RE: [fluka-discuss]: change binning upper value in USRBIN

From: Stefan Roesler <Stefan.Roesler_at_cern.ch>
Date: Thu, 17 Oct 2019 14:26:52 +0000

Hello

Sorry, your question is not clear. Do you refer to the limits in the scoring card (in the FLUKA input) or the limits on the axes when plotting of the result (which by default is taken from the scoring card)?

Cheers
Stefan

-----Original Message-----
From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> On Behalf Of Tamer Tolba
Sent: 14 October 2019 00:03
To: fluka-discuss <fluka-discuss_at_fluka.org>
Subject: [fluka-discuss]: change binning upper value in USRBIN

Dear all,

In USRBIN, how can I change the default upper limit of the axis/coordinate binning value (the default value is 3000)?

And the same question but for the overall upper limit of the binning value for the card (the default value is 40,000,000)?

With my best regards,

Tamer Tolba

--
Dr. Tamer Tolba
Forschungszentrum Jülich
Institut für Kernphysik (IKP)
52425 Jülich, Germany
Tel.: +49 2461 61 6860
Fax.: +49 2461 61 96415
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498 Vorsitzender des Aufsichtsrats: MinDir Volker Rieke
Geschaeftsfuehrung: Prof. Dr.-Ing. Wolfgang Marquardt (Vorsitzender), Karsten Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt, Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Oct 17 2019 - 17:33:43 CEST

This archive was generated by hypermail 2.3.0 : Thu Oct 17 2019 - 17:33:45 CEST