RE: FLUKA installation

No problem. Cheers to Vasilis for the guidance, as someone had a similar problem here on 19 May 2011.

http://www.fluka.org/web_archive/earchive/new-fluka-discuss/3773.html

-Andy

-----Original Message-----
From: Leila Ounalli [mailto:leila.ounalli_at_cnstn.rnrt.tn]
Sent: Friday, May 11, 2012 9:55 AM
To: Welton, Andrew M. (JSC-SF)[WYLE INTEG. SCI. & ENG.]
Subject: Re: FLUKA installation

Thanks it works well

----- Original Message -----
From: "Welton, Andrew M. (JSC-SF)[WYLE INTEG. SCI. & ENG.]"
<andrew.m.welton_at_nasa.gov>
To: "Leila Ounalli" <leila.ounalli_at_cnstn.rnrt.tn>
Sent: Friday, May 11, 2012 3:17 PM
Subject: RE: FLUKA installation

You need to type 'python-imaging python-imaging-tk' not just
'python-imaging-tk'. Read my last message a little closer... :)

-----Original Message-----
From: Leila Ounalli [mailto:leila.ounalli_at_cnstn.rnrt.tn]
Sent: Friday, May 11, 2012 9:05 AM
To: Welton, Andrew M. (JSC-SF)[WYLE INTEG. SCI. & ENG.];
fluka-discuss_at_fluka.org
Subject: Re: FLUKA installation

Thanks Andy,
I already put the command "yum -y install python-imaging-tk" and the answer
is as shown in the attached screenshot.
Thanks
----- Original Message -----
From: "Welton, Andrew M. (JSC-SF)[WYLE INTEG. SCI. & ENG.]"
<andrew.m.welton_at_nasa.gov>
To: "Leila Ounalli" <leila.ounalli_at_cnstn.rnrt.tn>; <fluka-discuss_at_fluka.org>
Sent: Friday, May 11, 2012 2:41 PM
Subject: RE: FLUKA installation

I believe that when you want to install the python-imaging library the
command is '(yum -y OR apt-get) install python-imaging python-imaging-tk'.
That should get you where you need to be.

-Andy

-----Original Message-----
From: owner-fluka-discuss_at_mi.infn.it [mailto:owner-fluka-discuss_at_mi.infn.it]
On Behalf Of Leila Ounalli
Sent: Tuesday, May 08, 2012 10:59 AM
To: fluka-discuss_at_fluka.org
Subject: Fw: FLUKA installation

Thanks to Mario, Jean-Michel and Jean-Emmanuel, I did what you ask me to do
and now I am in the final step.
Can you help me to finalize the installation?
Please see attached file.
Regards

----- Original Message -----
From: "Santana, Mario" <msantana_at_SLAC.Stanford.EDU>
To: "Leila Ounalli" <leila.ounalli_at_cnstn.rnrt.tn>; <fluka-discuss_at_fluka.org>
Sent: Monday, May 07, 2012 5:01 PM
Subject: RE: FLUKA installation

> Hi Leila,
>
> The message in the screen shot suggests that you don't have write
> permission to that folder (?).
> As a superuser (type 'su' in the terminal and when prompted give your
> password) you can allow to
> write to a folder by typing in the terminal 'chmod a+w local' (from
> one level up in the directory tree). Alternatively you can save the
> fluka tar to a different location and then move it to 'local'
> as a superuser or using the sudo command.=20
>
> Mario
>
>
>
> -----Original Message-----
> From: owner-fluka-discuss_at_mi.infn.it
> [mailto:owner-fluka-discuss_at_mi.infn.it=
> ] On Behalf Of Leila Ounalli
> Sent: Monday, May 07, 2012 3:25 AM
> To: fluka-discuss_at_fluka.org
> Subject: FLUKA installation
>
>
> Dear FLUKA-experts,
>
> I am going to install FLUKA on my computer containing both WindowsXP
> and Vm= ware.
>
> I am familiar with geant4 and I have a problem to download the tar
> file in = to the FLUKA folder located in the same directory as geant4
> as shown in the= attached screenshot.
>
> I would appreciate if you give me simple steps to install FLUKA.
>
> Regards,
>
> --
> Leila Ounalli (PhD)
> Centre National des Sciences et Technologies Nucl=E9aires
> http://www.cnstn.= rnrt.tn/
> office : +216 71 53 74 10 (post 201)
> Fax : +216 71 53 75 55
> adr. : Technop=F4le Sidi Thabet 2020 Ariana Tunisie
>
Received on Sat May 12 2012 - 17:54:23 CEST