Hello
the messages during compilation look innocent.
About your input:
I would suggest to use the COMBNAME option for the geometry, it is much
more easy to use.
Also, my personal preference goes to a fixed format for the rest of the
input, unless one has to input values with a large number of significant
decimals, exceeding the 10 digit field.
Anyhow:
-In the BEAMPOS card there is a spurious ' ' field at the end. In free
format,
character strings - keywords and SDUMs - must NOT be put between
quotes. Just leave the field empty for an empty SDUM
- In the GEOBEGIN card all what's are missing, I mean that in free format
Zero values must be given explicitly or as empty places between two
non-blank separators. As it is in your input, the COMBINAT string is
taken as if it was the value of what(1)
- GEOBEGIN must be followed by the geometry title card, in fixed format
since you asked for it (see the manual, in the combinatorial geometry
section)
- USRBDX : if logaritmic, the minimum value cannot be zero
- USRBDX : Flair gives one more error message, that should be more of a
warning: the "zero" value for maximum angle is indeed understood by
FLUKA that sets 2pi or 4pi by default . Flair instead thinks that the
max is not set
Hope this helps
Paola
On 6/12/21 4:01 PM, Phillip Pare wrote:
> Dear Experts
>
> As a newcomer to FLUKA and Flair I tried to do two things:
> Firstly I compiled the code using gfortran. This produced the errors
> and warnings in the attached filed. I am not sure if these errors are
> significant as the code still seemed to run in a fashion.
>
> Secondly I tried to duplicate the pion fluence example in section
> 2.2.13 of the manual.
> ( http://www.fluka.org/content/manuals/online/2.3.13.html
> <http://www.fluka.org/content/manuals/online/2.3.13.html> )
> I used the number based free format in the attached example.inp file.
> I first tried to run it from the command line and the example001.out
> file, which I have attached, was produced.
> I then tried to load it using Flair which generated the following
> Ouput warnings and errors which are included below. As I am still
> learning the code, I was not able to correct the warnings and errors.
>
> Any help and advice with regard to the gfortran installation and
> in getting this example to work would be much appreciated.
>
> Kind regards
>
> Phillip Pare
>
> Started 2021.06.12 15:58:32
> WARNING: Invalid what(s)=[1]
> *
> ..+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> GEOBEGIN COMBINAT
> 0 0 A simple Be target inside vacuum
> WARNING: Invalid what(s)=[8, 10, 11, 'Assertion failed: w(10)>w(11)']
> * Boundary crossing fluence in the middle of the target (log
> intervals, one-way)
> USRBDX 99. 209. -47. 3. 4. 400.piFluenUD
> USRBDX 50. 0.0 50. 0.0 0.0 10. &
> WARNING: Invalid what(s)=[8, 10, 11, 'Assertion failed: w(10)>w(11)']
> * Boundary crossing current in the middle of the target (log
> intervals, one-way)
> USRBDX -1. 209. -47. 3. 4. 400.piCurrUD
> USRBDX 50. 0.0 50. 0.0 0.0 10. &
>
> COMBINAT do not exist
> *
> ..+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> GEOBEGIN COMBINAT
> 0 0 A simple Be target inside vacuum
>
>
> Phillip Pare
>
> S.E.
>
> *Tel: *+27-12-305-5219
>
> *Fax: *+27-86-625-5462
>
> *Cell: *+27-72-397-8356
>
> *Email: phillip.pare_at_necsa.co.za <phillip.pare_at_necsa.co.za>*
>
> *Website: **www.necsa.co.za* <http://www.necsa.co.za>
>
>
> <http://>
>
> Facebook <https://web.facebook.com/necsasoc/> Twitter
> <https://twitter.com/necsa_Ltd> LinkedIn
> <https://www.linkedin.com/company/necsa/>
>
> ------------------------------------------------------------------------
>
> This message contains confidential information and is intended only
> for the individual named. If you are not the named addressee you
> should not disseminate, distribute or copy this e-mail. Please notify
> the sender immediately by e-mail if you have received this e-mail by
> mistake and delete this e-mail from your system. E-mail transmission
> cannot be guaranteed to be secure or error-free as information could
> be intercepted, corrupted, lost, destroyed, arrive late or incomplete,
> or contain viruses. The sender therefore does not accept liability for
> any errors or omissions in the contents of this message, which arise
> as a result of e-mail transmission. If verification is required please
> request a hard-copy version from NECSA.
>
> ------------------------------------------------------------------------
>
> Scanned by *MailMarshal* - Trustwave's comprehensive email content
> security solution. Download a free evaluation of MailMarshal at
> www.trustwave.com <http://www.trustwave.com>
>
> **
> ------------------------------------------------------------------------
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Jun 17 2021 - 12:06:32 CEST