Dear Zhiyuan,
a possible accuracy issue was present when WED/RAW bodies where improperly used.
The alternative is to use infinite planes to define the regions of interest.
Hope this helps
Kind regards
Lefteris
-----------------------
Eleftherios Skordis
Dep. EN/STI, CERN
CH-1211 GENEVA 23
SWITZERLAND
OFFICE: +41-22-7679541<tel:%2B41-22-7675461>
________________________________
From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of ÷־Զ [meizhiyuan_at_hust.edu.cn]
Sent: 23 May 2018 11:17
To: fluka discuss
Subject: [fluka-discuss]: Fluka use problem
Dear FLUKA experts,
I am a FLUKA user. WED and RAW cards could be used for the angle wedge model building. But after I updated FLUKA to the latest version fluka2011.2x-linuxAA, I found that the error will be showed when WED and RAW was used. I want to know why the cards WED and RAW could be no longer used. And what else card could be used for the angle wedge model building?
Thank you very much and looking forward to your reply.
Best regards,
Zhiyuan
--
Zhiyuan Mei
meizhiyuan_at_hust.edu.cn<mailto:meizhiyuan_at_hust.edu.cn>
/---------------------------------------------------
Institute of Applied Electromagnetic Engineering(IAEE)
Huazhong University of Science and Technology(HUST)
Address: Luoyu Road 1037, Wuhan, China
Tel: +86-155-2701-7168
/---------------------------------------------------
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Wed May 23 2018 - 16:04:18 CEST