Dear FLUKA experts and users,
I have two simple points to clarify which I am not tracing out.
Firstly, I have an electron beam dump in a room and I want to see dose rate around the beam dump and
around the walls. In the dose rate contour plots, one is attached with this email, I am seeing the boundaries'/dimensions
of the wall and not seeing the boundaries/dimensions of the beam dump, although the beam dump is not so small, about
50 cm radius and 100 cm long. I have seen a few presentations , like from Anna Ferrari, etc where they have same type of
plots and dimensions can be clearly seen. How can I improve my contour plots?
Secondly, I am using RCC to define cylinders along z-axis , etc. If cylinders are not along z-axis but making an angle say 45
degree with z-axis then can it is possible using RCC or any other option to rotate cylinders? Similar is the case for beam direction,
at 45 degree angle with z-axis.
If any body can comment on these, thank you in advance.
Best regards,
Zafar Yasin
ELI
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Tue May 26 2015 - 11:10:13 CEST