FLUKA: meaning of geometry parameters

[vylet001@mc.duke.edu]

Dear Fluka users,

I am having trouble with geometry, but many runs with GEOEND ...debug did
not find
anything wrong so far. I would appreciate if someone could explain the
meaning
of the parameters below. I suspect that some of these are coordinates and
directionnal
cosines, but more detailed info would be helpful. If this is documented
somewhere,
please let me know. Is IR region number? (Region #1 in my case is a black
hole).

0EXIT BEING CALLED FROM G1, NEXT REGION NOT FOUND.
 IR=   1 XB=-0.36456044D+06 0.61141094D+06-0.88888880D+06 WB=-0.32012556D+00 
0.53688887D+00-0.78055747D+00 DIST= 0.14234839D+06
 IRLTGG=   0 SB=-0.36456044D+06 0.61141094D+06-0.88888880D+06 
UB=-0.32012556D+00 0.53688887D+00-0.78055747D+00
 PR   10-0.36456044D+06 0.61141094D+06-0.88888880D+06-0.32012556D+00 
0.53688887D+00-0.78055747D+00    1
         1         1         1        -5        -4         0         0        
18        14        11
       296       304        22       107       109        15         0       
308        10        10
-0.10000000D+21 0.10000000D+21 0.14234839D+06 0.14234839D+06


Thank you in advance

Vashek Vylet

-----------------------------------------------------------
Vaclav "Vashek" Vylet                   Phone: 919-668-3189
OESO/DUMC Box 3155                        Fax: 919-668-2783
Duke University                         pager: 919-970-1224
Durham, NC 27710, USA         e-mail: vashek.vylet@duke.edu