Dear FLUKA experts,
I need air to be at different pressures. There is an example how to set this up in the manual under the MAT-PROP card:
[cid:051fafe8-2a4e-43b5-917a-d2cdac42fee9]
Still, I need to clarify a few things:
1. why Carbon has density of graphite and not 2.000 g/cm3 as defined in table 5.3 pg.47 (same with Oxygen) while the rest of the air components have pre-defined densities? Obviously it has something to do with CO2 but what exactly?
2. If I want higher pressure (10 atm), should I only set what(1) of MAT-PROP to 10 and what(3) of MATERIAL that define AIR2 to 10 x 0.001205?
3. The density of AIR2 directly proportional to pressure because rho=PM/RT but what happens at very high pressures where ideal gas law is not accurate?
thank you,
Roman
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Apr 29 2016 - 09:13:20 CEST