[fluka-discuss]: Fw: Bragg_Peak

From: 李立华 <13691416247_at_ciae.ac.cn>
Date: Tue, 19 May 2020 17:12:24 +0800 (GMT+08:00)

Dear Fluka experts:

     I use Fluka2020 to simulate Bragg Peak as the case "page 29"in the fluka course "AdvancedSources2012.pdf",

with "Mcs on" "Fluc on" "Nuc on" seems not work well, all the results are exactly same,but in the fluka course

the results different with each other, why?

with best regards!


-----原始邮件-----
发件人:"李立华" <13691416247_at_ciae.ac.cn>
发送时间:2020-05-16 17:34:18 (星期六)
收件人: fluka_collaboration <fluka-discuss_at_fluka.org>
抄送:
主题: Bragg_Peak



Dear Fluka experts:

     I use Fluka2020 to simulate Bragg Peak,the case is same as fluka course showed in the figure below

but my simulation results is exactly same whatever "Mcs" "Fluc" "Nuc" switch on or off, the input file and result file

are in the mail attachment enclosure,my simulation results is in the figure below:

why "Mcs" "Fluc" "Nuc" switch on do not works?

with best regards!

 







请注意:在您阅读本邮件时,如您了解本邮件内容涉及商业秘密,请您遵守与发信人的商务约定,保守商业机密。如您发现本邮件内容涉及重要商业秘密或与国家秘密相关,请您即刻联系发信人,确认邮件内容是否适于通过互联网传递。






__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

Bragg_Peak.PNG
(image/png attachment: Bragg_Peak.PNG)

Document.PNG
(image/png attachment: Document.PNG)

Received on Tue May 19 2020 - 13:55:40 CEST

This archive was generated by hypermail 2.3.0 : Tue May 19 2020 - 13:55:43 CEST