Re: [fluka-discuss]: Conversion from Trial version to Full version of FLUKA

From: Glenn Rosenthal <glenn.rosenthal_at_nusano.com>
Date: Sun, 23 Jun 2019 08:56:20 -0700

David,

Thanks. I will try it tonight or tomorrow and let you know.

Regards,

-Glenn

Glenn Rosenthal, PhD

Nusano INC

10940 Wilshire Blvd, Suite 150

Los Angeles, CA 90024

Office – 424-270-9600

Fax – 424-233-0910

Conference Bridge: 888-989-2544 PIN:10940150


On Sun, Jun 23, 2019 at 2:24 AM Horváth Dávid <David.Horvath_at_eli-beams.eu>
wrote:

> Dear Glenn,
>
> The trial version of FLUKA was compiled with gfortran 8. You need to
> install the gfortran-8 package and set the GFLUFOR=gfortran-8 environment
> variable.
>
> Kind regards,
> Dávid Horváth
>
> Junior Researcher
> Radiation Protection
> ELI Beamlines
>
> E: david.horvath_at_eli-beams.eu
> T: +420 266 051 283
> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>
>
> ________________________________________
> From: Glenn Rosenthal <glenn.rosenthal_at_nusano.com>
> Sent: 22 June 2019 23:29:56
> To: Horváth Dávid
> Cc: paola.sala_at_mi.infn.it; fluka-discuss_at_fluka.org
> Subject: Re: [fluka-discuss]: Conversion from Trial version to Full
> version of FLUKA
>
> David,
>
> This is running on Windows 10 WSL.
>
> Any suggestions on fixing the issue with gfortan?
>
> The version I have is:
> gfortran --version
> GNU Fortran (Ubuntu 7.4.0-1ubuntu1~18.04) 7.4.0
> Copyright (C) 2017 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions. There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> Do you know what specific version of gfortran FLUKA would work with? I
> can then install that version?
>
> Thanks much,
>
> -Glenn
>
>
> Glenn Rosenthal, PhD
>
> Nusano INC
>
> 10940 Wilshire Blvd, Suite 150
>
> Los Angeles, CA 90024
>
> Office – 424-270-9600
>
> Fax – 424-233-0910
>
> Conference Bridge: 888-989-2544 PIN:10940150
>
>
> On Sat, Jun 22, 2019 at 9:21 AM Horváth Dávid <David.Horvath_at_eli-beams.eu
> <mailto:David.Horvath_at_eli-beams.eu>> wrote:
> Dear Glenn,
>
> this error message suggests that the gfortran was used to compile FLUKA is
> different than the one available on your system.
>
> Running FLUKA under Windows is easily doable.
> On Windows 10 - the Windows Subsystem for Linux (WSL) works perfectly.
> On older Windows versions a virtual machine or a docker container can be
> used.
>
> Kind regards,
> Dávid Horváth
>
> Junior Researcher
> Radiation Protection
> ELI Beamlines
>
> E: david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu>
> T: +420 266 051 283
> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>
>
> ________________________________________
> From: Glenn Rosenthal <glenn.rosenthal_at_nusano.com<mailto:
> glenn.rosenthal_at_nusano.com>>
> Sent: 22 June 2019 18:10:20
> To: Horváth Dávid
> Cc: paola.sala_at_mi.infn.it<mailto:paola.sala_at_mi.infn.it>;
> fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>
> Subject: Re: [fluka-discuss]: Conversion from Trial version to Full
> version of FLUKA
>
> David,
>
> Thanks much. That seams to be the core of the problem. I moved FLUKA
> into my home directly for now. make ran, it think correctly. Running the
> test case I got an odd error.
>
> $FLUPRO/flutil/rfluka -N0 -M5 example
> $TARGET_MACHINE = Linux
> $FLUPRO = /home/grosenthal/fluka
>
> Initial seed already existing
> Running fluka in /home/grosenthal/fluka-results/test2/fluka_1595
> ================================ Running FLUKA for cycle # 1
> =============================================
>
> It then stops. The contents of example001.log:
>
> Fortran runtime error: Incorrect extent in VALUE argument to DATE_AND_TIME
> intrinsic: is 1, should be >=8
>
> Error termination. Backtrace:
> #0 0x7f60a2e3b31a
> #1 0x7f60a2e3bec5
> #2 0x7f60a2e3c1b7
> #3 0x7f60a2fcafc2
> #4 0x7f60a3756ceb
> #5 0x7f60a3602464
> #6 0x7f60a36022fb
> #7 0x7f60a2481b96
> #8 0x7f60a3602339
> #9 0xffffffffffffffff
>
> My original Linux machine died so I am currently running Ubuntu under
> Windows for this. Is that a viable option?
>
> Thanks much for the help,
>
> -glenn
>
>
>
>
>
>
>
> Glenn Rosenthal, PhD
>
> Nusano INC
>
> 10940 Wilshire Blvd, Suite 150
>
> Los Angeles, CA 90024
>
> Office – 424-270-9600
>
> Fax – 424-233-0910
>
> Conference Bridge: 888-989-2544 PIN:10940150
>
>
> On Sat, Jun 22, 2019 at 12:29 AM Horváth Dávid <David.Horvath_at_eli-beams.eu
> <mailto:David.Horvath_at_eli-beams.eu><mailto:David.Horvath_at_eli-beams.eu
> <mailto:David.Horvath_at_eli-beams.eu>>> wrote:
> Hi Glenn,
>
> I think I figured out what is the problem.
>
> You are using 'sudo make' to compile and the root user has separate
> environment variables than your user account.
>
> To be able to compile as root, you need first get a root prompt with 'sudo
> su' then set up FLUPRO, FLUFOR and run 'make'.
>
> Kind regards,
> Dávid Horváth
>
> Junior Researcher
> Radiation Protection
> ELI Beamlines
>
> E: david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu><mailto:
> david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu>>
> T: +420 266 051 283
> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>
>
> ________________________________________
> From: Glenn Rosenthal <glenn.rosenthal_at_nusano.com<mailto:
> glenn.rosenthal_at_nusano.com><mailto:glenn.rosenthal_at_nusano.com<mailto:
> glenn.rosenthal_at_nusano.com>>>
> Sent: 22 June 2019 05:55:56
> To: Horváth Dávid
> Cc: paola.sala_at_mi.infn.it<mailto:paola.sala_at_mi.infn.it><mailto:
> paola.sala_at_mi.infn.it<mailto:paola.sala_at_mi.infn.it>>;
> fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org><mailto:
> fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>>
> Subject: Re: [fluka-discuss]: Conversion from Trial version to Full
> version of FLUKA
>
> David,
>
> These were originally set with EXPORT. I moved them into .bashrc so that
> they will be set all the time.
>
> setting with export did not change the results.
>
> Regards,
>
> -Glenn
>
>
>
> Glenn Rosenthal, PhD
>
> Nusano INC
>
> 10940 Wilshire Blvd, Suite 150
>
> Los Angeles, CA 90024
>
> Office – 424-270-9600
>
> Fax – 424-233-0910
>
> Conference Bridge: 888-989-2544 PIN:10940150
>
>
> On Fri, Jun 21, 2019 at 9:53 AM Horváth Dávid <David.Horvath_at_eli-beams.eu
> <mailto:David.Horvath_at_eli-beams.eu><mailto:David.Horvath_at_eli-beams.eu
> <mailto:David.Horvath_at_eli-beams.eu>><mailto:David.Horvath_at_eli-beams.eu
> <mailto:David.Horvath_at_eli-beams.eu><mailto:David.Horvath_at_eli-beams.eu
> <mailto:David.Horvath_at_eli-beams.eu>>>> wrote:
> Dear Glenn,
>
> instead of declare try using the export commands to set up the environment
> variables:
>
> export FLUPRO=/usr/local/fluka
> export FLUFOR=gfortran
>
> Kind regards,
> Dávid Horváth
>
> Junior Researcher
> Radiation Protection
> ELI Beamlines
>
> E: david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu><mailto:
> david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu>><mailto:
> david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu><mailto:
> david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu>>>
> T: +420 266 051 283
> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>
>
> ________________________________________
> From: owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it
> ><mailto:owner-fluka-discuss_at_mi.infn.it<mailto:
> owner-fluka-discuss_at_mi.infn.it>><mailto:owner-fluka-discuss_at_mi.infn.it
> <mailto:owner-fluka-discuss_at_mi.infn.it><mailto:
> owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it>>> <
> owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it
> ><mailto:owner-fluka-discuss_at_mi.infn.it<mailto:
> owner-fluka-discuss_at_mi.infn.it>><mailto:owner-fluka-discuss_at_mi.infn.it
> <mailto:owner-fluka-discuss_at_mi.infn.it><mailto:
> owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it>>>>
> on behalf of Glenn Rosenthal <glenn.rosenthal_at_nusano.com<mailto:
> glenn.rosenthal_at_nusano.com><mailto:glenn.rosenthal_at_nusano.com<mailto:
> glenn.rosenthal_at_nusano.com>><mailto:glenn.rosenthal_at_nusano.com<mailto:
> glenn.rosenthal_at_nusano.com><mailto:glenn.rosenthal_at_nusano.com<mailto:
> glenn.rosenthal_at_nusano.com>>>>
> Sent: 21 June 2019 18:00:22
> To: paola.sala_at_mi.infn.it<mailto:paola.sala_at_mi.infn.it><mailto:
> paola.sala_at_mi.infn.it<mailto:paola.sala_at_mi.infn.it>><mailto:
> paola.sala_at_mi.infn.it<mailto:paola.sala_at_mi.infn.it><mailto:
> paola.sala_at_mi.infn.it<mailto:paola.sala_at_mi.infn.it>>>
> Cc: fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org><mailto:
> fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>><mailto:
> fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org><mailto:
> fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>>>
> Subject: Re: [fluka-discuss]: Conversion from Trial version to Full
> version of FLUKA
>
> Paola,
>
> The versions are as follows:
> Ubuntu 18.04
> Gfortran 7.4
>
> $ export
> declare -x FLUFOR="gfortran"
> declare -x FLUPRO="/usr/local/fluka"
>
> $ sudo make
> FLUPRO=/usr/local/fluka flutil/lfluka -o flukahp -m fluka
> $FLUPRO = /usr/local/fluka
> now linking
> /usr/local/fluka
> g77
> ar x /usr/local/fluka/libflukahp.a fluka.o
> rm: cannot remove 'flukahp.map': No such file or directory
> g77 -m32 -mcpu=pentiumpro -O3 -g -fexpensive-optimizations -funroll-loops
> -fstrength-reduce -Wall -fno-automatic -fno-silent -ffortran-bounds-check
> -I/usr/local/fluka/flukapro -v -o flukahp -Xlinker -Map -Xlinker
> flukahp.map fluka.o -L/usr/local/fluka -lflukahp
> flutil/lfluka: line 157: g77: command not found
> cd flutil; FLUPRO=/usr/local/fluka make all; cd ..
> make[1]: Entering directory '/usr/local/fluka/flutil'
> gfortran -o actdline actdline.o
> /usr/bin/ld: i386 architecture of input file `actdline.o' is incompatible
> with i386:x86-64 output
> /usr/lib/gcc/x86_64-linux-gnu/7/../../../x86_64-linux-gnu/Scrt1.o: In
> function `_start':
> (.text+0x20): undefined reference to `main'
> actdline.o: In function `MAIN__':
> /usr/local/fluka/flutil/actdline.f:5: undefined reference to `f_open'
> /usr/local/fluka/flutil/actdline.f:6: undefined reference to `f_open'
> /usr/local/fluka/flutil/actdline.f:16: undefined reference to `s_wsfe'
> /usr/local/fluka/flutil/actdline.f:16: undefined reference to `do_fio'
> /usr/local/fluka/flutil/actdline.f:16: undefined reference to `e_wsfe'
> /usr/local/fluka/flutil/actdline.f:9: undefined reference to `s_rsfe'
> /usr/local/fluka/flutil/actdline.f:9: undefined reference to `do_fio'
> /usr/local/fluka/flutil/actdline.f:9: undefined reference to `e_rsfe'
> /usr/local/fluka/flutil/actdline.f:16: undefined reference to `s_wsfe'
> /usr/local/fluka/flutil/actdline.f:16: undefined reference to `do_fio'
> /usr/local/fluka/flutil/actdline.f:16: undefined reference to `e_wsfe'
> /usr/local/fluka/flutil/actdline.f:9: undefined reference to `s_rsfe'
> /usr/local/fluka/flutil/actdline.f:9: undefined reference to `do_fio'
> /usr/local/fluka/flutil/actdline.f:9: undefined reference to `e_rsfe'
> /usr/local/fluka/flutil/actdline.f:18: undefined reference to `s_wsle'
> /usr/local/fluka/flutil/actdline.f:18: undefined reference to `e_wsle'
> /usr/local/fluka/flutil/actdline.f:9: undefined reference to `s_rsfe'
> /usr/local/fluka/flutil/actdline.f:22: undefined reference to `s_stop'
> /usr/local/fluka/flutil/actdline.f:18: undefined reference to `s_wsle'
> /usr/local/fluka/flutil/actdline.f:18: undefined reference to `e_wsle'
> /usr/local/fluka/flutil/actdline.f:16: undefined reference to `s_rnge'
> actdline.o: In function `lstnbl_':
> /usr/local/fluka/flutil/actdline.f:28: undefined reference to `s_cmp'
> /usr/local/fluka/flutil/actdline.f:28: undefined reference to `s_cmp'
> /usr/local/fluka/flutil/actdline.f:28: undefined reference to `s_cmp'
> /usr/local/fluka/flutil/actdline.f:28: undefined reference to `s_cmp'
> /usr/local/fluka/flutil/actdline.f:28: undefined reference to `s_rnge'
> /usr/local/fluka/flutil/actdline.f:28: undefined reference to `s_rnge'
> collect2: error: ld returned 1 exit status
> makefile:61: recipe for target 'actdline' failed
> make[1]: *** [actdline] Error 1
> make[1]: Leaving directory '/usr/local/fluka/flutil'
>
> The make scrip appears to be trying to use g77 to compile. I actually
> found a version of g77 for Ubuntu and installed it and got a different set
> of errors. gfortran works correctly with other test programs so I don't
> think that is the problem.
>
> In the long run we will probably want to convert to a commercial licence.
> I could not find any information on how to do this on line.
>
> Let me now if anythign else would be hlepfule.
>
> Thank you,
>
> -Glenn
>
>
> Glenn Rosenthal, PhD
>
> Nusano INC
>
> 10940 Wilshire Blvd, Suite 150
>
> Los Angeles, CA 90024
>
> Office – 424-270-9600
>
> Fax – 424-233-0910
>
> Conference Bridge: 888-989-2544 PIN:10940150
>
>
> On Fri, Jun 21, 2019 at 2:28 AM Paola Sala <paola.sala_at_mi.infn.it<mailto:
> paola.sala_at_mi.infn.it><mailto:paola.sala_at_mi.infn.it<mailto:
> paola.sala_at_mi.infn.it>><mailto:paola.sala_at_mi.infn.it<mailto:
> paola.sala_at_mi.infn.it><mailto:paola.sala_at_mi.infn.it<mailto:
> paola.sala_at_mi.infn.it>>><mailto:paola.sala_at_mi.infn.it<mailto:
> paola.sala_at_mi.infn.it><mailto:paola.sala_at_mi.infn.it<mailto:
> paola.sala_at_mi.infn.it>><mailto:paola.sala_at_mi.infn.it<mailto:
> paola.sala_at_mi.infn.it><mailto:paola.sala_at_mi.infn.it<mailto:
> paola.sala_at_mi.infn.it>>>>> wrote:
> Hello
> could you, please, give a bit more information so that we can try to debug
> the problem with the trial version? There should be no difference with
> respect to the standard version, except that the trial version is only
> running under gfortran, not it in g77.
> It would be useful to know which Linux flavor you are using, and what is
> the gfortran version. Next, a silly question: did you set the relevant
> environment variables FLUPRO, FLUFOR (this one only if the directory name
> does not contain the "gfor" string).
> Finally, a screenshot of the error message can help
>
> Converting to the standard version implies acquiring a commercial license.
> In case you are interested, we can discuss this option outside the list
> thread.
> Regards
> Paola
> > Glenn Rosenthal, PhD
> >
> > Nusano INC
> >
> > 10940 Wilshire Blvd, Suite 150
> >
> > Los Angeles, CA 90024
> >
> > Office – 424-270-9600
> >
> > Fax – 424-233-0910
> >
> > Conference Bridge: 888-989-2544 PIN:10940150
> >
> > We have a trial licence for FLUKA, that should enable us to run the trial
> > version. This version has never run. MAKE fails with gfortran or g77.
> > Other user have experienced the same problem and said simply converting
> to
> > the full version solved the problem.
> >
> > Is there a process to convert to the full version?
> >
> > How would we go about this?
> >
> > Thank you,
> >
> > -Glenn
> >
>
>
> Paola Sala
> INFN Milano
> tel. Milano +39-0250317374
> tel. CERN +41-227679148
>
>


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Sun Jun 23 2019 - 19:28:19 CEST

This archive was generated by hypermail 2.3.0 : Sun Jun 23 2019 - 19:28:24 CEST