--- *Lars Fredrik Fjæra* On Tue, Jan 19, 2016 at 9:42 AM, Santana, Mario <msantana_at_slac.stanford.edu> wrote: > Lars, > > If things work fine only if you set TXFLK (NPFLKA) = UBEAM, …, it may be > so because you are actually not using the source routine, and FLUKA is just > using the data of BEAMPOS card. Are you sure that you called the routine > with the SOURCE card and that you linked/compiled? > Can you add some print statement to source.f to make sure that the routine > is being used? > > -Mario > > From: <owner-fluka-discuss_at_mi.infn.it> on behalf of Lars Fredrik Fjæra < > lfj049_at_student.uib.no> > Date: Monday, January 18, 2016 at 8:35 PM > To: fluka-discuss <fluka-discuss_at_fluka.org> > Subject: [fluka-discuss]: Unable to change beam direction directly in > source.f > > Dear Fluka users > > I'm having trouble changing the beam direction using > TXFLK (NPFLKA) > TYFLK (NPFLKA) > TZFLK (NPFLKA) > in the source routine. > > If I have the source routine read the directions from BEAMPOS card in > Fluka using e,g TXFLK (NPFLKA) = UBEAM, it works perfectly. > But if I try to define TXFLK (NPFLKA) as for example -1 directly in the > routine, nothing happens. With nothing, I mean that the beam misses my > target. > > I've tried > TXFLK (NPFLKA) = -1 > TXFLK (NPFLKA) = -1.0 > TXFLK (NPFLKA) = -ONEONE > in hope that it should make any difference, but unfortunately not. I've > also tried to remove the BEAMPOS card completely in Fluka, but the same > results were achieved. > Any suggestions? > > Thank you. > > Best regards, > --- > *Lars Fredrik Fjæra* > __________________________________________________________________________ You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_infoReceived on Tue Jan 19 2016 - 13:48:03 CET
This archive was generated by hypermail 2.3.0 : Tue Jan 19 2016 - 13:48:06 CET