Re: [fluka-discuss]: flair installation problem on UBUNTU 18.04

From: Jilberto Antonio Zamora Saá <jzamorasaa_at_jinr.ru>
Date: Mon, 21 May 2018 13:15:16 -0400

Dear Andrea:

I have installed gcc and g++, the following versions:

gcc (Ubuntu 7.3.0-16ubuntu3) 7.3.0

g++ (Ubuntu 7.3.0-16ubuntu3) 7.3.0

I also have installed the other fluka requirements, however, nothing
change, I got the same error message.

regards Jilberto

---
*******************************************************************
  Dr. Jilberto Zamora Saa
  Dzhelepov Laboratory of Nuclear Problems
  Joint Institute for Nuclear Research
  141980 Dubna, Moscow region, Russia
  phone: +(496)2162589 (Office)
  phone: +7(915)4671294 (Mobile)
  email: jzamorasaa_at_jinr.ru
********************************************************************
El 21-05-2018 11:32 am, Andrea Fontana escribió:
> Hi Jilberto,
>    strange... do you have C and C++ compilers installed on your Ubuntu 
> machine?
> Which versions? You can verify with the commands:
> 
> gcc --version
> g++ --version
> 
> Also check the other Flair requirements at:
> http://www.fluka.org/flair/download.html
> 
> I recommend you install all the indicated packages.
> 
> Andrea
> 
> 
> Il 21/05/2018 17:24, Jilberto Antonio Zamora Saá ha scritto:
>> Dear Andrea:
>> I already try and got:
>> 
>> jilberto_at_sirjazs:~/FLAIR/flair-geoviewer-2.3$ make
>> make -C optimizer
>> make[1]: Entering directory 
>> '/home/jilberto/FLAIR/flair-geoviewer-2.3/optimizer'
>> c++ -c roi.cc -m64 -DUNIX -O4 -funroll-loops -g -DNDEBUG -D_DEBUG=0 
>> -DTHREAD -Wall -Wcast-align -Wcast-qual -Wextra -Wformat 
>> -Wpointer-arith -Wredundant-decls -Wshadow -Wno-write-strings -fwrapv 
>> -fstack-protector -fpic -I../utils -I../math -I../graph -I../geometry 
>> -I../data -fstrict-aliasing
>> In file included from ../data/eventbin.h:43:0,
>>                  from roi.h:19,
>>                  from roi.cc:11:
>> ../data/usrbin.h: In member function ‘double Usrbin::get(double, 
>> double, double, bool*) const’:
>> ../data/usrbin.h:221:9: error: ‘pow10’ was not declared in this scope
>>      v = pow10(v);
>>          ^~~~~
>> ../data/usrbin.h:221:9: note: suggested alternative: ‘powl’
>>      v = pow10(v);
>>          ^~~~~
>>          powl
>> ../data/usrbin.h: In member function ‘double Usrbin::get(int, bool*) 
>> const’:
>> ../data/usrbin.h:228:9: error: ‘pow10’ was not declared in this scope
>>      v = pow10(v);
>>          ^~~~~
>> ../data/usrbin.h:228:9: note: suggested alternative: ‘powl’
>>      v = pow10(v);
>>          ^~~~~
>>          powl
>> ../rules.mk:209: recipe for target 'roi.o' failed
>> make[1]: *** [roi.o] Error 1
>> make[1]: Leaving directory 
>> '/home/jilberto/FLAIR/flair-geoviewer-2.3/optimizer'
>> makefile:286: recipe for target 'optimizer/liboptimizer.a' failed
>> make: *** [optimizer/liboptimizer.a] Error 2
>> 
>> 
>> 
>> regards Jilberto
>> 
>> ---
>> *******************************************************************
>>  Dr. Jilberto Zamora Saa
>>  Dzhelepov Laboratory of Nuclear Problems
>>  Joint Institute for Nuclear Research
>>  141980 Dubna, Moscow region, Russia
>>  phone: +(496)2162589 (Office)
>>  phone: +7(915)4671294 (Mobile)
>>  email: jzamorasaa_at_jinr.ru
>> 
>> ********************************************************************
>> 
>> El 21-05-2018 10:34 am, Andrea Fontana escribió:
>>> Dear Jilberto,
>>>     did you try to install Flair from the tar file
>>> by running make and make install?
>>> 
>>> Andrea
>>> 
>>> 
>>> Il 21/05/2018 15:04, Jilberto Antonio Zamora Saá ha scritto:
>>>> Dear FLUKA-Experts:
>>>> 
>>>> I upgraded my OS to UBUNTU 18.04 and I already installed the new 
>>>> FLUKA version (the one which requires gfortran 7.3) which works fine 
>>>> in my system. However, I'm trying to install flair and when I'm 
>>>> going through flair-geoviewer I got the next problem
>>>> 
>>>> 
>>>> 
>>>> 
>>>> jilberto_at_sirjazs:~/FLUKA$ sudo dpkg -i 
>>>> flair-geoviewer_2.3-0_i386.deb
>>>> Selecting previously unselected package flair-geoviewer:i386.
>>>> (Reading database ... 140426 files and directories currently 
>>>> installed.)
>>>> Preparing to unpack flair-geoviewer_2.3-0_i386.deb ...
>>>> Unpacking flair-geoviewer:i386 (2.3-0) ...
>>>> dpkg: dependency problems prevent configuration of 
>>>> flair-geoviewer:i386:
>>>>  flair-geoviewer:i386 depends on flair (= 2.3-0).
>>>>  flair-geoviewer:i386 depends on python-imaging-tk.
>>>> 
>>>> dpkg: error processing package flair-geoviewer:i386 (--install):
>>>>  dependency problems - leaving unconfigured
>>>> Errors were encountered while processing:
>>>>  flair-geoviewer:i386
>>>> 
>>>> 
>>>> I already installed Python 2.7.15rc1 on my system.
>>>> 
>>>> Any helps will be WELCOME!!
>>>> 
>>>> regards Jilberto
>>>> 
>> 
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

Received on Mon May 21 2018 - 20:21:30 CEST