RE: [fluka-discuss]: Minimium

From: Masoomeh Yarmohammadi Satri <masoomeh.yarmohammadi.satri_at_cern.ch>
Date: Wed, 22 Feb 2017 10:15:09 +0000

Dear George, Many thanks for your email. I tried for 45keV electron on a Cu target. I receive no data. If there is a problem in the file? Or it is the matter of low energy, Cu target and Fluka with this energy? If Yes, If you propose other simulation code for this energy and target? Regards, Masoomeh ________________________________________ From: George Kharashvili [georgek_at_jlab.org] Sent: 20 February 2017 15:53 To: Masoomeh Yarmohammadi Satri Cc: FLUKA Discussion List Subject: Re: [fluka-discuss]: Minimium Dear Masoomeh, The low limit of electron transport is 1 keV. However, modeling of 45 keV electron beam interaction with matter requires special care. From FLUKA manual Chapter 1.1.7: "The minimum recommended energy for PRIMARY electrons is about 50 to 100 keV for low-Z materials and 100-200 keV for heavy materials, unless the single scattering algorithm is used." Best regards, George ----- Original Message ----- From: "Masoomeh Yarmohammadi Satri" <masoomeh.yarmohammadi.satri_at_cern.ch> To: "FLUKA Discussion List" <fluka-discuss_at_fluka.org> Sent: Monday, February 20, 2017 8:38:53 AM Subject: [fluka-discuss]: Minimium Dear All, If there is a minimum level of energy for defining as beam energy in Fluka. If Fluka is useful for 45keV electron beam energy hitting a target? Best regards, Masoomeh


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

Received on Wed Feb 22 2017 - 12:39:44 CET

This archive was generated by hypermail 2.3.0 : Wed Feb 22 2017 - 12:40:08 CET