Dear Agnieszka
Alpha decays are not included in the current FLUKA release. Sorry, if I wasn’t clear..
See for example older posts on this subject
http://www.fluka.org/web_archive/earchive/new-fluka-discuss/9245.html
Cheers
Stefan
From: Agnieszka Witkowska <witkowskaagnieszka07_at_gmail.com>
Sent: 25 July 2018 14:19
To: Stefan Roesler <Stefan.Roesler_at_cern.ch>
Cc: FLUKA discussion <fluka-discuss_at_fluka.org>
Subject: Re: [fluka-discuss]: Deposited energy with isotope source
Dear Stefan,
Can You please advise how to activate alpha decays in that case?
Best regards,
Agnieszka
2018-07-25 14:08 GMT+02:00 Stefan Roesler <Stefan.Roesler_at_cern.ch<mailto:Stefan.Roesler_at_cern.ch>>:
Dear Agnieszka
Alpha decays are not simulated and, thus, neither is the energy deposition by the alphas
Cheers
Stefan
From: owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it> <owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it>> On Behalf Of Agnieszka Witkowska
Sent: 24 July 2018 22:05
To: FLUKA discussion <fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>>
Subject: Fwd: [fluka-discuss]: Deposited energy with isotope source
Dear Fluka Experts,
Can You please help me with the issue I described below?
Best regards,
Agnieszka
---------- Forwarded message ----------
From: Agnieszka Witkowska <witkowskaagnieszka07_at_gmail.com<mailto:witkowskaagnieszka07_at_gmail.com>>
Date: 2018-07-21 23:52 GMT+02:00
Subject: [fluka-discuss]: Deposited energy with isotope source
To: FLUKA discussion <fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>>
Dear Fluka Experts,
I am trying to run simple experiment with usage of four radioisotpes: Cs137, Co60, Ra226 and Am241. I am using RADDECAY card and isotope option as a beam. My target is air-filled cylinder and I am using USRBIN card with ENERGY option set up as a particle to score (I want to score deposited energy in cylinder).
My assumption was that for all isotopes I will get quite similar results of energy deposited in cylinder, however this is not what the simulation has shown. For Co60 and Cs137 I got similar results however for Am241 and Ra226 results of the simulations differ a lot.
Can You please advise what might be wrong with my input file? Probably I am missing some significant processes that take place during the simulation or I do not understand how energy deposition is scored with USRBIN. For each simulation I am setting up HI-PROPE card with adequate mass and atomic number.
Best regards,
Agnieszka
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Wed Jul 25 2018 - 16:19:18 CEST