Re: *** SPAM *** Re: [fluka-discuss]: installing fluka-2011.2x-3.x86_64 on fedora 24?

From: Horváth Dávid <David.Horvath_at_eli-beams.eu>
Date: Mon, 3 Sep 2018 14:21:11 +0000

Dear Mahmoudreza,

The warning are normal, you don't have to concerned about them.

The permission error probably could be fixed with the following command as root:
chmod 755 /usr/local/fluka

Kind regards,
Dávid Horváth

Junior Researcher
Radiation Protection
ELI Beamlines

E: david.horvath_at_eli-beams.eu
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic


________________________________________
From: mrakbari2015_at_ast.ui.ac.ir <mrakbari2015_at_ast.ui.ac.ir>
Sent: 02 September 2018 04:51:17
To: Horváth Dávid
Cc: Fasso, Alberto; fluka-discuss_at_fluka.org
Subject: Re: *** SPAM *** Re: [fluka-discuss]: installing fluka-2011.2x-3.x86_64 on fedora 24?

Quoting Horváth Dávid <David.Horvath_at_eli-beams.eu<mailto:David.Horvath_at_eli-beams.eu>>:

Dear Mahmoudreza,

1.) It's not needed to add the "source .bashrc" command to the .bashrc file. You just need to execute this command in the terminal after editing the .bashrc file.

2.) According to your screen shot the FLUPRO variable is now correctly set up, but some permissions needs to be fixed.

As root run the following commands:
cd /usr/local/fluka
chmod -R a+rX *

This should fix your permission problem, and you should be able to run FLUKA as non root.

Kind regards,
Dávid Horváth

Junior Researcher
Radiation Protection
ELI Beamlines

E: david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu>
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic


________________________________________
From: mrakbari2015_at_ast.ui.ac.ir<mailto:mrakbari2015_at_ast.ui.ac.ir> <mrakbari2015_at_ast.ui.ac.ir<mailto:mrakbari2015_at_ast.ui.ac.ir>>
Sent: 29 August 2018 03:31:08
To: Fasso, Alberto
Cc: Horváth Dávid; fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>
Subject: Re: [fluka-discuss]: installing fluka-2011.2x-3.x86_64 on fedora 24?

Quoting "Fasso, Alberto" <fasso_at_slac.stanford.edu<mailto:fasso_at_slac.stanford.edu><mailto:fasso_at_slac.stanford.edu>>:<mailto:fasso_at_slac.stanford.edu>>:>

____________________________________

To apply the changes in the .bashrc file, you should log out and log in again.

It is not necessary to log out. Just type:
source .bashrc
Alberto

Dear Dr. Fasso
Thanks for taking time for solving my problem. I edited .bashrc file according to recommendation. Unfortunately my problem has not been solved. Attached file is my .bashrc file image and my terminal commands.
Any help would be apprtiated
Kind Regards,
Mahmoudreza


__________________________________________________________________________You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info


Dear David,
I installed fluka but i am concered about these messages?
/usr/local/fluka/flutil/fff -N detsuw.f
detsuw.f:175:5:

  9999 CONTINUE
     1
Warning: Label 9999 at (1) defined but not used
/usr/local/fluka/flutil/fff -N usbrea.f
usbrea.f:311:72:

      & ERR = 6750 )
                                                                        1
Warning: The STATUS specified in OPEN statement at (1) is ‘NEW’ and no FILE specifier is present
usbrea.f:536:5:

  8970 FORMAT (/,1X,'*****',2X,A80,2X,'*****',/,/,10X,A32,/,/,
     1
Warning: Label 8970 at (1) defined but not used
usbrea.f:511:5:

  8650 FORMAT (/,3X,'Binning n:',I5,', "',A10,'", Event #:',I6,
     1
Warning: Label 8650 at (1) defined but not used
usbrea.f:457:5:

  8496 FORMAT (6X,'Single precision storage requested for this binning')
     1
Warning: Label 8496 at (1) defined but not used
usbrea.f:455:5:

  8493 FORMAT (6X,'Coordinate transformation #',I4,
     1
Warning: Label 8493 at (1) defined but not used
usbrea.f:448:5:

  8460 FORMAT (6X,'normalized (per unit volume) data will be printed',
     1
Warning: Label 8460 at (1) defined but not used
usbrea.f:447:5:

  8450 FORMAT (6X,'unnormalized data will be printed event by event')
     1
Warning: Label 8450 at (1) defined but not used
/usr/local/fluka/flutil/fff -N usbsuw.f
/usr/local/fluka/flutil/fff -N usrsuw.f
/usr/local/fluka/flutil/fff -N usrsuwev.f
usrsuwev.f:435:72:

          FILE1 = FILE
                                                                        1
Warning: CHARACTER expression will be truncated in assignment (210/232) at (1) [-Wcharacter-truncation]
/usr/local/fluka/flutil/fff -N ustsuw.f
ustsuw.f:951:5:

 10004 FORMAT ((1X,A,1X,1P,G14.7,1X,G14.7))
     1
Warning: Label 10004 at (1) defined but not used
/usr/local/fluka/flutil/fff -N usxrea.f
/usr/local/fluka/flutil/fff -N usxsuw.f
usxsuw.f:1042:5:

  9503 FORMAT (2(1X,1P,E10.3),/,(20(1X,1P,E10.3)))
     1
Warning: Label 9503 at (1) defined but not used
usxsuw.f:1040:5:

  9502 FORMAT ((20(1X,1P,E10.3)))
     1
Warning: Label 9502 at (1) defined but not used
/usr/local/fluka/flutil/fff -N usysuw.f
usysuw.f:566:72:

             FILE1 = FILE
                                                                        1
Warning: CHARACTER expression will be truncated in assignment (220/232) at (1) [-Wcharacter-truncation]
usysuw.f:663:72:

             FILE1 = FILE
                                                                        1
Warning: CHARACTER expression will be truncated in assignment (220/232) at (1) [-Wcharacter-truncation]
/usr/local/fluka/flutil/fff -N gplevbin.f
gplevbin.f:376:72:

                   WRITE (93,*) Y+DYBIN,XM,FLUMAT(IDOS),FLEMAT(IDOS)*100.0
                                                                        1
Warning: Line truncated at (1) [-Wline-truncation]
gplevbin.f:378:72:

                   WRITE (93,*) XM,Y+DYBIN,FLUMAT(IDOS),FLEMAT(IDOS)*100.0
                                                                        1
Warning: Line truncated at (1) [-Wline-truncation]
gplevbin.f:753:5:

  9999 CONTINUE
     1
Warning: Label 9999 at (1) defined but not used

I mean, i can not understand these warnings. do they have any effect on my program running?
I solve the prevous problem but again aother problem has occured!!
[mrakbari2012_at_mahmoudreza fluka]$ cd /home
[mrakbari2012_at_mahmoudreza home]$ /usr/local/fluka/flutil/ldpmqmd
$FLUPRO = /usr/local/fluka
 now linking
/usr/local/fluka
gfortran
mkdir: cannot create directory ‘tmpo’: Permission denied
/usr/local/fluka/flutil/lfluka: line 135: cd: tmpo: No such file or directory
dpmjex.o: Permission denied
eveqmd.o: Permission denied
ls: cannot access 'tmpo/*.o': No such file or directory

ar x /usr/local/fluka/libflukahp.a fluka.o
fluka.o: Permission denied
rm: cannot remove 'flukadpm3.map': No such file or directory
gfortran -msse2 -mfpmath=sse -fPIC -O3 -g -mtune=generic -fexpensive-optimizations -funroll-loops -fstrength-reduce -Wall -Wuninitialized -Wno-tabs -Wline-truncation -Wno-unused-function -Wno-unused-parameter -Wno-unused-dummy-argument -Wno-unused-variable -Wno-conversion -Wunused-label -Waggregate-return -Wcast-align -Wsystem-headers -ftrapping-math -frange-check -fbackslash -fdump-core -fbacktrace -ffpe-trap=invalid,zero,overflow -finit-local-zero -ffixed-form -frecord-marker=4 -funderscoring -fno-automatic -fd-lines-as-comments -fbounds-check -I/usr/local/fluka/flukapro -v -o flukadpm3 -Xlinker -Map -Xlinker flukadpm3.map fluka.o -L/usr/local/fluka -L/usr/local/fluka/interface -L/usr/local/fluka/latestRQMD -ldpmjet3 -lrqmd -lflukahp
Driving: gfortran -msse2 -mfpmath=sse -fPIC -O3 -g -mtune=generic -fexpensive-optimizations -funroll-loops -fstrength-reduce -Wall -Wuninitialized -Wno-tabs -Wline-truncation -Wno-unused-function -Wno-unused-parameter -Wno-unused-dummy-argument -Wno-unused-variable -Wno-conversion -Wunused-label -Waggregate-return -Wcast-align -Wsystem-headers -ftrapping-math -frange-check -fbackslash -fdump-core -fbacktrace -ffpe-trap=invalid,zero,overflow -finit-local-zero -ffixed-form -frecord-marker=4 -funderscoring -fno-automatic -fd-lines-as-comments -fbounds-check -I/usr/local/fluka/flukapro -v -o flukadpm3 -Xlinker -Map -Xlinker flukadpm3.map fluka.o -L/usr/local/fluka -L/usr/local/fluka/interface -L/usr/local/fluka/latestRQMD -ldpmjet3 -lrqmd -lflukahp -l gfortran -l m -shared-libgcc
gfortran: error: fluka.o: No such file or directory
Using built-in specs.
COLLECT_GCC=gfortran
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/6.3.1/lto-wrapper
Target: x86_64-redhat-linux
Configured with: ../configure --enable-bootstrap --enable-languages=c,c++,objc,obj-c++,fortran,ada,go,lto --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-shared --enable-threads=posix --enable-checking=release --enable-multilib --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --with-linker-hash-style=gnu --enable-plugin --enable-initfini-array --disable-libgcj --with-isl --enable-libmpx --enable-gnu-indirect-function --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux
Thread model: posix
gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC)

Please let me know the exact problem?
Best


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Sep 03 2018 - 17:46:17 CEST

This archive was generated by hypermail 2.3.0 : Mon Sep 03 2018 - 17:46:31 CEST