Dear Paola,
thank you very much, you were completely right, the space was the cause of the problem.
Thank you for your help
Best Regards
Emilio Ciuffoli
> -----Original Messages-----
> From: "Paola Sala" <paola.sala_at_mi.infn.it>
> Sent Time: 2020-09-29 21:03:54 (Tuesday)
> To: emilio <emilio_at_impcas.ac.cn>
> Cc: paola.sala_at_mi.infn.it, fluka-discuss_at_fluka.org
> Subject: Re: Re: [fluka-discuss]: Problem using last version of FLUKA with Ubuntu 18.04
>
> Hello
> If I see correctly, the name of your directory has a space in it. This
> will completely confuse the procedure, that will "see" the last part of
> the directory name as a separate parameter.
> Please rename it to, for instance, Water_Target or WaterTae=rget
> Hope this solves the problem
>
> Paola
> > Dear Paola,
> >
> > thank you very much for your answer.
> >
> > The code I sent was written several years ago (2017, I think), and it was
> > running at the time, however it seems that it's not compatible with the
> > new version of FLUKA/Flair anymore. I corrected all the mistakes you
> > pointed out (I directly eliminated all the Flair expressions, see the
> > attached file Water-Target.inp), but it still does not run; if I try to
> > run from terminal I get the same problem (no results and a very long .out
> > file), moreover the terminal output is the following:
> >
> > emilio_at_Sauron:~/Fluka-Simulation/piDAR/Water Target$ $FLUPRO/flutil/rfluka
> > -M1 -N0 Water-Target &
> > [7] 12850
> > emilio_at_Sauron:~/Fluka-Simulation/piDAR/Water Target$ $TARGET_MACHINE =
> > Linux
> > $FLUPRO = /home/emilio/Fluka
> > /home/emilio/Fluka/flutil/rfluka: 148: [:
> > /home/emilio/Fluka-Simulation/piDAR/Water: unexpected operator
> >
> > Initial seed already existing
> > Running fluka in /home/emilio/Fluka-Simulation/piDAR/Water
> > Target/fluka_12850cp: target 'Water' is not a directory
> > ln: target 'fort.1' is not a directory
> > /home/emilio/Fluka/flutil/rfluka: 262: [:
> > /home/emilio/Fluka-Simulation/piDAR/Water: unexpected operator
> > /home/emilio/Fluka/flutil/rfluka: 262: [:
> > /home/emilio/Fluka-Simulation/piDAR/Water: unexpected operator
> > /home/emilio/Fluka/flutil/rfluka: 262: [:
> > /home/emilio/Fluka-Simulation/piDAR/Water: unexpected operator
> > /home/emilio/Fluka/flutil/rfluka: 262: [:
> > /home/emilio/Fluka-Simulation/piDAR/Water: unexpected operator
> > /home/emilio/Fluka/flutil/rfluka: 269: [:
> > /home/emilio/Fluka-Simulation/piDAR/Water: unexpected operator
> > /home/emilio/Fluka/flutil/rfluka: 275: [:
> > /home/emilio/Fluka-Simulation/piDAR/Water: unexpected operator
> >
> > ================================ Running FLUKA for cycle # 1
> > =============================================
> > emilio_at_Sauron:~/Fluka-Simulation/piDAR/Water Target$
> >
> > Do you have any idea what could be the problem?
> >
> > To complicate even further the matter, I also wrote a very simple code,
> > just to test that everything is working in a very simplified setting (see
> > the attached file TestOldFlair.inp) and I'm able to run it without any
> > problem using Flair (I didn't try to run by terminal, because it seems not
> > relevant in this case).
> >
> > Thank you for your help
> > BEst Regards
> > Emilio Ciuffoli
> >
> >> -----Original Messages-----
> >> From: "Paola Sala" <paola.sala_at_mi.infn.it>
> >> Sent Time: 2020-09-28 22:03:56 (Monday)
> >> To: emilio <emilio_at_impcas.ac.cn>
> >> Cc: fluka-discuss_at_fluka.org
> >> Subject: Re: [fluka-discuss]: Problem using last version of FLUKA with
> >> Ubuntu 18.04
> >>
> >> Hello
> >> the strange thing is that the input you sent could never run, and the
> >> run
> >> should crash while reading the input, well before reaching the start
> >> card.
> >> There are FLAIR expressions in it: in orted to have FLUKA digest them,
> >> uone should add a GLOBAL card with sdum=OLDFLAIR
> >> The PHYSICS COALESCENCE card is empty, would not be accepted: what(1)
> >> should be set to +1 or -1
> >> There are estimators with repeated names: this is no longer accepted (to
> >> avoid mistakes)
> >>
> >> Maybe you can try to run the input outside flair, to be sure of what is
> >> really taken as input:
> >>
> >> $FLUPRO/flutil/rfluka -M1 -N0 Water-Target &
> >> (& is to run it in the background)
> >>
> >>
> >> Hope this helps
> >> Paola
> >>
> >> > Dear FLUKA experts,
> >> >
> >> >
> >> >
> >> >
> >> > I have some problems running the latest release of FLUKA in Ubuntu
> >> 18.04.
> >> >
> >> >
> >> >
> >> >
> >> > I used FLUKA some years ago (at least until 2017) without any problem;
> >> > recently I started a new project that requires some simulations, so I
> >> > installed the last version of FLUKA and Flair, however I had some
> >> > problems.
> >> >
> >> >
> >> >
> >> >
> >> > First I was getting the error (in the file .log) "Fortran runtime
> >> error:
> >> > Incorrect extent in VALUE argument to DATE_AND_TIME intrinsic: is -2,
> >> > should be >=8"
> >> >
> >> >
> >> >
> >> >
> >> > Googoling a bit, I found out that the problem was that I had the wrong
> >> > version of gfortran (7.5). Indeed, even if I had installed both
> >> gfortran-7
> >> > and gfortran-8, the command "gfortran" was likend by default to
> >> version 7.
> >> > Namely:
> >> >
> >> >
> >> >
> >> >
> >> > emilio_at_Sauron:~/Fluka$ gfortran
> >> > gfortran gfortran-7 gfortran-8
> >> > emilio_at_Sauron:~/Fluka$ gfortran --version
> >> > GNU Fortran (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
> >> > Copyright (C) 2017 Free Software Foundation, Inc.
> >> > This is free software; see the source for copying conditions. There
> >> is NO
> >> > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
> >> > PURPOSE.
> >> >
> >> >
> >> > (there were some problems while running make, I was getting some fatal
> >> > errors, but I didn't notice at the beginning)
> >> >
> >> > I'm not very familiar with Linux, but I Googled a bit more and I was
> >> able
> >> > to change the version of gfrotran linked to the command using
> >> >
> >> >
> >> >
> >> >
> >> > sudo update-alternatives --install /usr/bin/gfortran gfortran
> >> > /usr/bin/gfortran-8 60
> >> >
> >> > sudo update-alternatives --install /usr/bin/gfortran gfortran
> >> > /usr/bin/gfortran-7 40
> >> >
> >> > sudo update-alternatives --config /gfortran
> >> >
> >> >
> >> >
> >> >
> >> > In this way I got
> >> >
> >> > emilio_at_Sauron:~/Fluka$ gfortran --version
> >> > GNU Fortran (Ubuntu 8.4.0-1ubuntu1~18.04) 8.4.0
> >> >
> >> >
> >> >
> >> >
> >> > Now I'm able to install FLUKA correctly (I get no more fatal errors),
> >> > however my code still not cannot run.
> >> >
> >> >
> >> >
> >> >
> >> > Currently, if I try to run a FLUKA code (via Flair), I have an error
> >> in
> >> > the .out file, it will says " Unexpected end of input: START
> >> assumed"
> >> > so many7 times that the .out file will increase very rapidly in size
> >> until
> >> > I kill the process or it fills the entire HD.
> >> >
> >> >
> >> >
> >> >
> >> > I tried to run again some old code, that was working with the previous
> >> > version of FLUKA, but I got the same results. In the attached files
> >> you
> >> > can find the input card and a "reduced" copy of the output file (I
> >> just
> >> > kept the first error line and cut all the rest, since otherwise it
> >> would
> >> > have been several GB). Please notice also that, in the temporary
> >> folder
> >> > created by Flair, the input card is present but empty, I have no idea
> >> > whether this is relevant or not.
> >> >
> >> >
> >> >
> >> >
> >> > I should mention that I had some problems during the installation of
> >> > geoviewer for Flair, I found an answer on this mailing list
> >> > (
http://www.fluka.org/web_archive/earchive/new-fluka-discuss/13766.html)
> >> > regarding a similar problem and I followed the instructions, changing
> >> > manually pow10 -> exp10 in some files (of geoviewer, not FLUKA) to fix
> >> the
> >> > problem, however I cannot see how this could create my current
> >> problem.
> >> >
> >> >
> >> >
> >> >
> >> > Do you have any suggestions? Does anyone else had a similar problem?
> >> >
> >> >
> >> >
> >> >
> >> > Thank you very much for your help
> >> >
> >> > Best Regards
> >> >
> >> > Emilio Ciuffoli
> >>
> >>
> >> Paola Sala
> >> INFN Milano
> >> tel. Milano +39-0250317374
> >> tel. CERN +41-227679148
> >>
> >> __________________________________________________________________________
> >> You can manage unsubscription from this mailing list at
> >>
https://www.fluka.org/fluka.php?id=acc_info
> > </emilio_at_impcas.ac.cn></paola.sala_at_mi.infn.it>
>
>
> Paola Sala
> INFN Milano
> tel. Milano +39-0250317374
> tel. CERN +41-227679148
>
> __________________________________________________________________________
> You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
</emilio_at_impcas.ac.cn></paola.sala_at_mi.infn.it>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Wed Sep 30 2020 - 12:58:00 CEST