RE: [fluka-discuss]: Is flair working properly ?

From: Zafar Yasin <Zafar.Yasin_at_cern.ch>
Date: Mon, 14 Dec 2015 21:09:21 +0000

Dear Marcus,

Thank you again for your kind attention.

Best regards,
Zafar
________________________________
From: Marcus Matthias Morgenstern
Sent: 14 December 2015 19:55
To: Zafar Yasin; fluka-discuss_at_fluka.org
Subject: Re: [fluka-discuss]: Is flair working properly ?

Dear Zafar,

not that I'm aware of, but using the "Freeze" option in flair this is rather quickly done. I attached my input file from the debugging, but please have a look into the geometry that nothing has been accidentally assigned to the wrong region. Also check the material definition as I just switched it to nickel for testing the geometry.

Best,
Marcus

On 12/14/2015 07:49 PM, Zafar Yasin wrote:
Dear Marcus,

Thank you so much for your reply. I have not made parentheses in the geometry but I have converted file from another MC code, MCNP, to FLUKA.
Is there any possibility to convert parentheses regions directly into union of zones in the input file, I am not finding clear answer from the manual or
you can send me your little editing.

Cheers,
Zafar

________________________________
From: Marcus Matthias Morgenstern
Sent: 14 December 2015 16:40
To: Zafar Yasin; fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>
Subject: Re: [fluka-discuss]: Is flair working properly ?

Dear Zafar,

the problem seems to be in your geometry definition due to parentheses expansion, see e.g. this old thread on the discussion list:

http://www.fluka.org/web_archive/earchive/new-fluka-discuss/5842.html

I quickly checked with a proper zoning definition and in doing so everything runs fine. So you might want to go through your geometry again.

During the test I noticed that there is also something wrong with your definition of M204, e.g. missing definition of M228. This you need to check again as well.

Cheers,
Marcus

On 12/14/2015 02:25 PM, Zafar Yasin wrote:

Dear FLUKA experts,



Since a few days, flair on windows through VM is not working properly even though I changed the recent version of .iso file, etc.

One of the error report is pasted below, it is also indicating to send flair error report to the authors. Please also have a look

on my input file attached but it seems ok, the direction of beam is towards -ve x-axis. The message below is not only for the

file attached but also for other files that were really working ideally. Even some times it don't display geometry and hangs

one has to use power off option instead of proper shutdown.





Dir: /home/flupix/E8
Cmd: /usr/bin/nohup /usr/local/fluka/flutil/rfluka -M 2 E8BD1
$TARGET_MACHINE = Linux
$FLUPRO = /usr/local/fluka

Initial seed already existing
Running fluka in /home/flupix/E8/fluka_1023

======================= Running FLUKA for cycle # 1 =======================
/usr/local/fluka/flutil/rfluka: line 359: 1050 Aborted (core dumped) "${EXE}" < "$INPN" 2> "$LOGF" > "$LOGF"





With Best regards,

Zafar Yasin

ELI NP




__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Dec 14 2015 - 23:38:45 CET

This archive was generated by hypermail 2.3.0 : Mon Dec 14 2015 - 23:38:47 CET