Dear Joachim,
Thank You for help! In both cases in the output I filtered all particles by
electrons (I hope I have done it correctly). For the simulation without
RADDECAY card I used main energy line of radium 226. For simulation with
RADDECAY card I used radioisotope of radium 226. I attached both of my
input files.
Best regards,
Agnieszka
2018-04-03 22:23 GMT+02:00 Joachim Vollaire <joachim.vollaire_at_cern.ch>:
> Dear Agnieszka
>
>
>
> Looking at the output, it looks like you have a high energy beam as
> primary particle. So with no RADDECAY card, if you score ALLPART (I can't
> tell from the information you provide), you will get the contribution from
> the "prompt part" of the transport (contribution of secondary particles
> with high energy depending on the initial beam properties) and the
> contribution of radioactive nuclei decay (photons, electrons, positrons
> emitted following the radioactive decay with typical energies lower than a
> few MeV).
>
>
>
> Now if you have the RADDECAY (and maybe DCYSCORE associated to the scoring
> card ?), then you will filter the contribution of the prompt part and score
> only the contribution of particles from the radioactive decay. As it
> involves the nuclei de-excitation it explains why the contribution only
> appears in the lowest energy bin. If this is not the possible explanation,
> better to send your input file.
>
>
>
> Hoping this help
>
> Joachim
>
>
>
>
>
>
> ------------------------------
>
> *From:* owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it]
> on behalf of Agnieszka Witkowska [witkowskaagnieszka07_at_gmail.com]
> *Sent:* 03 April 2018 21:18
> *To:* FLUKA discussion
> *Subject:* [fluka-discuss]: RADDECAY output
>
> Dear Fluka Users,
>
>
>
> I do not understand how to read the output while using RADDECAY card. I am
> using USRTRACK card for scoring and I am obtaining results only in one bin:
>
>
>
> [image: Obraz w treści 1]
>
>
>
> and without RADDECAY in all bins:
>
>
>
> [image: Obraz w treści 2]
>
>
>
> Can You please explain what is the reason behind it?
>
>
>
> Best regards,
>
> Agnieszka
>
>
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Wed Apr 04 2018 - 23:58:58 CEST