Re: [fluka-discuss]: Coversion of DICOM image into voxel phantom

From: Santana, Mario <msantana_at_SLAC.Stanford.EDU>
Date: Tue, 7 Mar 2017 18:29:06 +0000

Hi Subha,

There are some default files in flair/dicom directory (e.g. /usr/local/flair/dicom/) that you can use:

MATERIAL: material.inp
UNIT TO MATERIAL: body.mat OR head

You may find the following link useful:
https://indico.cern.ch/event/540415/contributions/2194791/attachments/1285764/2086130/17_Medical_Applications_2016.pdf

-Mario

On 3/7/17, 2:00 AM, "owner-fluka-discuss_at_mi.infn.it on behalf of subha_at_barc.gov.in" <owner-fluka-discuss_at_mi.infn.it on behalf of subha_at_barc.gov.in> wrote:

    Dear all,
    
    I am a beginner of FLUKA code.
    I want to convert DICOM images into voxel phantom using FLAIR.
    I could load the DICOM images. I am struck at the vOXEL tab.
    In order to convert the data set to voxel format i need two additional
    files related to material.Should i generate those files.
    Kindly guide how to proceed further.
    
    
    
    With Regards
    Subha
    
    __________________________________________________________________________
    You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
    
    

                                                       Ў(╣╞зЩй┌Быз▓цьr╕й╢*'~║&╢мЩиеКx%К╦Z╢mж╧   0¤∙nСпшо▀Цщ■Шi■'i╟ Кwш
Received on Tue Mar 07 2017 - 20:27:42 CET

This archive was generated by hypermail 2.3.0 : Tue Mar 07 2017 - 20:27:46 CET