... coalescence should be activated (and then rQMD etc linked) if you are
interested in residual nuclei -> hence the check on rQMD. I am not sure
what you did, anyway the "recommended" solution is to leave coalescence
on and link rQMD.
Concerning EVAPORAT, there is indeed a bug in Flair which does not set
what(1) to 3.0 (heavy evaporation), you must do it yourself. If I remember
well a warning about this issue was sent to the list a few months ago.
Cheers
Alfredo
+----------------------------------------------------------------------+
| Alfredo Ferrari || Tel.: +41.22.76.76119 |
| CERN-EN/STI || Fax.: +41.22.76.69474 |
| 1211 Geneva 23 || e-mail: Alfredo.Ferrari_at_cern.ch |
| Switzerland || |
+----------------------------------------------------------------------+
On Fri, 7 Dec 2018, Julien Bonvalet wrote:
> Thank you very much. It works!!!
> Actually, it was the coalescence card that disturbed...
>
> But I can't understand the problem with PHYSICS card "EVAPORATION". There is a bug with FLAIR on WHAT(1).
>
> Best regards
>
> Julien
>
> ----- Mail original -----
> De: "George Kharashvili" <georgek_at_jlab.org>
> À: "Julien Bonvalet" <julien.bonvalet_at_u-bordeaux.fr>
> Cc: "fluka-discuss" <fluka-discuss_at_fluka.org>
> Envoyé: Mercredi 5 Décembre 2018 13:11:58
> Objet: Re: [fluka-discuss]: source.f with RESNUCLEI_IRREPROFIL cards
>
> Hello Julien,
>
> I did not see any timeout errors when running your input, but it fails some checks. The input echo in your .out file may state:
> *** Meaningless PHYSICS/EVAPORAT card, are you sure?? ***
> *** What(1) must be 2, 3 or 4, look at the manual ***
> *** and/or at the release notes ***
> *** Execution terminated ***
>
> For some reason I failed to change What(1) of this PHYSICS card using the flair drop-down selection, but manually editing the card to set What(1)=3.0 fixed the problem.
>
> Another possible check that may have stopped your run is "Coalescence activated and beam above BME limit with no rQMD and no or incompatible IONSPLIT option!" So make sure you link with rQMD when compiling your executable.
>
> You should probably also add IONTRANS card and enable the IRRPROFI card.
>
> Best regards,
> George
>
>
> ----- Original Message -----
> From: "Julien Bonvalet" <julien.bonvalet_at_u-bordeaux.fr>
> To: "FLUKA Discussion List" <fluka-discuss_at_fluka.org>
> Sent: Wednesday, December 5, 2018 3:45:53 AM
> Subject: [fluka-discuss]: source.f with RESNUCLEI_IRREPROFIL cards
>
> Hi dear FLUKA users
>
> I am a new FLUKA user. In my pHD project, I have to model a proton beam from a space phase file.dat (created by a PIC code). I worked a lot on the source.f that I found on the e-archive. It works very well for cards like Dose,energy calculations. But when I add Resnuclei card to model target activation, TIMEOUT appears. I don't understand. Can we use a source.f added with IRREPROFIL/RESNUCLEI and DCYTIMES? When I try to add those cards, I change my source.f activating "radionucleides" but It might be a problem... I can't see the problem.
>
> Thanks a lot
>
>
>
> Julien
>
> CELIA in FRANCE
>
> __________________________________________________________________________
> You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id?c_info
>
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Dec 07 2018 - 11:18:05 CET