AW: [fluka-discuss]: Point source simulation

From: <>
Date: Fri, 6 Sep 2019 06:37:18 +0000

Dear Muhammad

Fluka comes with a large library of predefined isotopes with their corresponding decay spectra. You can simply select ISOTOPE in the BEAM card and then set the desired isotope with the HI-PROBE card (see manual for details). You should also put a RADDECAY card with the desired mode and then set the DCYSCORE card accordingly for the scoring cards that you are using. I guess if you're interested in the activity then semi-analoge mode should suit you. You can find an example for an input file in this post on the Fluka mailing list:


Von: []" im Auftrag von "muhammad mansy []
Gesendet: Dienstag, 3. September 2019 21:47
Betreff: [fluka-discuss]: Point source simulation

Dear Fluka Experts /USERS

i am trying to simulate the detection of a point source for example (Co-60) with its well known energies (1.1 and 1.3) Mev, how could i define these energies in the input file and how can i generate the gamma spectrum for different counting time finally if i want to define its activity how could i do this.

Dr. Muhammad Mansy
PhD in Nuclear Physics
Radioactive waste management Department, Hot Labs center
Egyptian Atomic Energy Authority
Mob: +201142173078+201060895204
Fax: +2046221072
Radioactive waste Department, Hot Labs Center, Egyptian Atomic Energy Authority<>

You can manage unsubscription from this mailing list at
Received on Fri Sep 06 2019 - 09:57:51 CEST

This archive was generated by hypermail 2.3.0 : Fri Sep 06 2019 - 09:58:03 CEST