Re: [fluka-discuss]: Issues with fluka2011.2x

From: SIZWE SCELO MHLONGO <3698012_at_myuwc.ac.za>
Date: Thu, 31 May 2018 23:54:05 +0200

Hi Lefteris,

Thank you for your assistance. I found out what the problem was - the name
of one of my directories had a spacing in between, and as a result it could
not be located. Thanks.

Regards,

Sizwe

On Mon, May 28, 2018 at 11:06 AM, Eleftherios Skordis <
eleftherios.skordis_at_cern.ch> wrote:

> Dear Sizwe,
>
> your input file work fine in my machine.
> It seems like your version was probably expired and you either have not
> properly installed the new version or you are not pointing to the installed
> version.
>
> Tryt to:
> open the flair settings and point to your correct FLUKA installation.
>
> check if the $FLUPRO variable points to your FLUKA installation.
>
> if the all check, try reinstalling FLUKA
>
> Hope this helps
>
> Kind regards
>
> Lefteris
>
> P.S. please keep mails in the list so that others may benefit from similar
> problems
>
>
>
> -----------------------
>
> Eleftherios Skordis
> Dep. EN/STI, CERN
> CH-1211 GENEVA 23
> SWITZERLAND
>
> OFFICE: +41-22-7679541 <%2B41-22-7675461>
> ------------------------------
> *From:* SIZWE SCELO MHLONGO [3698012_at_myuwc.ac.za]
> *Sent:* 27 May 2018 19:09
> *To:* Eleftherios Skordis
> *Subject:* Re: [fluka-discuss]: Issues with fluka2011.2x
>
> Hi Lefteris,
>
> Please see the attached input and output files.
>
> Just to outline what I'm trying to do, in the input I'm simulating an
> activation of a multi-elemental sample with a 14.1 MeV beam of neutrons.
>
> Regards,
>
> Sizwe
>
> On Sat, May 26, 2018 at 12:56 AM, Eleftherios Skordis <
> eleftherios.skordis_at_cern.ch> wrote:
>
>> Dear Sizwe,
>>
>> could you please sent us your .out file and if possible your input file,
>> so we can assist you with your problem.
>>
>> Kind regards
>>
>> Lefteris
>>
>>
>>
>> -----------------------
>>
>> Eleftherios Skordis
>> Dep. EN/STI, CERN
>> CH-1211 GENEVA 23
>> SWITZERLAND
>>
>> OFFICE: +41-22-7679541 <%2B41-22-7675461>
>> ------------------------------
>> *From:* owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it]
>> on behalf of SIZWE SCELO MHLONGO [3698012_at_myuwc.ac.za]
>> *Sent:* 25 May 2018 23:45
>> *To:* fluka-discuss_at_fluka.org
>> *Subject:* [fluka-discuss]: Issues with fluka2011.2x
>>
>> Dear FLUKA experts and community,
>>
>> I have been using FLUKA (version fluka2011.2c-linux-gfor6.3-64bitAA) on
>> 64 bit machine, with Ubuntu 16.04, and it has been working fine. I tried
>> running an input file recently and the run wouldn't display progress on
>> flair, I tried another input file that had been working but it also didn't
>> run. When processing it reports on the output that "Cannot execute
>> command", for all the detectors.
>>
>> I've tried installing the new versions (2x) for gfortran but the same
>> problem persists. Please kindly assist.
>>
>> Best regards,
>>
>> Sizwe
>>
>>
>>
>>
>>
>> Disclaimer - This e-mail is subject to UWC policies and e-mail disclaimer
>> published on our website at: https://www.uwc.ac.za/Pages/em
>> aildisclaimer.aspx
>>
>>
>>
>>
>
>
>
>
>
> Disclaimer - This e-mail is subject to UWC policies and e-mail disclaimer
> published on our website at: https://www.uwc.ac.za/Pages/em
> aildisclaimer.aspx
>
>
>
>

-- 
Disclaimer - This e-mail is subject to UWC policies and e-mail 
disclaimer published on our website at: 
https://www.uwc.ac.za/Pages/emaildisclaimer.aspx 
<https://www.uwc.ac.za/Pages/emaildisclaimer.aspx>
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Jun 01 2018 - 01:41:12 CEST

This archive was generated by hypermail 2.3.0 : Fri Jun 01 2018 - 01:41:20 CEST