I'm sure this is it. Trying adding the STEPSIZE card
STEPSIZE 1E-3 .1 [region]
That should be fine for water.
On Fri, Mar 18, 2022 at 4:24 PM Tony Price <T.Price_at_bham.ac.uk> wrote:
> Dear all,
>
>
>
> I am not a fluka user, I was but I went back to geant4 for other projects
> so cannot really comment on how fluka works properly but I have seen this
> shape produced in geant4 before if you do not limit the step lengths in the
> simulation as the higher energy protons interact less the average step
> length is longer and causes this shape. Might not help for fluka but could
> add to the discussion
>
>
>
> Kind regards,
>
>
>
> Tony
>
>
>
> Sent from Mail
> <https://urldefense.com/v3/__https://go.microsoft.com/fwlink/?LinkId=550986__;!!IKRxdwAv5BmarQ!IbY9PP0qHSBJOECbPIBETqdstTI7fPNn0-SwNPXHef42BeuXrhBanIw8nuYqiA$>
> for Windows
>
>
>
> *From: *stefan.mueller_at_hzdr.de
> *Sent: *18 March 2022 09:11
> *To: *Ding, Qi <q.ding_at_fz-juelich.de>
> *Cc: *fluka-discuss_at_fluka.org
> *Subject: *Re: [fluka-discuss]: how to plot a bragg curve without ""zig
> zag""
>
>
>
> OK,
>
>
>
> the plot is now attached and visible. How did you obtain this plot? I
>
> assume we are seeing energy deposition over energy (which is the unit?
>
> MeV? keV?). Which scorer did you use? Which beam particle?
>
>
>
> Cheers,
>
>
>
> Stefan
>
>
>
> --
>
> Stefan E. Mueller
>
> Department of Information Services and Computing - Computational Science
>
> and Institute of Radiation Physics
>
> Helmholtz-Zentrum Dresden-Rossendorf
>
> Tel: +49 (0351) 260 3847
>
> Stefan.Mueller_at_hzdr.de
>
> http://www.hzdr.de
> <https://urldefense.com/v3/__http://www.hzdr.de__;!!IKRxdwAv5BmarQ!IbY9PP0qHSBJOECbPIBETqdstTI7fPNn0-SwNPXHef42BeuXrhBanIwnDGuDGA$>
>
>
>
> Vorstand: Prof. Dr. Sebastian M. Schmidt, Dr. Diana Stiller
>
> Vereinsregister: VR 1693 beim Amtsgericht Dresden
>
>
>
> On Fri, 18 Mar 2022, Ding, Qi wrote:
>
>
>
> >
>
> > Dear Stefan,
>
> >
>
> >
>
> > Thanks for your email.
>
> >
>
> > I hope you can see the attached figure now.
>
> >
>
> >
>
> > Best regards,
>
> >
>
> > Qi Ding
>
> >
>
> >
>
> >
> ____________________________________________________________________________
>
> > From: Stefan E. Mueller <stefan.mueller_at_hzdr.de>
>
> > Sent: 18 March 2022 09:47:02
>
> > To: Ding, Qi
>
> > Cc: fluka-discuss_at_fluka.org
>
> > Subject: Re: [fluka-discuss]: how to plot a bragg curve without ""zig
> zag""
>
> > �
>
> > Dear Qi Ding,
>
> >
>
> > for some reason, the plot you mentioned did not attach to the email,
> could
>
> > you post it again?
>
> >
>
> > Thank you,
>
> >
>
> > �������� Stefan
>
> >
>
> > --
>
> > Stefan E. Mueller
>
> > Department of Information Services and Computing - Computational Science
>
> > and Institute of Radiation Physics
>
> > Helmholtz-Zentrum Dresden-Rossendorf
>
> > Tel: +49 (0351) 260 3847
>
> > Stefan.Mueller_at_hzdr.de
>
> > http://www.hzdr.de
> <https://urldefense.com/v3/__http://www.hzdr.de__;!!IKRxdwAv5BmarQ!IbY9PP0qHSBJOECbPIBETqdstTI7fPNn0-SwNPXHef42BeuXrhBanIwnDGuDGA$>
>
> >
>
> > Vorstand: Prof. Dr. Sebastian M. Schmidt, Dr. Diana Stiller
>
> > Vereinsregister: VR 1693 beim Amtsgericht Dresden
>
> >
>
> > On Thu, 17 Mar 2022, Ding, Qi wrote:
>
> >
>
> > >
>
> > > Dear FLUKA experts,
>
> > >
>
> > >
>
> > > I want to draw a Bragg curve for a proton beam in water as below image.
>
> > > The question is the Bragg curve isn�t smooth and as you can see there
>
> > > evidently exist �zig
>
> > > zag� form in the plateau region. I changed the binning in Z
> direction and
>
> > it
>
> > > appears the same problem again.
>
> > > can anyone tell me, how can I solve this problem?
>
> > > Thanks in advance.
>
> > >
>
> > > plot05
>
> > > Best regards,
>
> > >
>
> > > Qi Ding
>
> > >
>
> > >
>
> > >
>
> > >
>
> >
> >---------------------------------------------------------------------------
>
> >
>
> > > ---------------------
>
> >
> >---------------------------------------------------------------------------
>
> >
>
> > > ---------------------
>
> > > Forschungszentrum Juelich GmbH
>
> > > 52425 Juelich
>
> > > Sitz der Gesellschaft: Juelich
>
> > > Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
>
> > > Vorsitzender des Aufsichtsrats: MinDir Volker Rieke
>
> > > Geschaeftsfuehrung: Prof. Dr.-Ing. Wolfgang Marquardt (Vorsitzender),
>
> > > Karsten Beneke (stellv. Vorsitzender), Prof. Dr. Astrid Lambrecht,
>
> > > Prof. Dr. Frauke Melchior
>
> >
> >---------------------------------------------------------------------------
>
> >
>
> > > ---------------------
>
> >
> >---------------------------------------------------------------------------
>
> >
>
> > > ---------------------
>
> > >
>
> > >
>
> > > Neugierige sind herzlich willkommen am Sonntag, den 21. August 2022,
> von
>
> > > 10:00 bis 17:00 Uhr. Mehr unter: https://www.tagderneugier.de
> <https://urldefense.com/v3/__https://www.tagderneugier.de__;!!IKRxdwAv5BmarQ!IbY9PP0qHSBJOECbPIBETqdstTI7fPNn0-SwNPXHef42BeuXrhBanIxPqp3JRg$>
>
> > >
>
> > >
>
> >
>
> >
>
>
>
--
Ryan Brosch
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Mar 18 2022 - 12:01:17 CET