Re: 245Cm

=2E0908281205010.21959_at_rp-fluka.slac.stanford.edu> <f5e18f813ef41.4a9906d7@=
studenti.unimi.it>
User-Agent: Alpine 1.10 (LRH 962 2008-03-14)
MIME-Version: 1.0
Content-Type: MULTIPART/MIXED; BOUNDARY=3D"1334196566-1754712322-1251563981=
=3D:22746"
X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.0 (smtp=
1.mi.infn.it [192.84.138.69]); Sat, 29 Aug 2009 18:39:45 +0200 (CEST)
Sender: owner-fluka-discuss_at_mi.infn.it

  This message is in MIME format. The first part should be readable text,
  while the remaining parts are likely unreadable without MIME-aware tools.

--1334196566-1754712322-1251563981=3D:22746
Content-Type: TEXT/PLAIN; charset=3DISO-8859-15; format=3Dflowed
Content-Transfer-Encoding: 8BIT

Dear Francesca,

in your previous email you asked just
"is it possible defining 245Cm as a material in FLUKA (EM-CASCA
default)?". You did not attach your input file.
I tried it on the example input which is distributed with FLUKA,
replacing the beam particle with ELECTRON and the BERYLLIU material
with 245Cm, and it worked. So, it is not a question of material.
If your run is aborted, it must be for some other cause, but we
don't have any information. Please send your input file, log file,
*.out file and source file (if any).

Regards,

Alberto

On Sat, 29 Aug 2009, francesca belloni wrote:

> Dear Alberto,
> =A0=A0=A0=A0=A0=A0=A0=A0=A0 thank you for your answer.
> I generated fission fragments (HEAVY-ION card) inside different targets
> (235U, 233U, 241Am...) in order to score energy deposition in a gas
> located in front of the target. I usually used the ICARUS default.
> =A0=A0=A0=A0=A0=A0=A0=A0 Then I tried with 245CM in the EM-CASCA default =
(adding
> DELTA-RAY,FLUKA-FIX, EVENTYPE,... cards in order to report it to the
> ICARUS default, but skipping LOW-NEUT), but the run gets aborted.
> =A0=A0=A0=A0=A0=A0=A0 Is there a way to reproduce FFs exiting from a 245C=
m
> target,please?
>=20
> Thank you,
> best regards,
> Francesca Belloni
>=20
>=20
> ----- Messaggio Originale -----
> Da: Alberto Fasso' <fasso_at_slac.stanford.edu>
> Data: Venerdi', Agosto 28, 2009 9:10 pm
> Oggetto: Re: 245Cm
> A: fluka-discuss_at_fluka.org
> Cc: francesca belloni <francesca.belloni2_at_studenti.unimi.it>
>=20
> > Cara Francesca,
> >
> > yes, with EM-CASCA it is possible. Just define the material:
> > MATERIAL=A0=A0=A0=A0=A0=A0=A0
> > 96.0=A0=A0=A0 245.00=A0=A0=A0=A0=A0
> > 13.5=A0=A0=A0=A0=A0=A0 0.0=A0=A0=A0=A0=A0=A0 0.0=A0=A0=A0=A0=A0 0.0 CM2=
45
> >
> > With other DEFAULTS, you should be more careful, since there is no
> > low-energy neutron cross section available. But pure electron-photon
> > interactions can be simulated up to Z=3D100.
> >
> > Alberto
> >
> >
> >
> > On Thu, 27 Aug 2009, francesca belloni wrote:
> >
> > > Dear all
> > >
> > > is it possible defining 245Cm as a material in FLUKA (EM-CASCA
> > default)> please
> > >
> > > Thank you
> > >
> > > best regards
> > >
> > > Francesca Belloni
> > >
> > >
> >
> > --
> > Alberto Fasso`
> > SLAC-RP, MS 48, 2575 Sand Hill Road, Menlo Park CA 94025
> > Phone: (1 650) 926 4762=A0=A0 Fax: (1 650) 926 3569
> > fasso_at_slac.stanford.edu
> >
>

--=20
Alberto Fasso`
SLAC-RP, MS 48, 2575 Sand Hill Road, Menlo Park CA 94025
Phone: (1 650) 926 4762 Fax: (1 650) 926 3569
fasso_at_slac.stanford.edu
--1334196566-1754712322-1251563981=3D:22746--
Received on Sun Aug 30 2009 - 11:13:56 CEST