Re: problems in running lattice like program

Dear Antonello,

just few fundamental remarks to restart:

- the container regions are missing. You defined the bodies (CONT1 ...
CONT15), but not the respective regions in the region list. By the way,
CONT1 is not needed, since it is the volume already taken by your
prototype
- the ROT-DEFI transformations are missing. You need to define a
translation for each container, in order to bring it to superimpose on
the prototype
- you need 14 LATTICE cards, in order to associate each container region
to the respective transformation. In the LATTICE card, WHAT(4) is
intended to be just an identifier for each lattice cell, not related to
any geometry name previously defined

Ciao

Francesco

**************************************************
Francesco Cerutti
CERN-EN/STI
CH-1211 Geneva 23
Switzerland
tel. ++41 22 7678962
fax ++41 22 7668854

On Tue, 4 May 2010, ANTONELLO CARLONI wrote:

> Dear Fluka discuss,
> i am trying to run the attached program but always getting the same
> error and no output:
>
> /home/app/fluka/2008.3b//flutil/rfluka: line 338:28712 Aborted (core dumped) ${EXE} <$INPN 2> $LOGF >LOGF
>
> What am i typing down wrong!?
> My simulation is a simple proton beam through a microstrip ionization chamber.
> I simulated the geometry of the microstrips by making a lattice of 10 of
> them and by making a replica of the ten group in 15 containers.
> Am i missing something!?
> Thank you in advance,
> Antonello Carloni
> P.s remember that by attaching the file the alignment goes away....
>
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> TITLE
> * Beam divergence and energy on vacuum body detector after Ionization chamber
> DEFAULTS 0.0 0.0 0.0 0.0 0.0 0.0 HADROTHE
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> * 65 MeV proton beam, of square section profile 0.02 x 0.02 cm
> BEAM -0.065 0.0 0.0 0.02 0.02 0.PROTON
> * proton source is set at a distance of 5 cm from ion chamber window
> BEAMPOS 0.0 0.0 -5.0 0.0 0.0 0.
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> GEOBEGIN 0.0 0.0 0.0 0.0 0.0 0.COMBNAME
> 0 0 proton beam on ion chamber
> * outer limits of external blackhole
> RPP hol -1000.0 +1000.0 -1000.0 +1000.0 -1000.0 +1000.0
> * outer limits of vacuum
> RPP vac -500.0 +500.0 -500.0 +500.0 -500.0 +500.0
> * boundaries of ion chamber
> RPP ich -7.5 +7.5 -7.5 +7.5 -0.106 +0.106
> * vacuum detector
> RPP bec -10.0 +10.0 -10.0 +10.0 +5.0 +5.1
> * ionization chamber inlet window plane
> XYP BP1 -0.104
> * ionization chamber outlet window plane
> XYP BP2 +0.096
> * plane dividing upstream and downstream detector
> XYP PLA +5.05
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> * microstrips to be replicated along the inner outlet window plane
> * each microstrip dimensions are 0.5mm(height)x0.5mm(width)x0.5 microns depth
> RPP STRI1 -7.5 -7.45 -7.5 +7.5 +0.095 +0.096
> RPP STRI2 -7.40 -7.35 -7.5 +7.5 +0.095 +0.096
> RPP STRI3 -7.30 -7.25 -7.5 +7.5 +0.095 +0.096
> RPP STRI4 -7.20 -7.15 -7.5 +7.5 +0.095 +0.096
> RPP STRI5 -7.10 -7.05 -7.5 +7.5 +0.095 +0.096
> RPP STRI6 -7.00 -6.95 -7.5 +7.5 +0.095 +0.096
> RPP STRI7 -6.90 -6.85 -7.5 +7.5 +0.095 +0.096
> RPP STRI8 -6.80 -6.75 -7.5 +7.5 +0.095 +0.096
> RPP STRI9 -6.70 -6.65 -7.5 +7.5 +0.095 +0.096
> RPP STRI10 -6.60 -6.55 -7.5 +7.5 +0.095 +0.096
> * containers for the replicas of the group of 10 strips
> * each container is 0.95 cm wide
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> RPP CONT1 -7.5 -6.55 -7.5 +7.5 +0.095 +0.096
> RPP CONT2 -6.55 -5.60 -7.5 +7.5 +0.095 +0.096
> RPP CONT3 -5.60 -4.65 -7.5 +7.5 +0.095 +0.096
> RPP CONT4 -4.65 -3.70 -7.5 +7.5 +0.095 +0.096
> RPP CONT5 -3.70 -2.75 -7.5 +7.5 +0.095 +0.096
> RPP CONT6 -2.75 -1.80 -7.5 +7.5 +0.095 +0.096
> RRP CONT7 -1.80 -0.85 -7.5 +7.5 +0.095 +0.096
> RPP CONT8 -0.85 +0.10 -7.5 +7.5 +0.095 +0.096
> RPP CONT9 +0.10 +1.05 -7.5 +7.5 +0.095 +0.096
> RPP CONT10 +1.05 +2.00 -7.5 +7.5 +0.095 +0.096
> RPP CONT11 +2.00 +2.95 -7.5 +7.5 +0.095 +0.096
> RPP CONT12 +2.95 +3.90 -7.5 +7.5 +0.095 +0.096
> RPP CONT13 +3.90 +4.85 -7.5 +7.5 +0.095 +0.096
> RPP CONT14 +4.85 +5.80 -7.5 +7.5 +0.095 +0.096
> RPP CONT15 +5.80 +6.75 -7.5 +7.5 +0.095 +0.096
> END
> * regions
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> * outer black hole
> BLK 7 +hol -vac
> * vacuum around
> VAK 7 +vac -ich -bec
> * inlet window
> INW 7 +ich +BP1
> * out window
> OUW 7 +ich -BP2
> * ion chamber
> DEC 7 +ich +BP2 -BP1
> * upstream detector
> UPS 7 +bec +PLA
> * downstream detector
> DWN 7 +bec -PLA
> * replicas regions
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> R1 7 +STRI1
> R2 7 +STRI2
> R3 7 +STRI3
> R4 7 +STRI4
> R5 7 +STRI5
> R6 7 +STRI6
> R7 7 +STRI7
> R8 7 +STRI8
> R9 7 +STRI9
> R10 7 +STRI10
> END
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> LATTICE CONT1 CONT15 1.0 R1 R10 1.0
> GEOEND
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> MATERIAL 6.0 12.0107 2.0 6.0 CARBON
> MATERIAL 8.0 15.9994 0.00133 8.0 OXYGEN
> MATERIAL 18.0 39.948 0.00166 20.0 ARGON
> MATERIAL 4.0 9.0122 1.848 5.0 BERYLLIU
> MATERIAL 13.0 26.9815 2.699 10.0 ALUMINUM
> MATERIAL 29.0 63.546 8.960 12.0 COPPER
> MATERIAL 0.00195 27.0 DIOXIDE
> MATERIAL 0.00170 28.0 GAS
> COMPOUND 1.0 CARBON 2.0 OXYGEN DIOXIDE
> COMPOUND -30.0 DIOXIDE -70.0 ARGON GAS
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> * Material assignment to regions
> ASSIGNMAT BLCKHOLE BLK
> ASSIGNMAT VACUUM VAK
> ASSIGNMAT VACUUM UPS DWN 1.0
> ASSIGNMAT ALUMINUM INW INW 1.0
> ASSIGNMAT GAS DEC DEC 1.0
> ASSIGNMAT BERYLLIU OUW OUW 1.0
> ASSIGNMAT COPPER R1 R10 1.0
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> *Fluence and divergence of proton beam through vacuum detector
> USRBDX 101.0 208.0 -32.0 UPS DWN 400
> USRBDX 0.065 0.0645 50. 0.0001570 0.0 20.0&
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> * Energy released by proton beam into vacuum phantom after Ion Chamber(GeV/g)
> USRBIN 10.0 208.0 -17.0 2.5 2.5 0.106
> USRBIN -2.5 -2.5 -0.106 100. 100. 40.0&
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> RANDOMIZE 1.0
> START 10.
> STOP
>
>
>
>
Received on Tue May 04 2010 - 18:33:39 CEST