Dear Stefan,
Firstly, thank you very much for your answer. My question was the second
option. About the usrbin with what(1)=8, I do not quite understand how to
set the third variable (float type) of special binning in my case.
Best regards,
Guang
·¢¼þÈË: owner-fluka-discuss_at_mi.infn.it
[mailto:owner-fluka-discuss_at_mi.infn.it] ´ú±í Stefan Roesler
·¢ËÍʱ¼ä: 2017Äê6ÔÂ20ÈÕ 21:52
ÊÕ¼þÈË: zhaog_at_ihep.ac.cn; fluka-discuss_at_fluka.org
Ö÷Ìâ: RE: [fluka-discuss]: Scoring for lattice structure
Dear Guang
If you use a region-independent USRBIN scoring (e.g. Cartesian or
cylindrical) it will only score in the wire at the position of the scoring
mesh (no matter whether overlaid on prototype or replica). If you want to
score with USRBIN by region you can use the ¡°special binning¡± option
What(1)=8 (please see manual for the other what values in this case).
From what I understand from your question the second option (special
scoring) is probably what you need.
Cheers
Stefan
From: owner-fluka-discuss_at_mi.infn.it <mailto:owner-fluka-discuss_at_mi.infn.it>
[mailto:owner-fluka-discuss_at_mi.infn.it] On Behalf Of Guang Zhao
Sent: 19 June 2017 03:50
To: fluka-discuss_at_fluka.org <mailto:fluka-discuss_at_fluka.org>
Subject: [fluka-discuss]: Scoring for lattice structure
Dear fluka experts,
I have a complicated geometry which is consist of many small sub-structures
as showing in the attached figure. To represent them in fluka, I use the
lattice command (first 3 columns in yellow are the prototype, others in blue
are the copies). So the question is that if I use usrbin for one of the wire
in prototype, does it score the sum of the energy deposition of the
prototype and all the copies? Then how to scoring individual wires for the
copied lattice?
Thanks in advance,
Guang
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Wed Jun 21 2017 - 10:44:41 CEST