Dear Vahan
The material range in PHOTONUC should be from WHAT(4)=VACUUM to
WHAT(5)=LEAD, i.e. from lower to upper index (VACUUM has index 2 and LEAD
has index 17, see manual chapter 5.2), not vice versa.
Furthermore, I suggest that you shorten the inelastic interaction length
for photons (i.e. for photoproduction) in order to get neutrons within a
reasonable CPU. This is typically done with the following card
LAM-BIAS 0.0 0.02 0.0 PHOTON
Cheers
Stefan
On Fri, 8 Jun 2012, Vahan Petrosyan wrote:
> Hi I am new in fluka and want to calculate (as a test) beam dump on lead target that surrounded by
> concrete.I made geometry using SimpleGeo and debugged it successfully.
> Problem is I can't get the result of usrtrack card for NEUTRONS and it always gives ZEROES .
>
> I am asking anybody with experience to check my input file and help me to obtain neutrons fluence
> ( it is small one).
>
> below I attached my fluka input file and SimpleGeo DAT file.
>
> Thanks!
>
>
Received on Fri Jun 08 2012 - 23:37:10 CEST
This archive was generated by hypermail 2.2.0 : Fri Jun 08 2012 - 23:37:41 CEST