Dear EP,
Thanks for the info.!
I have seen this in the USRBIN description before, however this is not
what I am asking about! I don't even understand what is the 400 refers
to? As one can set up to 3000 bins for the number of binning per
axis/coordinate. Moreover, if you follow note #16 in the USRBIN
description (the one that you mentioned down there) you will endup with
some variable, with no numbers/values, which is impossible to change!!!
Anyways, I am still repeating my questions, in USRBIN card:
1-how one can increase the binning number for an axis/coordinate above
3000, e.g. if I have a structure with length in z- (or y- or x-) axis of
3500 cm, I cannot set NZ (or NY or NX) to 3500. It will run correctly,
but it will _not plot_ the projection on that axis, e.g. YZ, and I will
get an error message saying:
/At line 1200 of file gplevbin.f Fortran runtime error: Index '3001' of
dimension 2 of array 'vlrzta' above upper bound of 3000/
2- how one can increase the total binning number for all
axes/coordinates above 40,000,000, e.g. if I set NX= 140, NY=140 and
NZ=2500, this gives total binning number of (140*140*2500)=49,000,000.
Again, it will run correctly, but it will _not plot_ correctly and I
will get an error message saying:
/At line 1215 of file gplevbin.f Fortran runtime error: Index '40000001'
of dimension 1 of array 'gmstor' above upper bound of 40000000/
Neither of these errors are resolved when I modify the corresponding
values in the /gplevbin.f/ file, thus there should be some other way to
modify these values!
Hope that I clarified my problem!
Best regards,
Tamer
On 14.10.2019 08:16, EP wrote:
http://www.fluka.org/fluka.php?id=man_onl&sub=84
16) The maximum number of binnings that the user can define is 400. This
value can be changed by modifying the parameter MXUSBN in member USRBIN
of the flukapro library or directory and then re-compiling and linking
FLUKA.
On 14.10.2019 00:03, Tamer Tolba wrote:
> Dear all,
>
> In USRBIN, how can I change the default upper limit of the
> axis/coordinate binning value (the default value is 3000)?
>
> And the same question but for the overall upper limit of the binning
> value for the card (the default value is 40,000,000)?
>
> With my best regards,
>
> Tamer Tolba
>
> --
> Dr. Tamer Tolba
> Forschungszentrum Jülich
> Institut für Kernphysik (IKP)
> 52425 Jülich, Germany
> Tel.: +49 2461 61 6860
> Fax.: +49 2461 61 96415
>
>
>
> ------------------------------------------------------------------------------------------------
>
> ------------------------------------------------------------------------------------------------
>
> Forschungszentrum Juelich GmbH
> 52425 Juelich
> Sitz der Gesellschaft: Juelich
> Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
> Vorsitzender des Aufsichtsrats: MinDir Volker Rieke
> Geschaeftsfuehrung: Prof. Dr.-Ing. Wolfgang Marquardt (Vorsitzender),
> Karsten Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
> Prof. Dr. Sebastian M. Schmidt
> ------------------------------------------------------------------------------------------------
>
> ------------------------------------------------------------------------------------------------
>
>
>
> __________________________________________________________________________
>
> You can manage unsubscription from this mailing list at
> https://www.fluka.org/fluka.php?id=acc_info
>
--
Dr. Tamer Tolba
Forschungszentrum Jülich
Institut für Kernphysik (IKP)
52425 Jülich, Germany
Tel.: +49 2461 61 6860
Fax.: +49 2461 61 96415
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Oct 14 2019 - 15:11:18 CEST