From: Harine, Katherine (Katherine.J.Harine@nasa.gov)
Date: Wed Jul 26 2006 - 21:26:00 CEST
This is a multi-part message in MIME format.
------_=_NextPart_001_01C6B0E9.8B625477
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
When I ran alphas, I used the BEAM card with 4-HELIUM in cols 71-78 and =
no HEAVYION or HI_PROP cards.
- Katherine Harine
-----Original Message-----
From: owner-fluka-discuss@fisica.unimi.it on behalf of Reddell, Brandon =
D
Sent: Wed 7/26/2006 12:53 PM
To: fluka-discuss@fluka.org
Subject: Vacuum stopping error message with Alpha's
=20
Dear FLUKA Forum,
I am trying to run a spectrum of alpha particles on an aluminum/silicon
target. The job quickly aborts with the following error message in both
my .err and .out files:
1NUMBER OF BEAM NUMBER OF BEAM APPROXIMATE NUMBER
AVERAGE TIME USED TIME LEFT (RESERVED NUMBER OF STARS
PARTICLES HANDLED PARTICLES LEFT OF BEAM PARTICLES BY A
BEAM PARTICLE 80.0 SECONDS CREATED
THAT CAN STILL BE
FOR PRINTOUT)
HANDLED
NEXT SEEDS: 0 0 0 0 0 0 12110
C 0 0
*** Vacuum stopping: Ij, Pla, Ekin -6 0. 0.
In the past, this file worked fine with FLUKA2003. The only difference
now is that I changed the source a little bit, which I don't think is
the problem. If you change the source type to any other heavy ion the
job appears to run fine. Below is my input file for reference. Any help
would be appreciated.
Sincerely,
Brandon Reddell
--------------input file below this line------------
TITLE
Alpha particle test run
DEFAULTS
PRECISIO
*23456789 123456789 123456789 123456789 123456789 123456789 123456789
123456789
BEAM -100.0
HEAVYION
HI-PROPE 2.0 4.0
BEAMPOS 0.0000 0.0000 -0.0100
EVENTYPE 2.0
DPMJET
DPMJET 0.0
GEOBEGIN 0.01
COMBINAT
*23456789 123456789 123456789 123456789 123456789 123456789 123456789
123456789
standard aluminum slab
SPH 1 0.0 0.0 0.0 +20000.0
RPP 2 -5000.0 +5000.0 -5000.0 +5000.0 -5000.0 +5000.0
XYP 3 0.0
XYP 4 0.037037
XYP 5 0.047037
END
* Black Hole
1 6 1 -2
* Vacuum
2 6 2 +3
* Aluminum
3 6 2 +4 -3
* Silicon
4 6 2 +5 -4
* Vacuum
5 6 2 -5
END
GEOEND
*23456789 123456789 123456789 123456789 123456789 123456789 123456789
123456789
* External Black Hole
ASSIGNMAT 1.0 1.0
* Vacuum
ASSIGNMAT 2.0 2.0
* Aluminum
ASSIGNMAT 10.0 3.0
* Silicon
ASSIGNMAT 14.0 4.0
* Vacuum
ASSIGNMAT 2.0 5.0
*
LOW-NEUT 0.0
EMF
EMFCUT -1.00E-06 1.0E-07 0.0 10.0 10.0
PROD-CUT
EMFCUT -1.00E-06 1.0E-07 0.0 14.0 14.0
PROD-CUT
*23456789 123456789 123456789 123456789 123456789 123456789 123456789
123456789
SCORE 208.0 201.0 211.0
* **** Scoring ****
*23456789 123456789 123456789 123456789 123456789 123456789 123456789
123456789
USRBIN 10.0 208.0 -50.0 1000.0 1000.0 0.047037
thinSi
USRBIN -1000.0 -1000.0 0.037037 100.0 100.0 20.0 &
*
RANDOMIZE 1. 0.1274E+07
*23456789 123456789 123456789 123456789 123456789 123456789 123456789
123456789
SOURCE
START 0.2700E+07
STOP
------_=_NextPart_001_01C6B0E9.8B625477
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
6.5.7233.28">
<TITLE>RE: Vacuum stopping error message with Alpha's</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=3D2>When I ran alphas, I used the BEAM card with 4-HELIUM =
in cols 71-78 and no HEAVYION or HI_PROP cards.<BR>
<BR>
- Katherine Harine<BR>
<BR>
<BR>
<BR>
-----Original Message-----<BR>
From: owner-fluka-discuss@fisica.unimi.it on behalf of Reddell, Brandon =
D<BR>
Sent: Wed 7/26/2006 12:53 PM<BR>
To: fluka-discuss@fluka.org<BR>
Subject: Vacuum stopping error message with Alpha's<BR>
<BR>
<BR>
Dear FLUKA Forum,<BR>
<BR>
I am trying to run a spectrum of alpha particles on an =
aluminum/silicon<BR>
target. The job quickly aborts with the following error message in =
both<BR>
my .err and .out files:<BR>
<BR>
1NUMBER OF BEAM NUMBER OF =
BEAM APPROXIMATE NUMBER<BR>
AVERAGE TIME USED TIME LEFT =
(RESERVED NUMBER OF STARS<BR>
PARTICLES HANDLED PARTICLES =
LEFT OF BEAM =
PARTICLES BY A<BR>
BEAM PARTICLE 80.0 =
SECONDS CREATED<BR>
&=
nbsp; &n=
bsp; &nb=
sp; THAT CAN STILL BE<BR>
FOR PRINTOUT)<BR>
&=
nbsp; &n=
bsp; &nb=
sp; HANDLED<BR>
<BR>
NEXT SEEDS: =
0 =
0 =
0 =
0 =
0 0 12110<BR>
C =
0 0<BR>
*** Vacuum stopping: Ij, Pla, Ekin -6 0. 0.<BR>
<BR>
In the past, this file worked fine with FLUKA2003. The only =
difference<BR>
now is that I changed the source a little bit, which I don't think =
is<BR>
the problem. If you change the source type to any other heavy ion =
the<BR>
job appears to run fine. Below is my input file for reference. Any =
help<BR>
would be appreciated.<BR>
<BR>
Sincerely,<BR>
<BR>
Brandon Reddell<BR>
<BR>
<BR>
--------------input file below this line------------<BR>
TITLE<BR>
Alpha particle test run<BR>
DEFAULTS<BR>
PRECISIO<BR>
*23456789 123456789 123456789 123456789 123456789 123456789 =
123456789<BR>
123456789<BR>
BEAM -100.0<BR>
HEAVYION<BR>
HI-PROPE 2.0 4.0<BR>
BEAMPOS 0.0000 0.0000 =
-0.0100<BR>
EVENTYPE  =
; 2.0<BR>
DPMJET<BR>
DPMJET &=
nbsp; 0.0<BR>
GEOBEGIN  =
; 0.01<BR>
COMBINAT<BR>
*23456789 123456789 123456789 123456789 123456789 123456789 =
123456789<BR>
123456789<BR>
&=
nbsp; =
standard aluminum slab<BR>
SPH 1 =
0.0 =
0.0 0.0 +20000.0<BR>
RPP 2 -5000.0 =
+5000.0 -5000.0 +5000.0 =
-5000.0 +5000.0<BR>
XYP 3 =
0.0<BR>
XYP 4 0.037037<BR>
XYP 5 0.047037<BR>
END<BR>
* Black Hole<BR>
1 6 =
1 -2<BR>
* Vacuum<BR>
2 6 =
2 +3<BR>
* Aluminum<BR>
3 6 =
2 +4 -3<BR>
* Silicon<BR>
4 6 =
2 +5 -4<BR>
* Vacuum<BR>
5 6 =
2 -5<BR>
END<BR>
GEOEND<BR>
*23456789 123456789 123456789 123456789 123456789 123456789 =
123456789<BR>
123456789<BR>
* External Black Hole<BR>
ASSIGNMAT 1.0 1.0<BR>
* Vacuum<BR>
ASSIGNMAT 2.0 2.0<BR>
* Aluminum<BR>
ASSIGNMAT 10.0 3.0<BR>
* Silicon<BR>
ASSIGNMAT 14.0 4.0<BR>
* Vacuum<BR>
ASSIGNMAT 2.0 5.0<BR>
*<BR>
LOW-NEUT  =
; =
0.0<BR>
EMF<BR>
EMFCUT -1.00E-06 =
1.0E-07 =
0.0 10.0 =
10.0<BR>
PROD-CUT<BR>
EMFCUT -1.00E-06 =
1.0E-07 =
0.0 14.0 =
14.0<BR>
PROD-CUT<BR>
*23456789 123456789 123456789 123456789 123456789 123456789 =
123456789<BR>
123456789<BR>
SCORE 208.0 =
201.0 211.0<BR>
* **** Scoring ****<BR>
*23456789 123456789 123456789 123456789 123456789 123456789 =
123456789<BR>
123456789<BR>
USRBIN =
10.0 208.0 =
-50.0 1000.0 1000.0 =
0.047037<BR>
thinSi<BR>
USRBIN -1000.0 -1000.0 =
0.037037 100.0 =
100.0 20.0 &<BR>
*<BR>
RANDOMIZE 1. 0.1274E+07<BR>
*23456789 123456789 123456789 123456789 123456789 123456789 =
123456789<BR>
123456789<BR>
SOURCE<BR>
START 0.2700E+07<BR>
STOP<BR>
<BR>
<BR>
<BR>
<BR>
</FONT>
</P>
</BODY>
</HTML>
------_=_NextPart_001_01C6B0E9.8B625477--
This archive was generated by hypermail 2.1.6 : Wed Aug 02 2006 - 15:19:26 CEST