-- Dr. Abhijit Bhattacharyya OFFICE: NUCLEAR PHYSICS DIVISION Bhabha Atomic Research Center (BARC) MUMBAI - 400 085. INDIA PHONE: +92-22-2559-2066 FAX:- +91-22-2550-5151 Residence: A/13 Deepak Anushakti Nagar MUMBAI - 400 094. INDIA PHONE: +91-22-25580930 Mobile: +91-98201-49770 Jean-Emmanuel Groetz wrote: > David and Abhijit, > > When several gfortran compilers are present on the same workstation, > you have to define the new links to the gcc, gfortran and cpp versions. > On Ubuntu, this should be done with the following commands: > sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc- > #version 10. > sudo update-alternatives --install /usr/bin/gfortran gfortran > /usr/bin/gfortran-#version 20. > sudo update-alternatives --install /usr/bin/cpp cpp /usr/bin/cpp- > #version 30. > where gfortran-#version could be gfortran-7 for the version 7.3.0 > > Jean-Emmanuel > -- > _______________________________________________ > Jean-Emmanuel Groetz > Laboratoire Chrono-Environnement UMR CNRS 6249 > Université de Franche-Comté > 16 route de Gray > 25030 Besançon Cedex > France > > mailto : jegroetz_at_univ-fcomte.fr > tel : +33 (0) 3 81 66 65 07 > fax : +33 (0) 3 81 66 65 22 > http://chrono-environnement.univ-fcomte.fr/spip.php?article1537 > _______________________________________________ > > > > > Le mardi 04 décembre 2018 à 10:58 +0000, Horváth Dávid a écrit : >> Dear Abhijit, >> >> I could install the Gfortran 7 version of FLUKA (fluka2011.2x-linux- >> gfor64bit-7.3-AA.tar.gz) on a clean Ubuntu 18.04 system without any >> problem, but when I tried to install the Gfortran 8 version of FLUKA >> (fluka2011.2x-linux-gfor64bitAA.tar.gz) with the Gfortran-7 compiler, >> I got the same error as you did. >> >> Please, try to reinstall the correct FLUKA version, in your case: >> fluka2011.2x-linux-gfor64bit-7.3-AA.tar.gz >> >> Kind regards, >> David >> >> --- >> >> Dávid Horváth >> >> Junior Researcher >> Radiation Protection >> ELI Beamlines >> >> E: david.horvath_at_eli-beams.eu >> T: +420 266 051 283 >> M: Za Radnicà 835, 25241 Dolnà Břežany, Czech Republic >> >> >> ________________________________________ >> From: Abhijit Bhattacharyya <vega_at_barc.gov.in> >> Sent: 04 December 2018 09:29:16 >> To: Horváth Dávid >> Cc: fluka-discuss_at_fluka.org; owner-fluka-discuss_at_mi.infn.it >> Subject: Re: [fluka-discuss]: New Fluka issue in ubuntu 18.04 >> >> Dear david, >> >> Thanks for the response. >> >> In the first email, I mentioned version details which I am pasting >> here >> again. >> >> (a) linux kernel: 4.19.6-041906-generic (x86_64), >> (b) gcc version: 7.3.0-27ubuntu1~18.04 >> (c) gfortran version: 7.3.0-27ubuntu1~18.04 >> (d) GNU ld version: 2.30 >> >> Any clue? >> Best >> Abhijit >> >> On 04/12/2018 12:37, Horváth Dávid wrote: >> > Dear Abhijit, >> > >> > could you check the version of the default gfortran compiler on >> > your >> > machine with "gfortran --version"? Maybe you have multiple gfortran >> > versions installed at the same time. >> > >> > If it isn't gfortran 7, then you need to install the corresponding >> > FLUKA version. >> > >> > The "/home/alfredo/..." in backtrace is normal for FLUKA, since it >> > comes precompiled. >> > >> > Kind regards, >> > David >> > >> > --- >> > >> > Dávid Horváth >> > >> > Junior Researcher >> > Radiation Protection >> > ELI Beamlines >> > >> > E: david.horvath_at_eli-beams.eu >> > T: +420 266 051 283 >> > M: Za Radnicà 835, 25241 Dolnà Břežany, Czech Republic >> > >> > >> > ________________________________________ >> > From: Abhijit Bhattacharyya <vega_at_barc.gov.in> >> > Sent: 04 December 2018 05:10:01 >> > To: Horváth Dávid >> > Cc: fluka-discuss_at_fluka.org >> > Subject: Re: [fluka-discuss]: New Fluka issue in ubuntu 18.04 >> > >> > Dear David, >> > >> > Yes, I installed fluka2011.2x-linux-gfor64bit-7.3-AA.tar.gz >> > package. >> > >> > The backtrace part is peculiar to me. >> > >> > Best >> > Abhijit >> > >> > >> > On 03/12/2018 12:44, Horváth Dávid wrote: >> > > Dear Abhijit, >> > > >> > > the error message suggests that, you tried to install a FLUKA >> > > version >> > > not compatible with your compiler. Please check if you tried to >> > > install the fluka2011.2x-linux-gfor64bit-7.3-AA.tar.gz package. >> > > >> > > Kind regards, >> > > Dávid Horváth >> > > >> > > Junior Researcher >> > > Radiation Protection >> > > ELI Beamlines >> > > >> > > E: david.horvath_at_eli-beams.eu >> > > T: +420 266 051 283 >> > > M: Za Radnicà 835, 25241 Dolnà Břežany, Czech Republic >> > > >> > > >> > > ________________________________________ >> > > From: owner-fluka-discuss_at_mi.infn.it < >> > > owner-fluka-discuss_at_mi.infn.it> >> > > on behalf of Dr. Abhijit Bhattacharyya <vega_at_barc.gov.in> >> > > Sent: 03 December 2018 06:07:08 >> > > To: fluka-discuss_at_fluka.org >> > > Subject: [fluka-discuss]: New Fluka issue in ubuntu 18.04 >> > > >> > > Hello! >> > > >> > > I installed recently new FLUKA2011.2x followed by flair and >> > > flair >> > > geomviewer in Ubuntu >> > > OS 18.04 LTS while I find some issues. >> > > >> > > First I would like to configuration in my laptop: >> > > (a) linux kernel: 4.19.6-041906-generic (x86_64), >> > > (b) gcc version: 7.3.0-27ubuntu1~18.04 >> > > (c) gfortran version: 7.3.0-27ubuntu1~18.04 >> > > (d) GNU ld version: 2.30 >> > > >> > > I defined FLUFOR and FLUPRO as described. >> > > >> > > I faced that my input was not running and then I tried to run >> > > exfixed.inp as provided in >> > > fluka distribution as suggested by one of my friend. >> > > >> > > I see "timed out" in run status in flair. So I tried to run using >> > > "rfluka -M 1 >> > > exfixed.inp" directly from command prompt. I see that >> > > "fluka_6423" >> > > subdirectory is >> > > formed which contains manyfiles. Here fort.11 points to >> > > exfixed001.out >> > > file which was >> > > not created. >> > > >> > > The peculiar part is that "fluka_6423/exfixed001.log" contains >> > > following: >> > > >> > > vega_at_aditya:~/test$ cat fluka_6423/exfixed001.log >> > > Fortran runtime error: Incorrect extent in VALUE argument to >> > > DATE_AND_TIME intrinsic: is >> > > -140202614629398, should be >=8 >> > > >> > > Error termination. Backtrace: >> > > #0 0x7f8376ac12da in ??? >> > > #1 0x7f8376ac1ec5 in ??? >> > > #2 0x7f8376ac21b7 in ??? >> > > #3 0x7f8376c50fc2 in ??? >> > > #4 0x564af9cca0db in datimf_ >> > > at /home/alfredo/fluprogfor/linuxmvax/datimf.f:55 >> > > #5 0x564af9c16464 in flukam_ >> > > at /home/alfredo/fluprogfor/mainmvax/flukam.f:1163 >> > > #6 0x564af9c162fb in fluka >> > > at /home/alfredo/fluprogfor/mainmvax/fluka.f:307 >> > > #7 0x564af9c162fb in main >> > > at /home/alfredo/fluprogfor/mainmvax/fluka.f:310 >> > > vega_at_aditya:~/test$ >> > > >> > > >> > > The "date-time" error and pointer to "/home/alfredo/..." are >> > > something >> > > not expected. Is >> > > there anything wrong in my installation? >> > > >> > > Please advise. >> > > Thanks and Regards >> > > Abhijit Bhattacharyya >> > > >> > > -- >> > > Dr. Abhijit Bhattacharyya >> > > OFFICE: >> > > NUCLEAR PHYSICS DIVISION >> > > Bhabha Atomic Research Center (BARC) >> > > MUMBAI - 400 085. INDIA >> > > PHONE: +92-22-2559-2066 >> > > FAX:- +91-22-2550-5151 >> > > >> > > Residence: >> > > A/13 Deepak >> > > Anushakti Nagar >> > > MUMBAI - 400 094. INDIA >> > > PHONE: +91-22-25580930 >> > > Mobile: +91-98201-49770 >> > > >> > > >> > > >> > > _________________________________________________________________ >> > > _________ >> > > You can manage unsubscription from this mailing list at >> > > https://www.fluka.org/fluka.php?id=acc_info >> > >> > -- >> > Abhijit Bhattacharyya >> > Nuclear Physics Division >> > Bhabha Atomic Research Centre >> > Mumbai - 400 085 >> > INDIA >> > >> > ___________________________________________________________________ >> > _______ >> > You can manage unsubscription from this mailing list at >> > https://www.fluka.org/fluka.php?idŹc_info >> >> -- >> Abhijit Bhattacharyya >> Nuclear Physics Division >> Bhabha Atomic Research Centre >> Mumbai - 400 085 >> INDIA >> >> >> _____________________________________________________________________ >> _____ >> You can manage unsubscription from this mailing list at >> https://www.fluka.org/fluka.php?id=acc_info >> > > __________________________________________________________________________ You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_infoReceived on Tue Dec 04 2018 - 20:36:59 CET
This archive was generated by hypermail 2.3.0 : Tue Dec 04 2018 - 20:37:02 CET