Re: [fluka-discuss]: linking the RQMD and DPMJET libraries, and using them in flair

From: Santana, Mario <msantana_at_slac.stanford.edu>
Date: Thu, 19 Mar 2020 18:47:15 +0000

Actually, what Obed encounters is an error even though he has linked RQMD and DPMJET.
This did not use to be the case in previous versions (there was just a warning message).
In any case, this should be solved by adding a PHYSICS card with IONSPLIT.

Se also this thread:
http://www.fluka.org/web_archive/earchive/new-fluka-discuss/13621.html

-M
________________________________
From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> on behalf of Answers <answers_at_pcfluka.mi.infn.it>
Sent: Thursday, March 19, 2020 9:44 AM
To: Obed <obed_at_tlabs.ac.za>
Cc: Fluka Discuss <fluka-discuss_at_fluka.org>
Subject: Re: [fluka-discuss]: linking the RQMD and DPMJET libraries, and using them in flair

Dear Obed,

in the terminal the procedure is the following one:

1. To Build the executable, type:
$FLUPRO/flutil/ldpmqmd -o executable_name

2. To Run, type:
$FLUPRO/flutil/rfluka -N0 -M1 -e executable_name input_name

where N is the first cycle number, M is the last cycle numer, and the
input_name should be without .inp


In flair:

1. Press the ¡Compile¢ button at the up right corner
2. Set ' ldpmqmd ' under the Link category.
3. Give a name to your executable file in the empty bar following
¢Executable:¢
4. Press the 'Build' buttom

You can then run your simulation as usual. FLUKA will use the RQMD and
DPMJET models.

For an extra example with images, please take a look here:

http://www.fluka.org/web_archive/earchive/new-fluka-discuss/9784.html

Best regards



On Thu, 19 Mar 2020, Obed wrote:

> Dear fluka experts
>
> I need to run simulation with a proton beam of 200 MeV energy. When I run the
> simulation I get the following warning:
>
> "Coalescence activated and beam above BME limit, products badly treated
> with IONSPLIT link, rQMD!"
>
> I have already linked RQMD and DMMJET libraries and produced the executable
> files inside fluka directory while installing fluka on my computer. How do I
> use them in flair? I am using ubuntu operating system.
>
> Thanks in advance,
> Obed
>
> --
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> iThemba LABS
> Old Faure Road
> Faure
> P. O. Box 722
> Somerset West, 7129
> South Africa
> www.tlabs.ac.za<http://www.tlabs.ac.za>
>
> Dr Obed Shirinda
> Computational Physicist: Instrumentation and Information Technology
> Department
> Office no: J-bolck, J158
> Tel: +27 (0) 21 843 1547
> Fax: +27 (0) 21 843 3525
> Cell: +27 (0) 72 056 4314/ +27 (0) 78 253 6798
> email: obed_at_tlabs.ac.za
> Alternative email: obedshirinda_at_yahoo.co.uk
> obedshirinda_at_gmail.com
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> __________________________________________________________________________
> You can manage unsubscription from this mailing list at
> https://www.fluka.org/fluka.php?id=acc_info
>


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Mar 19 2020 - 21:32:07 CET

This archive was generated by hypermail 2.3.0 : Thu Mar 19 2020 - 23:32:42 CET