RE: convert MCNP geometry to FLUKA

Hi Lewis,
Thanks for the reply. I may not so clearly describe about the
conversion. What I really mean is the way around: I have a MCNP geometry
file, and want to convert it to a FLUKA geometry file so that I can use
FLUKA to do simulation.

Thanks,
Zhiyi.

On Wed, 2011-12-21 at 17:10 +0000, Macfarlane, Lewis wrote:
> Dear Zhiyi,
>
> You can export FLUKA input to MCNP geometry using FLAIR. File =>
> Export => MCNP. You can then choose to either export to Macrobodies or
> otherwise. Note that in the MCNP input file you will need to add the
> final cell for the outside world as the FLIAR conversion won't do this
> for you.
>
> Best regards,
> Lewis.
>
> -----Original Message-----
> From: owner-fluka-discuss_at_mi.infn.it [mailto:owner-fluka-discuss_at_mi.infn.it] On Behalf Of Zhiyi Liu
> Sent: 21 December 2011 16:13
> To: FLUKA discussion
> Subject: convert MCNP geometry to FLUKA
>
> Hello FLUKAers:
> I am curious if anybody successfully and directly converted MCNP's
> geometry file to FLUKA's? I spent a lot of time to look after via
> internet, unfortunately, no good luck.
>
> Thank you,
> Zhiyi.
>
>
Received on Wed Dec 21 2011 - 23:15:11 CET