Dear Stefan
Thank you for your commenting,the source code and the input files were attached, If my input file is corrected , I confused why I can get such results in the previous email ?
Best regards
Bo Yang
-----原始邮件-----
发件人: "杨博" <b-yang12_at_mails.tsinghua.edu.cn>
发送时间: 2015-09-15 08:57:17 (星期二)
收件人: "Stefan Roesler" <sroesler_at_mail.cern.ch>
抄送: fluka-discuss_at_fluka.org
主题: Re: Re: [fluka-discuss]: A very strange simulation result by USRBDX
Dear Stefan
Thank you for your commenting,the source code and the input files were attached, If my input file is corrected , I confused why I can get such results in the previous email ?
Best regards
Bo Yang
> -----原始邮件-----
> 发件人: "Stefan Roesler" <sroesler_at_mail.cern.ch>
> 发送时间: 2015-09-14 21:13:13 (星期一)
> 收件人: "杨博" <b-yang12_at_mails.tsinghua.edu.cn>
> 抄送: fluka-discuss_at_fluka.org
> 主题: Re: [fluka-discuss]: A very strange simulation result by USRBDX
>
> Dear Bo yang
>
> Could you please also post the source routine (please not as rar archive
> but in ASCII format)?
>
> Running your input with the beam energy of 200MeV I get results for
> fluence and dose that are fully consistent with each other.
>
> Cheers
> Stefan
>
>
> On Sun, 13 Sep 2015, ?? wrote:
>
> >
> > Hi, every fluka user:
> >
> > Recently? I simulate the process of electron with the relativstic maxwellian
> > distribution and electron temperature of 1000 keV hitting Al and PE target
> > with same thickness of 1mm and score the forward photon dose and photon
> > spectrum by USRBDX and AUXSCORE. when I check the results, I confused that
> > the dose (1.71E-4 psv/prim.+0.4%) generated by PE target is larger than that
> > (1.60E-4 psv/prim.+0.2%) genrated by Al Target, but from the photon spectrum,
> > the photon number generated by Al is more than that generated by PE in the
> > all energy range as shown in bottom figure. I think may be there is some
> > mistakes in my input file and hope anybody can give me some advices, Thank
> > you very much, the input file and orginal data was attached.
> >
> > Bo yang
> >
> >
> >
> >
> >
> > [IMAGE]
> >
> >
> >
> >
> >
> >
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Tue Sep 15 2015 - 04:34:37 CEST