EQ units

Dear Vasilis,
The thing is with DCYSCORE set to Semi-analogue mode, the detector turn to score both prompt and decay particles combined.
And my problem is how to present the units of this combination.
Nkanyiso R. Mantengu

On Mon, Apr 25, 2016 at 8:44 AM, Vasilis Vlachoudis <<>> wrote:
Dear Nkanyiso,

all quantities in the decay part of the calculation are expressed per unit time pSv/s.
In the prompt part of the calculation are expressed as pSv/primary

From:<> [<>] on behalf of NKANYISO ROBERT Mantengu [<>]
Sent: Sunday, April 24, 2016 16:03
Cc: Joachim Vollaire
Subject: [fluka-discuss]: USRBIN DOSE-EQ units
Dear FLUKA users,
I have a confusion with the units of the USRBIN DOSE-EQ scoring detector.
I have set the USRBIN DOSE-EQ scoring detector associated with DCYSCORE in Semi-analogue mode since I want to score prompt-decay particles, and I have also defined the irradiation profile using IRRPROFIle card.
So I'm confused if my units for DOSE-EQ should be in pSv per unit primary weight, since my DCYSCORE is in Semi-analogue mode, or they are expressed in pSv/s, since I have define the irradiation profile.
And if the units are expressed in pSv per unit primary weight, can I just multiply with my beam current (in prim/s) to get pSv/s, or I should multiply with the total particle statistical weight, which is the number of events requested, to get pSv.
Any suggestion will be appreciated.
Thanks in advance
Nkanyiso R. Mantengu.

You can manage unsubscription from this mailing list at
Received on Mon Apr 25 2016 - 12:10:52 CEST

This archive was generated by hypermail 2.3.0 : Mon Apr 25 2016 - 12:10:53 CEST