Geometry Debug Error in parse.f

Dear FLUKA experts

I tried to debug my geometry using FLAIR, but after a few seconds I get
an error. I did not find an error in my input and I used SimpleGeo for
debugging too. SimpleGeo did not find any suspicious points at all.

I'm using version:

$cat Version.tag
The latest version is: 2011.2.4
respin: July 3rd 2011
Fluka2011.2 (March 2011) released on: March 25th 2011

on an x86_64 Intel machine with gfortran.

The debugging process in FLAIR gives me the following status:

Errors found RC=33536

The logfile gives:

At line 6 of file parse.f
Fortran runtime error: Actual string length is shorter than the declared
one for dummy argument 'txline' (80/132)

Backtrace for this error:
  + function parse_ (0x41914F)
    at line 55 of file parse.f
  + function geoskp_ (0x4D1A66)
    at line 204 of file geoskp.f
  + function flukam_ (0x40C570)
    at line 1328 of file flukam.f
  + function fluka (0x4081AC)
    at line 289 of file fluka.f
  + /lib64/libc.so.6(__libc_start_main+0xfd) [0x7f4af1a33cdd]
y
  only be granted in writing. This software results in
  particular from work performed by Alberto Fassò, Alfredo
  Ferrari, Johannes Ranft, Paola Sala (the "Authors"), and
  their collaborators (the "Collaborators"). INFN and CERN are
  the exclusive source of distribution of the code, bug fixes
  and documentation of the FLUKA software (FLUKA website), and
  may authorise distribution by mirror sites. This license
  cancels and replaces any prior license conditions but their
  warranty and liability provisions shall continue to apply to
  any use or modifications made under such prior license
  conditions.

So I don't know, if this error is because of my input or installation,
or it is an issue of the debugger. I attached my input.

Thank you very much for any inputs!

Roger

    0 0 Rectangular phantom (30x30x15 cm^3) at zero with SSD75
*
* Bodies
* ------
*
* General definitions:
* blackhole to include geometry
SPH BLK 0.0 0.0 0.0 10000.0
* void
RPP VAC -1000.0 1000.0 -1000.0 1000.0 -1000.0 1000.0
* Treatment room air
RPP ROOM -100.0 100.0 -100.0 100.0 -100.0 100.0
* Body for phantom
RPP PHANTOM -15.0 15.0 -15.0 15.0 0.0 15.0
RPP PMMA -14.0 14.0 -14.0 14.0 0.25 14.0
* Scoring volumes
RPP SCOR1 -0.5 0.5 -0.5 0.5 0.05 0.15
RPP SCOR2 -0.5 0.5 -0.5 0.5 0.95 1.05
RPP SCOR3 -0.5 0.5 -0.5 0.5 1.95 2.05
RPP SCOR4 -0.5 0.5 -0.5 0.5 2.95 3.05
RPP SCOR5 -0.5 0.5 -0.5 0.5 3.95 4.05
RPP SCOR6 -0.5 0.5 -0.5 0.5 4.95 5.05
RPP SCOR7 -0.5 0.5 -0.5 0.5 5.95 6.05
RPP SCOR8 -0.5 0.5 -0.5 0.5 6.95 7.05
RPP SCOR9 -0.5 0.5 -0.5 0.5 7.95 8.05
RPP SCOR10 -0.5 0.5 -0.5 0.5 8.95 9.05
RPP SCOR11 -0.5 0.5 -0.5 0.5 9.95 10.05
RPP SCOR12 -0.5 0.5 -0.5 0.5 10.95 11.05
RPP SCOR13 -0.5 0.5 -0.5 0.5 11.95 12.05
RPP SCOR14 -0.5 0.5 -0.5 0.5 12.95 13.05
RPP SCOR15 -0.5 0.5 -0.5 0.5 14.85 14.95
END
*
* Regions
* -------
*
* Blackhole
BLKHOLE 5 +BLK -VAC
* Vacuum outside treatment room
VACUUM 5 +VAC -ROOM
* Air around target
AIR 5 +ROOM -PHANTOM
PWALL 5 +PHANTOM -PMMA -SCOR1 -SCOR15
* Water phantom
WPHAN 5 +PMMA -SCOR2 -SCOR3 -SCOR4 -SCOR5 -SCOR6 -SCOR7 -SCOR8
-SCOR9 -SCOR10 -SCOR11 -SCOR12 -SCOR13 -SCOR14
* Scoring volumes
VSCOR1 5 +SCOR1
VSCOR2 5 +SCOR2
VSCOR3 5 +SCOR3
VSCOR4 5 +SCOR4
VSCOR5 5 +SCOR5
VSCOR6 5 +SCOR6
VSCOR7 5 +SCOR7
VSCOR8 5 +SCOR8
VSCOR9 5 +SCOR9
VSCOR10 5 +SCOR10
VSCOR11 5 +SCOR11
VSCOR12 5 +SCOR12
VSCOR13 5 +SCOR13
VSCOR14 5 +SCOR14
VSCOR15 5 +SCOR15
END