Dear Vittorio,
Thanks for your suggestion, I will consider it carefully.
Best Regards
Tao Yang
> -----原始邮件-----
> 发件人: "Vittorio Boccone" <dr.vittorio.boccone_at_ieee.org>
> 发送时间: 2016年9月23日 星期五
> 收件人: "Mikhail Polkovnikov" <pmk_at_ihep.ru>
> 抄送: "Anna Ferrari" <a.ferrari_at_hzdr.de>, "Nima Ghal-Eh" <Nima.Ghal-Eh_at_fuw.edu.pl>, "YANG Tao" <yangt_at_ihep.ac.cn>, "fluka-discuss_at_fluka.org" <fluka-discuss_at_fluka.org>
> 主题: Re: [fluka-discuss]: Problem in plotting usrbin and geometry
>
> Hi Mikhail, Nima and Yang Tao and others
> there’s no need to beg for the answer... From the old thread I see Tao Yang seems to acknowledge Stefan’s answer and the issue seemed close. Just ask again if the answer is not clear.
>
> This is minor flupix issue, not a fluka nor flair bug. The problem is related to the gnuplot 5 auto-range determination of the color scale axis (cbaxes) fails. A good mitigation option (as already suggested) for the colour scale problem is to chose yourself the range (mind the log scale, you can’t start from 0...)
>
> Another elegant solution is to perform the same plot using geoedit by adding a USRBIN layer link to the quantity you desired to plot.
>
> _at_Yang Tao, An important comment for you: you have really a lot of parentheses and the initialisation of the simulation takes quite a bit of time. I would really suggest to simplify you geometry definition (the definition not the geometry itself)
>
> Best V.
>
>
>
> > On 21 Sep 2016, at 14:12, Mikhail Polkovnikov <Михаил Полковников> wrote:
> >
> > On 21.09.2016 13:39, Anna Ferrari wrote:
> >> Hello Nima,
> >>
> >> in order to check your problem, can you send us your input file? (the two USRBIN plots -with and without geometry option enabled- are also useful).
> >> Are you running via Flupix or are you using a Linux distribution?
> >> I would like to see if it could be an installation -related problem (as it presumably was the case of Yang Tao) or not.
> >>
> >> Thanks,
> >> Anna
> >>
> >> Am Tue, 20 Sep 2016 23:27:29 +0330 schrieb Nima Ghal-Eh <Nima.Ghal-Eh_at_fuw.edu.pl>:
> >>> Dear FLUKA experts,
> >>>
> >>> I would like to plot the usrbin output together with the geometry so I select “Geometry Use” option “-Auto-” in FLAIR plot tool but it doesn’t work properly (it is pink out everywhere which means zero values). There is no problem with “Geometry Use” option “-No-“ in which one can only plot the usrbin output (i.e., without geometry). Could you please help me how to resolve this problem?
> >>>
> >>> Sincerely,
> >>> Nima.
> >>>
> >>> __________________________________________________________________________
> >>> You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
> >>>
> >>
> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> Dr. Anna Ferrari
> >> Institute of Radiation Physics
> >> Helmholtz-Zentrum Dresden-Rossendorf e.V.
> >> Tel. +49 351 260 2872
> >> a.ferrari_at_hzdr.de
> >> http://www.hzdr.de
> >>
> >> Vorstand: Prof. Dr. Dr. h. c. Roland Sauerbrey, Prof. Dr. Dr. h. c. Peter
> >> Joehnk
> >> Vereinsregister: VR 1693 beim Amtsgericht Dresden
> >>
> >> __________________________________________________________________________
> >> You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
> >
> >
> > Dear Anna, Nima and Tao Yang,
> >
> > It could be the problem with gnuplot. I have the same problem with the latest gnuplot version 5, previous version 4.6 works fine. There are files in attachment with gnuplot version 4.6.3 and 5.0.3. Current FLUPIX release has the same problem with USRBIN.
> >
> >
> > Best regards,
> >
> > Mikhail
> >
> > <gnuplot_4.6.3_GeometryAuto.jpg><gnuplot_5.0.3_GeometryAuto.png><gnuplot_5.0.3_GeometryNo.png>
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?idc_info
Received on Fri Sep 23 2016 - 08:32:48 CEST