(no subject)

Gecko/20120428 Thunderbird/12.0.1
MIME-Version: 1.0
To: Stefano Sinigardi <Stefano.Sinigardi_at_bo.infn.it>
CC: <fluka-discuss_at_fluka.org>, Alfredo Ferrari <alfredo.ferrari_at_cern.ch>
Subject: Re: [FLUKA] Secondary electron emission
References: <201206131744.q5DHiaKv006237_at_smtp1.mi.infn.it>
In-Reply-To: <201206131744.q5DHiaKv006237_at_smtp1.mi.infn.it>
Content-Type: text/plain; charset="windows-1252"; format=flowed
Content-Transfer-Encoding: 8bit
X-Originating-IP: [46.126.50.59]
Keywords: CERN SpamKiller Note: -50
X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.2.7
(smtp1.mi.infn.it [192.84.138.69]); Wed, 13 Jun 2012 22:25:58 +0200 (CEST)
Sender: owner-fluka-discuss_at_mi.infn.it

Dear Stefano,
   try to get the new version of flair, it should not be marked as an
error anymore.
V.
On 13/06/2012 19:42, Stefano Sinigardi wrote:
> Dear Alfredo,
> thanks a lot for your help. My input file is attached (I hope it works!)
> Flair is telling me that there's an error in the EMFCUT, but it runs
> correctly and also those values were set from Flair itself...
> Anyway, I hope I'm on the right path with what I need to do...
> At the moment I'm just trying to figure out if multiplying by the
> solid angle and the bin width the number that I get using fluence is
> "really" the number of electrons that are created per primary particle
> (proton). I'm not sure about that also because I think that the manual
> is not fully clear on fluence vs current.
> Now I'll also need a way to extract the phase space details of the
> protons
> and the electrons (x, y, z, px, py, pz) and another way to use a
> similar distribution as an input beam... But I'll work on that in the
> following days, if you can confirm that, as a basis, this input file
> should work to describe delta electron production from the
> interaction of a proton beam on a copper target.
>
> Best regards,
>
> Stefano
>

-- 
Dr. Vittorio Boccone - University of Geneva
o Address:
   UniGe: Département de physique nucléaire et corpusculaire
          24 Quai Ernest-Ansermet, CH-1211 Geneve 4, Switzerland
   CERN:  CERN, CH-1211 Geneve 23, Switzerland
o E-mail:
   vittorio.boccone_at_unige.ch
   vittorio.boccone_at_cern.ch
o Phone:
   Mobile: +41 76 487 5737
   UniGe:  +41 22 379 6357/6353
   CERN:   +41 22 767 5821