Please refer to the message in the list
http://www.fluka.org/web_archive/earchive/new-fluka-discuss/11755.html
Best, luigi
On 14 Jun 2018, at 11:42, mrakbari2015_at_ast.ui.ac.ir<mailto:mrakbari2015_at_ast.ui.ac.ir> wrote:
Dear FLUKA Experts and Users,
I installed the latest version of FLUKA and flair(fluka-2011.2x-2.x86_64.rpm, flair-2.3-0<
http://www.fluka.org/flair/index.html>). when I am going to run a program which ran before without any problem. I have an erro which I did not see in the run proccess in advance. The error is as follows:
*** Atomic electron contribution to mcs for material 26(AIR ) set to 0, are you sure? ***
*** if so re-enter it as 1.E-05 and run again, if not check the manual for the ***
*** EMFCUT card, PROD-CUT, what(3), execution stopped meanwhile ***
please let me know what the problem is?
Best Wishes
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Jun 14 2018 - 13:23:52 CEST