Dear David:
Thank a lot for your answer. Actually, I installed python-pil.imagetk package, and nothing happened. I will install Ubuntu 18.04 on a virtual machine and try to install again, this time in order to detect the problem. I already back to Ubuntu 18.04.
When I will install the virtual machine I will let you know what's going to happen:-)
Regards Jilberto
> On May 22, 2018, at 3:21 PM, Dávid HORVÁTH <davhorv112_at_gmail.com> wrote:
>
> Hi Jilberto!
>
> I installed flair + geoviewer on a clean Ubuntu 18.04 image using apt-get.
>
> sudo apt-get install <path-to-downloaded-package>/flair_2.3-0_all.deb
> sudo apt-get install
> <path-to-downloaded-package>/flair-geoviewer_2.3-0_amd64.deb
>
> It pulled correctly the dependencies.
>
> From the list it seems you were missing the python-pil.imagetk package.
>
> I hope this solves your problem.
>
> Cheers,
> David
>
> On Tue, May 22, 2018 at 6:51 PM jilberto Zamora Saa <jzamorasaa_at_jinr.ru>
> wrote:
>
>> Dear Andrea:
>
>> I could not install python-imaging on ubuntu 18.04, therefore, I back to
> 16.04 and everything is working fine now.
>
>> Thank a lot
>
>> Regards Jilberto
>
>>> On May 22, 2018, at 1:13 AM, Andrea Fontana <andrea.fontana_at_pv.infn.it>
> wrote:
>>>
>>> Hi Jilberto,
>>> it seems you miss python-imaging-tk. Please, also make sure you have
>>> tk-dev and python-dev.
>>>
>>> Hope this helps,
>>> Andrea
>>>
>>> Il 21/05/2018 22:55, Jilberto Antonio Zamora Saá ha scritto:
>>>> Dear Andrea:
>>>>
>>>> I have installed:
>>>>
>>>> jilberto_at_sirjazs:~$ python
>>>> python python2 python2.7 python3 python3.6 python3.6m
> python3m
>>>>
>>>> however, the default setted version is:
>>>>
>>>> jilberto_at_sirjazs:~$ python --version
>>>> Python 2.7.15rc1
>>>>
>>>> However, when I tried to install python-imaging I got the next message:
>>>>
>>>> jilberto_at_sirjazs:~$ sudo apt-get install python-imaging
>>>> Reading package lists... Done
>>>> Building dependency tree
>>>> Reading state information... Done
>>>> Package python-imaging is not available, but is referred to by another
> package.
>>>> This may mean that the package is missing, has been obsoleted, or
>>>> is only available from another source
>>>> However the following packages replace it:
>>>> python-pil:i386 python-pil
>>>>
>>>> E: Package 'python-imaging' has no installation candidate
>>>>
>>>> I read that python-pil is the equivalen for python-imaging, however,
> nothing change...
>>>>
>>>> regards Jilberto
>>>>
>>>>
>>>> ---
>>>> *******************************************************************
>>>> Dr. Jilberto Zamora Saa
>>>> Dzhelepov Laboratory of Nuclear Problems
>>>> Joint Institute for Nuclear Research
>>>> 141980 Dubna, Moscow region, Russia
>>>> phone: +(496)2162589 (Office)
>>>> phone: +7(915)4671294 (Mobile)
>>>> email: jzamorasaa_at_jinr.ru
>>>>
>>>> ********************************************************************
>>>>
>>>> El 21-05-2018 3:01 pm, Andrea Fontana escribió:
>>>>> Hi Jilberto,
>>>>> do you also have python3, alongside with python 2.7?
>>>>> Perhaps you can check if the environmental variable PATH
>>>>> is set, as in
>>>>>
>>>>> http://www.fluka.org/web_archive/earchive/new-fluka-discuss/11522.html
>>>>>
>>>>> Just an idea,
>>>>> Andrea
>>>>>
>>>>> Il 21/05/2018 19:15, Jilberto Antonio Zamora Saá ha scritto:
>>>>>> Dear Andrea:
>>>>>>
>>>>>> I have installed gcc and g++, the following versions:
>>>>>>
>>>>>> gcc (Ubuntu 7.3.0-16ubuntu3) 7.3.0
>>>>>>
>>>>>> g++ (Ubuntu 7.3.0-16ubuntu3) 7.3.0
>>>>>>
>>>>>> I also have installed the other fluka requirements, however, nothing
> change, I got the same error message.
>>>>>>
>>>>>> regards Jilberto
>>>>>>
>>>>>> ---
>>>>>> *******************************************************************
>>>>>> Dr. Jilberto Zamora Saa
>>>>>> Dzhelepov Laboratory of Nuclear Problems
>>>>>> Joint Institute for Nuclear Research
>>>>>> 141980 Dubna, Moscow region, Russia
>>>>>> phone: +(496)2162589 (Office)
>>>>>> phone: +7(915)4671294 (Mobile)
>>>>>> email: jzamorasaa_at_jinr.ru
>>>>>>
>>>>>> ********************************************************************
>>>>>>
>>>>>> El 21-05-2018 11:32 am, Andrea Fontana escribió:
>>>>>>> Hi Jilberto,
>>>>>>> strange... do you have C and C++ compilers installed on your
> Ubuntu machine?
>>>>>>> Which versions? You can verify with the commands:
>>>>>>>
>>>>>>> gcc --version
>>>>>>> g++ --version
>>>>>>>
>>>>>>> Also check the other Flair requirements at:
>>>>>>> http://www.fluka.org/flair/download.html
>>>>>>>
>>>>>>> I recommend you install all the indicated packages.
>>>>>>>
>>>>>>> Andrea
>>>>>>>
>>>>>>>
>>>>>>> Il 21/05/2018 17:24, Jilberto Antonio Zamora Saá ha scritto:
>>>>>>>> Dear Andrea:
>>>>>>>> I already try and got:
>>>>>>>>
>>>>>>>> jilberto_at_sirjazs:~/FLAIR/flair-geoviewer-2.3$ make
>>>>>>>> make -C optimizer
>>>>>>>> make[1]: Entering directory
> '/home/jilberto/FLAIR/flair-geoviewer-2.3/optimizer'
>>>>>>>> c++ -c roi.cc -m64 -DUNIX -O4 -funroll-loops -g -DNDEBUG
> -D_DEBUG=0 -DTHREAD -Wall -Wcast-align -Wcast-qual -Wextra -Wformat
> -Wpointer-arith -Wredundant-decls -Wshadow -Wno-write-strings -fwrapv
> -fstack-protector -fpic -I../utils -I../math -I../graph -I../geometry
> -I../data -fstrict-aliasing
>>>>>>>> In file included from ../data/eventbin.h:43:0,
>>>>>>>> from roi.h:19,
>>>>>>>> from roi.cc:11:
>>>>>>>> ../data/usrbin.h: In member function ‘double Usrbin::get(double,
> double, double, bool*) const’:
>>>>>>>> ../data/usrbin.h:221:9: error: ‘pow10’ was not declared in this
> scope
>>>>>>>> v = pow10(v);
>>>>>>>> ^~~~~
>>>>>>>> ../data/usrbin.h:221:9: note: suggested alternative: ‘powl’
>>>>>>>> v = pow10(v);
>>>>>>>> ^~~~~
>>>>>>>> powl
>>>>>>>> ../data/usrbin.h: In member function ‘double Usrbin::get(int,
> bool*) const’:
>>>>>>>> ../data/usrbin.h:228:9: error: ‘pow10’ was not declared in this
> scope
>>>>>>>> v = pow10(v);
>>>>>>>> ^~~~~
>>>>>>>> ../data/usrbin.h:228:9: note: suggested alternative: ‘powl’
>>>>>>>> v = pow10(v);
>>>>>>>> ^~~~~
>>>>>>>> powl
>>>>>>>> ../rules.mk:209: recipe for target 'roi.o' failed
>>>>>>>> make[1]: *** [roi.o] Error 1
>>>>>>>> make[1]: Leaving directory
> '/home/jilberto/FLAIR/flair-geoviewer-2.3/optimizer'
>>>>>>>> makefile:286: recipe for target 'optimizer/liboptimizer.a' failed
>>>>>>>> make: *** [optimizer/liboptimizer.a] Error 2
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> regards Jilberto
>>>>>>>>
>>>>>>>> ---
>>>>>>>> *******************************************************************
>>>>>>>> Dr. Jilberto Zamora Saa
>>>>>>>> Dzhelepov Laboratory of Nuclear Problems
>>>>>>>> Joint Institute for Nuclear Research
>>>>>>>> 141980 Dubna, Moscow region, Russia
>>>>>>>> phone: +(496)2162589 (Office)
>>>>>>>> phone: +7(915)4671294 (Mobile)
>>>>>>>> email: jzamorasaa_at_jinr.ru
>>>>>>>>
>>>>>>>>
> ********************************************************************
>>>>>>>>
>>>>>>>> El 21-05-2018 10:34 am, Andrea Fontana escribió:
>>>>>>>>> Dear Jilberto,
>>>>>>>>> did you try to install Flair from the tar file
>>>>>>>>> by running make and make install?
>>>>>>>>>
>>>>>>>>> Andrea
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Il 21/05/2018 15:04, Jilberto Antonio Zamora Saá ha scritto:
>>>>>>>>>> Dear FLUKA-Experts:
>>>>>>>>>>
>>>>>>>>>> I upgraded my OS to UBUNTU 18.04 and I already installed the new
> FLUKA version (the one which requires gfortran 7.3) which works fine in my
> system. However, I'm trying to install flair and when I'm going through
> flair-geoviewer I got the next problem
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> jilberto_at_sirjazs:~/FLUKA$ sudo dpkg -i
> flair-geoviewer_2.3-0_i386.deb
>>>>>>>>>> Selecting previously unselected package flair-geoviewer:i386.
>>>>>>>>>> (Reading database ... 140426 files and directories currently
> installed.)
>>>>>>>>>> Preparing to unpack flair-geoviewer_2.3-0_i386.deb ...
>>>>>>>>>> Unpacking flair-geoviewer:i386 (2.3-0) ...
>>>>>>>>>> dpkg: dependency problems prevent configuration of
> flair-geoviewer:i386:
>>>>>>>>>> flair-geoviewer:i386 depends on flair (= 2.3-0).
>>>>>>>>>> flair-geoviewer:i386 depends on python-imaging-tk.
>>>>>>>>>>
>>>>>>>>>> dpkg: error processing package flair-geoviewer:i386 (--install):
>>>>>>>>>> dependency problems - leaving unconfigured
>>>>>>>>>> Errors were encountered while processing:
>>>>>>>>>> flair-geoviewer:i386
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I already installed Python 2.7.15rc1 on my system.
>>>>>>>>>>
>>>>>>>>>> Any helps will be WELCOME!!
>>>>>>>>>>
>>>>>>>>>> regards Jilberto
>>>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>>
> __________________________________________________________________________
> You can manage unsubscription from this mailing list at
> https://www.fluka.org/fluka.php?id=acc_info
>>>>>>
>>>>
>>>
>>> --
>>> ========================================================================
>>> Dr. Andrea Fontana tel: +39 0382 987991
>>> Istituto Nazionale fax: +39 0382 423241
>>> di Fisica Nucleare
>>> Sezione di Pavia e-mail: andrea.fontana_at_pv.infn.it
>>> Via Bassi 6 web : www.pv.infn.it/~fontana
>>> 27100 PAVIA, Italy
>>> ========================================================================
>>>
>>>
> __________________________________________________________________________
>>> You can manage unsubscription from this mailing list at
> https://www.fluka.org/fluka.php?id=acc_info
>>>
>
>> __________________________________________________________________________
>> You can manage unsubscription from this mailing list at
> https://www.fluka.org/fluka.php?id¬c_info
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?idc_info
Received on Tue May 22 2018 - 22:31:22 CEST