Hi,
Some points regarding your question from the practical experience of beginner Fluka user:
1 – it is much complicated then just selecting one parameter, you actually need to define the whole sampling process, etc.
2 – there is the written and working routine for circular beam with included angular divergence in the discussion list, so you can use it;
3 – if you need rectangular beam divergence, then you are not so lucky, however, you can refer to the detail description of how to do it provided by F.Salvat-Pujol.
http://pcfluka.mi.infn.it/web_archive/earchive/new-fluka-discuss/15282.html
Regards
Alex
From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> On Behalf Of Ivan Gordeev
Sent: Tuesday, September 17, 2019 10:56
To: fluka-discuss_at_fluka.org
Subject: [fluka-discuss]: how to set angle divergence in source routine?
Hello fluka users and experts!
I have a problem concerning angle divergence setting. I have a source routine, but, how exactly I can set this parameter there? If I set this parameter in BEAM (input file), seems nothing happens. So, I need to change cosines in routine? Or use value DIVBM somehow? How to set angle divergence using source routine correctly?
---
Kind regards,
Ivan
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Wed Sep 18 2019 - 08:33:32 CEST