From: Paola Sala (Paola.Sala@cern.ch)
Date: Mon Mar 27 2006 - 11:19:15 CEST
a simple question: did you link
fluka with the heavvy ion generators?
( the script ldp3qmd does the job).
Heavy ion transport must then be activated
with the EVENTYPE card , putting a 2 in
what(3) and SDUM = DPMJET
check in the output, the heavy ion generators
notify that they are initialized
From: email@example.com on behalf of Fan, Ph.D., Jiajin
Sent: Mon 3/27/2006 6:37 AM
Subject: Question about carbon dose calculation
I'm trying to transport carbon in a cubic water phantom and calculate depth
dose (DD) curve in water using FLUKA. But I found my calculation curve is
slightly different with the experiment curve. The measured curve has a tail
which is contributed by secondary fragments. In my calculation, the DD curve
drop down quickly after Bragg peak and has no tail at all.
I tried 'HADROTHE' and 'PRECISIO' mode but got almost same results. Also I
checked the manual and it seems there is no other input options maybe affect
the transport physics.
In attachment are my input file and depth dose curve calculated by this file
and also the standard measured curve. I changed input file name 'carbon.inp'
to 'carbon.f' in order to pass virus scanning system.
So anybody knows what's wrong in the input file?
This archive was generated by hypermail 2.1.6 : Mon Mar 27 2006 - 15:01:43 CEST