[fluka-discuss]: Re: *** SPAM *** Re: *** SPAM *** Re: *** SPAM *** Re: [fluka-discuss]: installing fluka-2011.2x-3.x86_64 on fedora 24?

From: Horváth Dávid <David.Horvath_at_eli-beams.eu>
Date: Mon, 27 Aug 2018 09:42:57 +0000

Dear Mahmoudreza,

You only need to put in your .bashrc file, the following lines:

export FLUPRO=/usr/local/fluka
export FLUFOR=gfortran

This should solve your problem.

Kind regards,
Dávid Horváth

Junior Researcher
Radiation Protection
ELI Beamlines

E: david.horvath_at_eli-beams.eu
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic


________________________________________
From: mrakbari2015_at_ast.ui.ac.ir <mrakbari2015_at_ast.ui.ac.ir>
Sent: 27 August 2018 03:52:25
To: Horváth Dávid
Cc: fluka-discuss_at_fluka.org
Subject: Re: *** SPAM *** Re: *** SPAM *** Re: *** SPAM *** Re: [fluka-discuss]: installing fluka-2011.2x-3.x86_64 on fedora 24?

Quoting Horváth Dávid <David.Horvath_at_eli-beams.eu<mailto:David.Horvath_at_eli-beams.eu>>:

Dear Mahmoudreza,

.bashrc is a hidden file in your /home/<username>/ directory, you can edit with any text editor.

You can write any command in this file. These commands will be executed every time you open a new terminal.

In the pictures you used the FLUPRO=/pathto/fluka. "pathto" is just a place holder for the path to FLUKA's folder. In your case something like /usr/home/fluka

Kind regards,
Dávid Horváth

Junior Researcher
Radiation Protection
ELI Beamlines

E: david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu>
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic


________________________________________
From: mrakbari2015_at_ast.ui.ac.ir<mailto:mrakbari2015_at_ast.ui.ac.ir> <mrakbari2015_at_ast.ui.ac.ir<mailto:mrakbari2015_at_ast.ui.ac.ir>>
Sent: 25 August 2018 05:00:03
To: Horváth Dávid
Cc: fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>
Subject: Re: *** SPAM *** Re: *** SPAM *** Re: [fluka-discuss]: installing fluka-2011.2x-3.x86_64 on fedora 24?

Quoting Horváth Dávid <David.Horvath_at_eli-beams.eu<mailto:David.Horvath_at_eli-beams.eu><mailto:David.Horvath_at_eli-beams.eu>>:<mailto:David.Horvath_at_eli-beams.eu>>:>

Dear Mahmoudreza,

it seems that your $FLUPRO variable is not set up correctly.

You can find the relevant information here: http://www.fluka.org/fluka.php?id=ins_run

Kind regards,
Dávid Horváth

Junior Researcher
Radiation Protection
ELI Beamlines

E: david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu><mailto:david.horvath_at_eli-beams.eu><mailto:david.horvath_at_eli-beams.eu>>
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic


________________________________________
From: mrakbari2015_at_ast.ui.ac.ir<mailto:mrakbari2015_at_ast.ui.ac.ir><mailto:mrakbari2015_at_ast.ui.ac.ir><mailto:mrakbari2015_at_ast.ui.ac.ir>> <mrakbari2015_at_ast.ui.ac.ir<mailto:mrakbari2015_at_ast.ui.ac.ir><mailto:mrakbari2015_at_ast.ui.ac.ir>><mailto:mrakbari2015_at_ast.ui.ac.ir>>>
Sent: 24 August 2018 05:54:31
To: Horváth Dávid
Cc: fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org><mailto:fluka-discuss_at_fluka.org><mailto:fluka-discuss_at_fluka.org>>
Subject: Re: *** SPAM *** Re: [fluka-discuss]: installing fluka-2011.2x-3.x86_64 on fedora 24?

Quoting Horváth Dávid <David.Horvath_at_eli-beams.eu<mailto:David.Horvath_at_eli-beams.eu><mailto:David.Horvath_at_eli-beams.eu><mailto:David.Horvath_at_eli-beams.eu>><mailto:David.Horvath_at_eli-beams.eu>>:<mailto:David.Horvath_at_eli-beams.eu>>:><mailto:David.Horvath_at_eli-beams.eu>>:><mailto:David.Horvath_at_eli-beams.eu>>:>>

Dear Mahmoudreza,

the error message means that you are not an administrator on the PC, or your username wasn't added to the sudoer list. You can execute the command as root, or ask you system administrator to do it.

Alternatively you can install FLUKA in your home directory.

Kind regards,
Dávid Horváth

Junior Researcher
Radiation Protection
ELI Beamlines

E: david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu><mailto:david.horvath_at_eli-beams.eu><mailto:david.horvath_at_eli-beams.eu>><mailto:david.horvath_at_eli-beams.eu><mailto:david.horvath_at_eli-beams.eu>><mailto:david.horvath_at_eli-beams.eu>><mailto:david.horvath_at_eli-beams.eu>>>
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic


________________________________________
From: mrakbari2015_at_ast.ui.ac.ir<mailto:mrakbari2015_at_ast.ui.ac.ir><mailto:mrakbari2015_at_ast.ui.ac.ir><mailto:mrakbari2015_at_ast.ui.ac.ir>><mailto:mrakbari2015_at_ast.ui.ac.ir><mailto:mrakbari2015_at_ast.ui.ac.ir>><mailto:mrakbari2015_at_ast.ui.ac.ir>><mailto:mrakbari2015_at_ast.ui.ac.ir>>> <mrakbari2015_at_ast.ui.ac.ir<mailto:mrakbari2015_at_ast.ui.ac.ir><mailto:mrakbari2015_at_ast.ui.ac.ir><mailto:mrakbari2015_at_ast.ui.ac.ir>><mailto:mrakbari2015_at_ast.ui.ac.ir>><mailto:mrakbari2015_at_ast.ui.ac.ir>>><mailto:mrakbari2015_at_ast.ui.ac.ir>>><mailto:mrakbari2015_at_ast.ui.ac.ir>>>>
Sent: 23 August 2018 04:24
To: Horváth Dávid
Cc: fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org><mailto:fluka-discuss_at_fluka.org><mailto:fluka-discuss_at_fluka.org>><mailto:fluka-discuss_at_fluka.org><mailto:fluka-discuss_at_fluka.org>><mailto:fluka-discuss_at_fluka.org>><mailto:fluka-discuss_at_fluka.org>>>
Subject: Re: *** SPAM *** Re: *** SPAM *** Re: [fluka-discuss]: installing fluka-2011.2x-3.x86_64 on fedora 24?


Dear Horváth,<https://www.fluka.org/fluka.php?id%C5%B9c_info>
I have tried your second recommendation but unfortunatly the following error has occured. I don't know what it means. Would you please explain the concept of this report?

[mrakbari2012_at_mahmoudreza<mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza>><mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza>><mailto:mrakbari2012_at_mahmoudreza>><mailto:mrakbari2012_at_mahmoudreza>>> ~]$ cd /usr/local/flukagfor
[mrakbari2012_at_mahmoudreza<mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza>><mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza>><mailto:mrakbari2012_at_mahmoudreza>><mailto:mrakbari2012_at_mahmoudreza>>> flukagfor]$ sudo chmod -R a+rX *

We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:

#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.

mrakbari2012 is not in the sudoers file. This incident will be reported.
[mrakbari2012_at_mahmoudreza<mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza>><mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza>><mailto:mrakbari2012_at_mahmoudreza>><mailto:mrakbari2012_at_mahmoudreza>>> flukagfor]$ /usr/local/flukagfor/flutil/ldpmqmd
bash: /usr/local/flukagfor/flutil/ldpmqmd: Permission denied
Kind Regards,




__________________________________________________________________________You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?idŹc_info<https://www.fluka.org/fluka.php?id%C5%B9c_info><https://www.fluka.org/fluka.php?id%C5%B9c_info><https://www.fluka.org/fluka.php?id%C5%B9c_info>


Dear Dávid,
Words can not describe how thankful i am. I performed what you said, but unfortunatly the following error has occured:
[mrakbari2012_at_mahmoudreza<mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza><mailto:mrakbari2012_at_mahmoudreza>> ~]$ su -
Password:
[root_at_mahmoudreza<mailto:root_at_mahmoudreza><mailto:root_at_mahmoudreza><mailto:root_at_mahmoudreza>> ~]# cd /usr/local/flukagfor
[root_at_mahmoudreza<mailto:root_at_mahmoudreza><mailto:root_at_mahmoudreza><mailto:root_at_mahmoudreza>> flukagfor]# sudo chmod -R a+rX *
[root_at_mahmoudreza<mailto:root_at_mahmoudreza><mailto:root_at_mahmoudreza><mailto:root_at_mahmoudreza>> flukagfor]# /usr/local/flukagfor/flutil/ldpmqmd
/usr/local/flukagfor/flutil/ldpmqmd: line 2: /flutil/lfluka: No such file or directory
[root_at_mahmoudreza<mailto:root_at_mahmoudreza><mailto:root_at_mahmoudreza><mailto:root_at_mahmoudreza>> flukagfor]#

I am the only administrator of this computer, because i installed this fluka version on fedora 24 on my personal computer. I can be as a root for installing programs, changing the time of the system, etc. I was wondering that the problem is relevant to process of the fluka installation. Since i did not define few environmental variables. I start my installation from cp /path/fluka2011.2-linuxAA.tar.gz ./ step in the /usr/fluka/flukagfor directory which had been created through the previous version of the fluka. I went to the /usr/fluka/flukagfor directory and continue the following command.
Attached files are the contents of my directories which i hope to help you finde the principle problem.
Best wishes,


__________________________________________________________________________You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

Dear Dávid,
I followed the instruction but I can not understand these sentences and how to apply them in fedora 24?
Note: Such definition of the environment variables are lost when you log out. In order to make it
permanently available you should add the export/setenv command to your shell configuration file:
– If you work on bash add them to your .bashrc file;
please let me know the step by step procedures.
please see the attached files for detecting the problem?
Thanks a bunch in advance,




__________________________________________________________________________You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id¬c_info<https://www.fluka.org/fluka.php?id%C2%ACc_info>


Dear David,
During follow the installation instructions, I can not understand the following sentences? Are they relevant to my installation of fedora 24? the sentences are as follows:
1-In case FLUFOR is not set the script does an attempt of checking if the name of the $FLUPRO
directory contains the gfor string. In this case gfortran is selected. If the FLUFOR variable is
not set and the compiler platform name is not coded in the directory name g77 is selected.
2-– GFORFLU (optional): set to specify the specific version of gfortran to be used if more than one
is available (i.e. if on your machine gfortran points to a version < 4.6, and gfortran46 points
to version 4.6, you can set GFORFLU to gfortran46 and happily use the Fluka gfortran 64 bits version).
3-Note: Such definition of the environment variables are lost when you log out. In order to make it
permanently available you should add the export/setenv command to your shell configuration file:
– If you work on bash add them to your .bashrc file;
– If you work on csh (or tcsh add them to your .cshrc (or .tcshrc) file;
Furthermore, is it necessary to do this step (however i did it in my installation procedure!)
4-FLUFOR (optional): containing the compiler type (gfortran or g77) which must be coherent with
the architecture of the package you downloaded. If you work on bash do:
> export FLUFOR=g77
or
> export FLUFOR=gfortran
or if you work on csh or tcsh do:
> setenv FLUFOR g77
or
> setenv FLUFOR gfortran
Please let me know the exact concept of these sentences!!!However I can understand their meaning?
Thanks indeed
Best wishes,
Mahmoudreza

__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id¬c_info
Received on Mon Aug 27 2018 - 13:07:06 CEST

This archive was generated by hypermail 2.3.0 : Mon Aug 27 2018 - 13:07:12 CEST