Thank you for the information,
I was able to resolve the issue and hope this helps others facing similar
issues
On Mon, Jan 18, 2021 at 1:24 PM Stefan E. Mueller <stefan.mueller_at_hzdr.de>
wrote:
> Dear Samson Omondi,
>
> it looks to me as if the program "gplevbin" is not found. This usually is
> in the directory $FLUPRO/flutil/
>
> In your case, it is supposed to be found in
>
> /usr/local/fluka/bin/bingplevbin
>
> which at least is missing a "/" between "bin" and "gplevbin" (the program
> to be executed is called "gplevbin"). Make sure that the path for the
> gplevbin executable is correct - in FLAIR this can be set in the "FLAIR"
> tab by clicking on the "Config" icon and in the window which opens
> selecting the "programs" menu. At this point you can specify the path where
> the "gplevbin projection" program resides. See section F6.1 of the
> fluka/flair manual (which can usually conveniently be reached by clicking
> the blue "i" ball on the upper right corner of FLAIR).
>
> Stefan
>
> --
> Stefan E. Mueller
> Department of Information Services and Computing - Computational Science
> and Institute of Radiation Physics
> Helmholtz-Zentrum Dresden-Rossendorf
> Tel: +49 (0351) 260 3847
> Stefan.Mueller_at_hzdr.de
> http://www.hzdr.de
>
> Vorstand: Prof. Dr. Sebastian M. Schmidt, Dr. Diana Stiller
> Vereinsregister: VR 1693 beim Amtsgericht Dresden
>
> On Mon, 4 Jan 2021, Samson Omondi wrote:
>
> Dear Fluka experts
> Kindly help me resolve this issue as soon as possible as stated in the
> reference above.
> The USRBIN plots are not generated when prompted during plots.
> Thanks
> The error return message is given below.
>
> started 2021.01.04 18:28:00
> gnuplot> reset
> gnuplot> set terminal wxt 0 enhanced title 'chest phantom imaging-0:
> USRBIN chest phantom imaging 21'
> gnuplot> set title 'USRBIN chest phantom imaging 21'
> gnuplot> unset grid
> gnuplot> set xlabel ''
> gnuplot> set xtics
> gnuplot> set ylabel ''
> gnuplot> set ytics
> gnuplot> set cblabel ''
> gnuplot> set cbtics
> gnuplot> unset logscale x
> gnuplot> unset logscale y
> gnuplot> unset logscale z
> gnuplot> set logscale cb
> gnuplot> unset logscale x2
> gnuplot> unset logscale y2
> gnuplot> set key default
> gnuplot> plotname='chest phantom imaging_21_plot'
>
> Cmd: /usr/local/fluka/bin/bingplevbin
> <<< -
> <<<
> <<< /home/sam/flair wo/x_ray work/chest phantom imaging_21.bnn
> <<<
> <<<
> <<< 1
> <<<
> <<< 60
> <<<
> <<< 60
> <<<
> <<< 1
> <<<
> Cannot execute command: /usr/local/fluka/bin/bingplevbin
> Return code 1
> >e> ERROR: File gplevh.dat is not created.
--
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Jan 21 2021 - 14:06:00 CET