geometry problem

From: Olaf Hartmann (olaf.hartmann@lnf.infn.it)
Date: Fri Mar 03 2006 - 10:05:54 CET

  • Next message: Manuel Lorenzo Sentis: "(no subject)"

    Ciao,

    I'm trying to get FLUKA running with an input file which I slightly
    modified from the example which comes with the FLUKA code. Looking into
    the output file, it seems to stop directly after the GEOBEGIN statement:

      ***** Next control card ***** BEAMPOS 0.000 0.000
    -50.00 0.000 0.000 0.000

      *---------------- ----------------*

      ***** Next control card ***** GEOBEGIN 0.000 0.000
    0.000 0.000 0.000 0.000 COMBINAT

    Here the log ends.

    Can somebody give me a hint where could be the problem? I send the input
    file below.

    Bye,
    Olaf.

    *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
    TITLE
    Antiproton annihilations on a nuclear target
    *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
    BEAM 5.E+00
    APROTON
    BEAMPOS 0.0 0.0 -150.0
    *
    GEOBEGIN
    COMBINAT
                              My humble geometry
       RPP 1-5000000.0+5000000.0-5000000.0+5000000.0-5000000.0+5000000.0
       SPH 2 0.0 0.0 0.0 100.0
       RPP 3 -10.0 +10.0 -10.0 +10.0 -10.0 +10.0
    *
       XYP 4 0.0
       END
    *
       BH1 5 +1 -2
    *
       VA2 5 +2 -3
    *
       TR3 5 +3 +4
    *
       TR4 5 +3 -4
       END
    GEOEND
    *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
    ASSIGNMAT 5.0 3.0 6.0
    ASSIGNMAT 1.0 1.0
    ASSIGNMAT 2.0 2.0
    *
    EMFCUT -0.010 0.010 1.0 5.0
    PROD-CUT
    *
    SCORE 208.0 210.0
    *
    RANDOMIZE 1.0
    *
    START 1000000.0
    STOP

  • Next message: Manuel Lorenzo Sentis: "(no subject)"

    This archive was generated by hypermail 2.1.6 : Fri Mar 03 2006 - 10:45:59 CET