Dear Fluka discuss,
i am trying to run the attached program but always getting the same
error and no output:
/home/app/fluka/2008.3b//flutil/rfluka: line 338:28712 Aborted (core dumped) ${EXE} <$INPN 2> $LOGF >LOGF
What am i typing down wrong!?
My simulation is a simple proton beam through a microstrip ionization chamber.
I simulated the geometry of the microstrips by making a lattice of 10 of
them and by making a replica of the ten group in 15 containers.
Am i missing something!?
Thank you in advance,
Antonello Carloni
P.s remember that by attaching the file the alignment goes away....
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
TITLE
* Beam divergence and energy on vacuum body detector after Ionization chamber
DEFAULTS 0.0 0.0 0.0 0.0 0.0 0.0 HADROTHE
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
* 65 MeV proton beam, of square section profile 0.02 x 0.02 cm
BEAM -0.065 0.0 0.0 0.02 0.02 0.PROTON
* proton source is set at a distance of 5 cm from ion chamber window
BEAMPOS 0.0 0.0 -5.0 0.0 0.0 0.
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
GEOBEGIN 0.0 0.0 0.0 0.0 0.0 0.COMBNAME
0 0 proton beam on ion chamber
* outer limits of external blackhole
RPP hol -1000.0 +1000.0 -1000.0 +1000.0 -1000.0 +1000.0
* outer limits of vacuum
RPP vac -500.0 +500.0 -500.0 +500.0 -500.0 +500.0
* boundaries of ion chamber
RPP ich -7.5 +7.5 -7.5 +7.5 -0.106 +0.106
* vacuum detector
RPP bec -10.0 +10.0 -10.0 +10.0 +5.0 +5.1
* ionization chamber inlet window plane
XYP BP1 -0.104
* ionization chamber outlet window plane
XYP BP2 +0.096
* plane dividing upstream and downstream detector
XYP PLA +5.05
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
* microstrips to be replicated along the inner outlet window plane
* each microstrip dimensions are 0.5mm(height)x0.5mm(width)x0.5 microns depth
RPP STRI1 -7.5 -7.45 -7.5 +7.5 +0.095 +0.096
RPP STRI2 -7.40 -7.35 -7.5 +7.5 +0.095 +0.096
RPP STRI3 -7.30 -7.25 -7.5 +7.5 +0.095 +0.096
RPP STRI4 -7.20 -7.15 -7.5 +7.5 +0.095 +0.096
RPP STRI5 -7.10 -7.05 -7.5 +7.5 +0.095 +0.096
RPP STRI6 -7.00 -6.95 -7.5 +7.5 +0.095 +0.096
RPP STRI7 -6.90 -6.85 -7.5 +7.5 +0.095 +0.096
RPP STRI8 -6.80 -6.75 -7.5 +7.5 +0.095 +0.096
RPP STRI9 -6.70 -6.65 -7.5 +7.5 +0.095 +0.096
RPP STRI10 -6.60 -6.55 -7.5 +7.5 +0.095 +0.096
* containers for the replicas of the group of 10 strips
* each container is 0.95 cm wide
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
RPP CONT1 -7.5 -6.55 -7.5 +7.5 +0.095 +0.096
RPP CONT2 -6.55 -5.60 -7.5 +7.5 +0.095 +0.096
RPP CONT3 -5.60 -4.65 -7.5 +7.5 +0.095 +0.096
RPP CONT4 -4.65 -3.70 -7.5 +7.5 +0.095 +0.096
RPP CONT5 -3.70 -2.75 -7.5 +7.5 +0.095 +0.096
RPP CONT6 -2.75 -1.80 -7.5 +7.5 +0.095 +0.096
RRP CONT7 -1.80 -0.85 -7.5 +7.5 +0.095 +0.096
RPP CONT8 -0.85 +0.10 -7.5 +7.5 +0.095 +0.096
RPP CONT9 +0.10 +1.05 -7.5 +7.5 +0.095 +0.096
RPP CONT10 +1.05 +2.00 -7.5 +7.5 +0.095 +0.096
RPP CONT11 +2.00 +2.95 -7.5 +7.5 +0.095 +0.096
RPP CONT12 +2.95 +3.90 -7.5 +7.5 +0.095 +0.096
RPP CONT13 +3.90 +4.85 -7.5 +7.5 +0.095 +0.096
RPP CONT14 +4.85 +5.80 -7.5 +7.5 +0.095 +0.096
RPP CONT15 +5.80 +6.75 -7.5 +7.5 +0.095 +0.096
END
* regions
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
* outer black hole
BLK 7 +hol -vac
* vacuum around
VAK 7 +vac -ich -bec
* inlet window
INW 7 +ich +BP1
* out window
OUW 7 +ich -BP2
* ion chamber
DEC 7 +ich +BP2 -BP1
* upstream detector
UPS 7 +bec +PLA
* downstream detector
DWN 7 +bec -PLA
* replicas regions
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
R1 7 +STRI1
R2 7 +STRI2
R3 7 +STRI3
R4 7 +STRI4
R5 7 +STRI5
R6 7 +STRI6
R7 7 +STRI7
R8 7 +STRI8
R9 7 +STRI9
R10 7 +STRI10
END
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
LATTICE CONT1 CONT15 1.0 R1 R10 1.0
GEOEND
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
MATERIAL 6.0 12.0107 2.0 6.0 CARBON
MATERIAL 8.0 15.9994 0.00133 8.0 OXYGEN
MATERIAL 18.0 39.948 0.00166 20.0 ARGON
MATERIAL 4.0 9.0122 1.848 5.0 BERYLLIU
MATERIAL 13.0 26.9815 2.699 10.0 ALUMINUM
MATERIAL 29.0 63.546 8.960 12.0 COPPER
MATERIAL 0.00195 27.0 DIOXIDE
MATERIAL 0.00170 28.0 GAS
COMPOUND 1.0 CARBON 2.0 OXYGEN DIOXIDE
COMPOUND -30.0 DIOXIDE -70.0 ARGON GAS
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
* Material assignment to regions
ASSIGNMAT BLCKHOLE BLK
ASSIGNMAT VACUUM VAK
ASSIGNMAT VACUUM UPS DWN 1.0
ASSIGNMAT ALUMINUM INW INW 1.0
ASSIGNMAT GAS DEC DEC 1.0
ASSIGNMAT BERYLLIU OUW OUW 1.0
ASSIGNMAT COPPER R1 R10 1.0
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
*Fluence and divergence of proton beam through vacuum detector
USRBDX 101.0 208.0 -32.0 UPS DWN 400
USRBDX 0.065 0.0645 50. 0.0001570 0.0 20.0&
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
* Energy released by proton beam into vacuum phantom after Ion Chamber(GeV/g)
USRBIN 10.0 208.0 -17.0 2.5 2.5 0.106
USRBIN -2.5 -2.5 -0.106 100. 100. 40.0&
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
RANDOMIZE 1.0
START 10.
STOP
Received on Tue May 04 2010 - 17:51:54 CEST
This archive was generated by hypermail 2.2.0 : Tue May 04 2010 - 17:51:55 CEST