--- Dávid Horváth Junior Researcher Radiation Protection ELI Beamlines E: david.horvath_at_eli-beams.eu T: +420 266 051 283 M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic ________________________________________ From: Abhijit Bhattacharyya <vega_at_barc.gov.in> Sent: 04 December 2018 09:29:16 To: Horváth Dávid Cc: fluka-discuss_at_fluka.org; owner-fluka-discuss_at_mi.infn.it Subject: Re: [fluka-discuss]: New Fluka issue in ubuntu 18.04 Dear david, Thanks for the response. In the first email, I mentioned version details which I am pasting here again. (a) linux kernel: 4.19.6-041906-generic (x86_64), (b) gcc version: 7.3.0-27ubuntu1~18.04 (c) gfortran version: 7.3.0-27ubuntu1~18.04 (d) GNU ld version: 2.30 Any clue? Best Abhijit On 04/12/2018 12:37, Horváth Dávid wrote: > Dear Abhijit, > > could you check the version of the default gfortran compiler on your > machine with "gfortran --version"? Maybe you have multiple gfortran > versions installed at the same time. > > If it isn't gfortran 7, then you need to install the corresponding > FLUKA version. > > The "/home/alfredo/..." in backtrace is normal for FLUKA, since it > comes precompiled. > > Kind regards, > David > > --- > > Dávid Horváth > > Junior Researcher > Radiation Protection > ELI Beamlines > > E: david.horvath_at_eli-beams.eu > T: +420 266 051 283 > M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic > > > ________________________________________ > From: Abhijit Bhattacharyya <vega_at_barc.gov.in> > Sent: 04 December 2018 05:10:01 > To: Horváth Dávid > Cc: fluka-discuss_at_fluka.org > Subject: Re: [fluka-discuss]: New Fluka issue in ubuntu 18.04 > > Dear David, > > Yes, I installed fluka2011.2x-linux-gfor64bit-7.3-AA.tar.gz package. > > The backtrace part is peculiar to me. > > Best > Abhijit > > > On 03/12/2018 12:44, Horváth Dávid wrote: >> Dear Abhijit, >> >> the error message suggests that, you tried to install a FLUKA version >> not compatible with your compiler. Please check if you tried to >> install the fluka2011.2x-linux-gfor64bit-7.3-AA.tar.gz package. >> >> Kind regards, >> Dávid Horváth >> >> Junior Researcher >> Radiation Protection >> ELI Beamlines >> >> E: david.horvath_at_eli-beams.eu >> T: +420 266 051 283 >> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic >> >> >> ________________________________________ >> From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> >> on behalf of Dr. Abhijit Bhattacharyya <vega_at_barc.gov.in> >> Sent: 03 December 2018 06:07:08 >> To: fluka-discuss_at_fluka.org >> Subject: [fluka-discuss]: New Fluka issue in ubuntu 18.04 >> >> Hello! >> >> I installed recently new FLUKA2011.2x followed by flair and flair >> geomviewer in Ubuntu >> OS 18.04 LTS while I find some issues. >> >> First I would like to configuration in my laptop: >> (a) linux kernel: 4.19.6-041906-generic (x86_64), >> (b) gcc version: 7.3.0-27ubuntu1~18.04 >> (c) gfortran version: 7.3.0-27ubuntu1~18.04 >> (d) GNU ld version: 2.30 >> >> I defined FLUFOR and FLUPRO as described. >> >> I faced that my input was not running and then I tried to run >> exfixed.inp as provided in >> fluka distribution as suggested by one of my friend. >> >> I see "timed out" in run status in flair. So I tried to run using >> "rfluka -M 1 >> exfixed.inp" directly from command prompt. I see that "fluka_6423" >> subdirectory is >> formed which contains manyfiles. Here fort.11 points to exfixed001.out >> file which was >> not created. >> >> The peculiar part is that "fluka_6423/exfixed001.log" contains >> following: >> >> vega_at_aditya:~/test$ cat fluka_6423/exfixed001.log >> Fortran runtime error: Incorrect extent in VALUE argument to >> DATE_AND_TIME intrinsic: is >> -140202614629398, should be >=8 >> >> Error termination. Backtrace: >> #0 0x7f8376ac12da in ??? >> #1 0x7f8376ac1ec5 in ??? >> #2 0x7f8376ac21b7 in ??? >> #3 0x7f8376c50fc2 in ??? >> #4 0x564af9cca0db in datimf_ >> at /home/alfredo/fluprogfor/linuxmvax/datimf.f:55 >> #5 0x564af9c16464 in flukam_ >> at /home/alfredo/fluprogfor/mainmvax/flukam.f:1163 >> #6 0x564af9c162fb in fluka >> at /home/alfredo/fluprogfor/mainmvax/fluka.f:307 >> #7 0x564af9c162fb in main >> at /home/alfredo/fluprogfor/mainmvax/fluka.f:310 >> vega_at_aditya:~/test$ >> >> >> The "date-time" error and pointer to "/home/alfredo/..." are something >> not expected. Is >> there anything wrong in my installation? >> >> Please advise. >> Thanks and Regards >> Abhijit Bhattacharyya >> >> -- >> Dr. Abhijit Bhattacharyya >> OFFICE: >> NUCLEAR PHYSICS DIVISION >> Bhabha Atomic Research Center (BARC) >> MUMBAI - 400 085. INDIA >> PHONE: +92-22-2559-2066 >> FAX:- +91-22-2550-5151 >> >> Residence: >> A/13 Deepak >> Anushakti Nagar >> MUMBAI - 400 094. INDIA >> PHONE: +91-22-25580930 >> Mobile: +91-98201-49770 >> >> >> >> __________________________________________________________________________ >> You can manage unsubscription from this mailing list at >> https://www.fluka.org/fluka.php?id=acc_info > > -- > Abhijit Bhattacharyya > Nuclear Physics Division > Bhabha Atomic Research Centre > Mumbai - 400 085 > INDIA > > __________________________________________________________________________ > You can manage unsubscription from this mailing list at > https://www.fluka.org/fluka.php?idŹc_info -- Abhijit Bhattacharyya Nuclear Physics Division Bhabha Atomic Research Centre Mumbai - 400 085 INDIA __________________________________________________________________________ You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_infoReceived on Tue Dec 04 2018 - 13:22:11 CET
This archive was generated by hypermail 2.3.0 : Tue Dec 04 2018 - 13:22:25 CET