Hi allThe Rocco's suggestion to check the example.inp file runing is
very goodOn my Dedian I have subdir 'EXAMPLE' with example.inpAfter
checking fluka I seeamd64_at_debian:~$ cd MyWorkamd64_at_debian:~/MyWork$ cd
EXAMPLEamd64_at_debian:~/MyWork/EXAMPLE$ direxample.flair
example.inpamd64_at_debian:~/MyWork/EXAMPLE$ $FLUPRO/flutil/rfluka -N0 -M5
example$TARGET_MACHINE = Linux$FLUPRO = /home/amd64/fluka
Initial seed copied from /home/amd64/flukaRunning fluka in
/home/amd64/MyWork/EXAMPLE/fluka_2912================================
Running FLUKA for cycle # 1
=============================================Removing linksRemoving
temporary filesSaving output and random number seedSaving additional
files generated Moving fort.47 to
/home/amd64/MyWork/EXAMPLE/example001_fort.47 Moving fort.48 to
/home/amd64/MyWork/EXAMPLE/example001_fort.48 Moving fort.49 to
/home/amd64/MyWork/EXAMPLE/example001_fort.49 Moving fort.50 to
/home/amd64/MyWork/EXAMPLE/example001_fort.50 Moving fort.51 to
/home/amd64/MyWork/EXAMPLE/example001_fort.51
================================ Running FLUKA for cycle # 2
=============================================Removing linksRemoving
temporary filesSaving output and random number seedSaving additional
files generated Moving fort.47 to
/home/amd64/MyWork/EXAMPLE/example002_fort.47 Moving fort.48 to
/home/amd64/MyWork/EXAMPLE/example002_fort.48 Moving fort.49 to
/home/amd64/MyWork/EXAMPLE/example002_fort.49 Moving fort.50 to
/home/amd64/MyWork/EXAMPLE/example002_fort.50 Moving fort.51 to
/home/amd64/MyWork/EXAMPLE/example002_fort.51
================================ Running FLUKA for cycle # 3
=============================================Removing linksRemoving
temporary filesSaving output and random number seedSaving additional
files generated Moving fort.47 to
/home/amd64/MyWork/EXAMPLE/example003_fort.47 Moving fort.48 to
/home/amd64/MyWork/EXAMPLE/example003_fort.48 Moving fort.49 to
/home/amd64/MyWork/EXAMPLE/example003_fort.49 Moving fort.50 to
/home/amd64/MyWork/EXAMPLE/example003_fort.50 Moving fort.51 to
/home/amd64/MyWork/EXAMPLE/example003_fort.51
================================ Running FLUKA for cycle # 4
=============================================Removing linksRemoving
temporary filesSaving output and random number seedSaving additional
files generated Moving fort.47 to
/home/amd64/MyWork/EXAMPLE/example004_fort.47 Moving fort.48 to
/home/amd64/MyWork/EXAMPLE/example004_fort.48 Moving fort.49 to
/home/amd64/MyWork/EXAMPLE/example004_fort.49 Moving fort.50 to
/home/amd64/MyWork/EXAMPLE/example004_fort.50 Moving fort.51 to
/home/amd64/MyWork/EXAMPLE/example004_fort.51
================================ Running FLUKA for cycle # 5
=============================================Removing linksRemoving
temporary filesSaving output and random number seedSaving additional
files generated Moving fort.47 to
/home/amd64/MyWork/EXAMPLE/example005_fort.47 Moving fort.48 to
/home/amd64/MyWork/EXAMPLE/example005_fort.48 Moving fort.49 to
/home/amd64/MyWork/EXAMPLE/example005_fort.49 Moving fort.50 to
/home/amd64/MyWork/EXAMPLE/example005_fort.50 Moving fort.51 to
/home/amd64/MyWork/EXAMPLE/example005_fort.51
amd64_at_debian:~/MyWork/EXAMPLE$ Maybe before flair checking to control
run flukaGood luck
> Hi Rocco,
> I really appreciate your attempt to help me, but I have checked the
> fluka entries in the configure menu and it is still not running with
> the example.inp. Do you think there is anything else I can do?
>
> Best regards,
>
> Monia
>
> On Thu, Nov 21, 2019 at 3:33 PM rmnrcn79h30h579o <
> rmnrcn79h30h579o_at_studenti.unical.it> wrote:
> >
> >
> >
> >
> > Hi Monia,
> >
> > check if all fluka entries (ie flukahp etc) are installed in the
> > flair -->config menu.
> >
> >
> >
> >
> >
> > You could try to see if the example.inp file in the fluka directory
> > runs.
> >
> >
> >
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Rocco
> >
> >
> >
> > Nuclear Physics and Nanotecnolgy.
> >
> >
> >
> > Student in Master in Using Ionising Radiation and Radiation
> > Protection
> >
> > Dipartimento di Fisica- Unical
> >
> > Università Della Calabria
> >
> > Italia
> >
> > From: Monia Kazemeini <kazemei2_at_unlv.nevada.edu>
> >
> > Sent: Friday, November 22, 2019 12:23:44 AM
> >
> > To: rmnrcn79h30h579o <rmnrcn79h30h579o_at_studenti.unical.it>
> >
> > Cc: fluka-discuss_at_fluka.org <fluka-discuss_at_fluka.org>
> >
> > Subject: Re: [fluka-discuss]: Gfortran Error
> >
> >
> >
> > Hello Rocco,
> >
> >
> >
> > Thank you so much for your response! I have installed gfortran
> > 7.4.0 and it still gives me an error. The runs stay at 0%. Please
> > let me know if you have any other suggestions!
> >
> >
> >
> > Best regards,
> >
> >
> >
> > Monia
> >
> >
> >
> >
> > On Wed, Nov 20, 2019 at 3:58 PM rmnrcn79h30h579o <
> > rmnrcn79h30h579o_at_studenti.unical.it> wrote:
> >
> >
> > >
> > > Hi Monia,
> > >
> > >
> > >
> > >
> > >
> > > it sounds its similare this post
> > >
> > >
> > >
> > > http://www.fluka.org/web_archive/earchive/new-fluka-discuss/12169.html
> > >
> > >
> > >
> > >
> > >
> > > Please remove and reinstall correct version of fortran .. in new
> > > linux mint you can install gfortran 7.4 compatible with this
> > > version of fluka.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Let us know if the problem persists.
> > >
> > >
> > >
> > >
> > >
> > > Rocco
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Romano Rocco
> > >
> > >
> > >
> > >
> > >
> > > Nuclear Physics and Nanotecnolgy.
> > >
> > >
> > >
> > >
> > >
> > > Student in Master in Using Ionising Radiation and Radiation
> > > Protection
> > >
> > >
> > >
> > > Dipartimento di Fisica- Unical
> > >
> > >
> > >
> > > Università Della Calabria
> > >
> > >
> > >
> > > Italia
> > >
> > >
> > >
> > >
> > > From:
> > > owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it>
> > > on behalf of Monia Kazemeini <kazemei2_at_unlv.nevada.edu>
> > >
> > > Sent: Wednesday, November 20, 2019 10:52:20 PM
> > >
> > > To: fluka-discuss_at_fluka.org <fluka-discuss_at_fluka.org>
> > >
> > > Subject: [fluka-discuss]: Gfortran Error
> > >
> > >
> > >
> > > Hi Fluka Users,
> > >
> > >
> > >
> > > I have been trying to run FLUKA, however is is giving me an error
> > > message: Fortran runtime error: Incorrect extent in VALUE
> > > argument to DATE_AND_TIME intrinsic: is -2, should be >=8.
> > >
> > >
> > >
> > > I have tried Gfortran 7,8, and 9. All the versions give me the
> > > same error. In addition, I have tried reinstalling three times as
> > > well. At this point, I am totally stuck. I am running
> > > fluka2011.2x-linux-gfor64bitAA.tar.gz on Ubuntu. If someone could
> > > point
> > > me in the right direction, I would appreciate it!
> > >
> > >
> > >
> > > Best regards,
> > >
> > >
> > >
> > > Monia
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> > --
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Monia Kazemeini
> > PhD Candidate
> > Department of Mechanical Engineering
> > University of Nevada, Las Vegas
> > 4505 S. Maryland Pkwy
> > Las Vegas, NV 89154
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Nov 22 2019 - 09:25:31 CET